DOWNLOAD Sony DSC-RX1 / DSC-RX1R (serv.man2) Service Manual ↓ Size: 6.86 MB | Pages: 28 in PDF or view online for FREE

Model
DSC-RX1 DSC-RX1R (serv.man2)
Pages
28
Size
6.86 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-rx1-dsc-rx1r-sm2.pdf
Date

Sony DSC-RX1 / DSC-RX1R (serv.man2) Service Manual ▷ View online

DSC-RX1/RX1R_L2
1-1
1. SERVICE  NOTE
1-1.  NOTES ON REPLACING THE SY-1001 BOARD
DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATION DATA WRITE”.
RESTORE DATA
When you replace to the repairing board, get the data from the former one.
Start the Adjust Manual in the Adjust Station and perform “RESTORE DATA” to get the data. 
The data getting for this model is as follows.
• PRODUCT ID & USB SERIAL No.
• Angular Velocity Sensor Sensitivity adjustment
• AWB standard data input & check, Color reproduction check
• Strobe adjustment
• Lens data carry
Regarding the PlayMemories Home
PlayMemories Home has been written in internal memory.
The SY-1001 board for service is supplied with PlayMemories Home pre-installed.
USB Serial No. and Product ID
The unit is shipped after an ID (USB Serial No.) unique to each unit and an ID (Product ID) unique to each model have been written.
These IDs have not been written in a new board for service, and therefore they must be entered after the board replacement.
After the board has been replaced with a board for service, start the Adjust Manual in the Adjust Station and execute the “PRODUCT ID & USB 
SERIAL No. INPUT” and enter these IDs.
Note:  A newly entered Product ID is not always equal to the ID before board replacement. If the new ID differs from the previous ID, it may cause a difference 
from the ID registered by the customer.
Lens Data Carry
When replacing the main board, read the QR code given on the Data Carry QR Seal attached to the JK-1002 Flexible Board.
Start the Adjust Manual and read the QR code using a QR code reader.
To read data from the main board, execute [Lens data carry] on the ADJUST tab of the Adjust Manual and read the previous data before the main board 
is replaced using [ORIGINAL DATA READ AND SAVE].
The read data is used for adjustment after replacement. When adjustment, execute [LOAD] from [Lens data carry] on the ADJUST tab of the Adjust 
Manual.
1-2.  NOTES ON REPLACING THE LENS
When replacing the lens, read the QR code given on the data sheet of the replacement 
lens for service.
Remove the Data Carry QR Seal and stick it to the JK-1002 Flexible Board. (For details, 
refer to “Assembly-1: Notes on Assembling the IM Imager Unit and Lens Block.”)
Start the Adjust Manual and read the QR code using a QR code reader.
The read data is used for adjustment after replacement. When adjustments, Select [Lens 
data carry] on the ADJUST tab of the Adjust Manual, and click the [LOAD] button to 
load the file.
Data carry QR seal
– ENGLISH –
1-3.  NOTES ON REMOVING/INSTALLING THE IMAGER BOARD
With the following features, this unit is likely to capture foreign particles.
• The imager sensor size is large.
• The space between the imager sensor and the lens is small.
Therefore, pay close attention to foreign particles.
1-4.  NOTES ON REPLACING THE LSV-1600A DEVICE AND THE IM IMAGER UNIT
1)   When replacing the LSV-1600A Device or the IM Imager Unit, read values from the IM Data Carry Seal and the Lens Data Carry QR Seal shown 
in the figure below, and then write down the read values.
 
Lens data carry QR seal
IM data carry seal
Lens data carry QR seal 
(Describing lens tilting amount)
IM data carry seal  
(Describing imager tilting amount) 
00000014
-14.77   10.30
1058300067
X -5.8 
Y
 +0.7
2)  Start “Shim Selection Tool Ver_[].[].exe.”
 
Enter each recorded value into “Shim Selection Tool Ver_[].[].exe” according to the figure below, and then click [OK].
Note: Download “Shim Selection Tool Ver_[].[].exe” from the TISS homepage.
 
Lens data carry QR seal
IM data carry seal
Enter the values provided on the seats attached to the lens block
and the rear tube. Then click the [OK] button.
1058300067
X -5.8  Y +0.7
00000014
-14.77   10.30
DSC-RX1/RX1R_L2
1-2
– ENGLISH –
3)  The thicknesses of the shims to be used are displayed on the screen.
 
 
Select shims that correspond to the displayed thicknesses from following table.
Part Number
Thickness (mm)
Part Number
Thickness (mm)
4-443-059-01
0.12±0.005
4-443-060-31
0.38±0.005
4-443-059-11
0.14±0.005
4-443-060-41
0.40±0.005
4-443-059-21
0.16±0.005
4-443-060-51
0.42±0.005
4-443-059-31
0.18±0.005
4-443-060-61
0.44±0.005
4-443-059-41
0.20±0.005
4-443-060-71
0.46±0.005
4-443-059-51
0.22±0.005
4-443-060-81
0.48±0.005
4-443-059-61
0.24±0.005
4-443-060-91
0.50±0.005
4-443-059-71
0.26±0.005
4-443-061-01
0.52±0.005
4-443-059-81
0.28±0.005
4-443-061-11
0.54±0.005
4-443-059-91
0.30±0.005
4-443-061-21
0.56±0.005
4-443-060-01
0.32±0.005
4-443-061-31
0.58±0.005
4-443-060-11
0.34±0.005
4-443-061-41
0.60±0.005
4-443-060-21
0.36±0.005
4)  Install the imager and adjust the flange back.
1-5.  ADDITION OF DESTINATION DATA FILE
If the Destination Data file included in the Adjust manual is old, “DESTINATION DATA WRITE” cannot be executed in some cases.
In that case, download a new Destination Data file from the TISS homepage according to the following procedure.
Note 1:  To perform Destination Data Write for this model, the Adjust manual of the DSC-WX50 series must have been installed.
 
Install the Adjust manual of the DSC-WX50 series in advance.
Note 2:  The actual image may differ from the image shown above.
1)  If the Destination Data file in the Adjust manual in use is old, the window shown in Fig. 1 is displayed.
 
Click the [OK] button.
 Fig. 
1
2)  The Destination Data Write window opens.
 
Check the version of the Destination Data file retained in the Adjust manual.
Destination Ver. window
3)  Search the model whose new Destination Data file you want to get on the TISS homepage.
 
When the Destination Data file has been updated, a file with a name “Destination File For ‘model name’.zip” is registered.
(Example) Destination File For DSC-WX50.zip
Furthermore, the version supported by the Destination Data file is shown in the Remarks column.
Note : If the Destination Data file has not been updated, contact the Service Headquarters.
 
DSC-RX1/RX1R_L2
1-3
4)  Download the Destination Data file of the relevant model and unzip the file.
5)  Execute “DESTINATION DATA WRITE” in the Adjust tab of the Adjust manual.
 
Click the [START] button.
6)  Click the [File Update] button in the window.
 
– ENGLISH –
7)  A file selection screen opens. Select the Destination Data file to be added and click the [Open] button.
 
8)  When the file has been successfully added, the following window opens.
 
9)  Check the Destination Ver. window and confirm that the version has been updated.
Destination Ver. window
DSC-RX1/RX1R_L2
1-4
1-6. SELF-DIAGNOSIS FUNCTION
1-6-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis func-
tion starts working, and displays on the LCD screen what to do.
Details of the self-diagnosis functions are provided in the Instruction 
manual.
1-6-2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen shows 
a 4-digit display consisting of an alphabet and numbers, which blinks at 
3.2 Hz. This 5-character display indicates the “repaired by:”, “block” in 
which the problem occurred, and “detailed code” of the problem.
0 0
3 2
C
Repaired by:
Refer to “1-6-3. Self-diagnosis Code Tabl e”.
Indicates the appropriate
step to be taken.
E.g.
13 ....Format the “memory card”.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
E : Corrected by service
engineer
LCD screen
– ENGLISH –
1-6-3. Self-diagnosis Code Table
Self-diagnosis Code
Symptom/State
Correction
Repaired by:
Block
Function
Detailed
Code
C
1
3
0
1
The internal memory has experienced a 
media error.
Turn the power off and on again.
The internal memory has experienced a 
format error.
Turn the power off and on again.
Memory card is unformatted.
Format the memory card.
Memory card is broken.
Insert a new memory card.
Memory card type error.
Insert a supported memory card.
The camera cannot read or write data on 
the memory card.
Turn the power off and on again, or taking out and inserting the memory 
card several times.
C
3
2
0
1
Trouble with hardware.
Turn the power off and on again.
E
4
1
0
0* Abnormality of network control.
Turn the power off and on again.
E
4
1
0
1* Abnormality of network control device.
Turn the power off and on again.
E
6
1
0
0
Difficult to adjust focus.
(Cannot initialize focus)
Retry turn the power on by the power switch. If it does not recover, check 
the focus reset sensor of lens block (pin qa, qd, e;, es of CN101 on the 
CD-1001 board). If it is OK, check the focus motor drive IC (IC102 and 
IC103 on the CD-1001 board).
E
6
1
1
0*
Zoom operations fault.
(Cannot initialize zoom lens.)
Turn the power off and on again.
E
6
1
3
0
Reset position detection error on the step-
per iris initializing.
Turn the power off and on again.
E
6
2
0
0
Handshake correction function does not 
work well. (With PITCH angular velocity 
sensor output stopped.)
Inspect PITCH angular velocity sensors (SE201 on the SY-1002 board) 
peripheral circuits.
E
6
2
0
1
Handshake correction function does not 
work well. (With YAW angular velocity 
sensor output stopped.)
Inspect YAW angular velocity sensors (SE201 on the SY-1002 board) 
peripheral circuits.
E
6
2
0
2
Abnormality of IC for steadyshot.
Check or replacement of the IC for steadyshot (IC201 on the SY-1002  
board).
E
6
2
1
0* Lens initializing failure.
Turn the power off and on again.
E
6
2
1
1 * Lens overheating (PITCH).
Turn the power off and on again.
E
6
2
1
2* Lens overheating (YAW).
Turn the power off and on again.
E
6
2
2
0* Abnormality of thermistor.
Turn the power off and on again.
E
9
1
0
1
Abnormality when flash is being charged. Checking of flash unit or replacement of flash unit. (Note 1)
E
9
2
0
0
Non-standard battery is used. 
Use the specified battery. 
E
9
4
0
0
Internal memory fault.
Inspect the internal memory (IC202 on the SY-1001 board).
E
9
5
0
0* GPS hardware error.
Turn the power off and on again.
E
9
5
0
1*
Acceleration sensor hardware error. 
(GPS hardware error)
Turn the power off and on again.
E
9
5
0
2*
Electronic compass hardware error.
(GPS hardware error)
Turn the power off and on again.
Note 1: After repair, be sure to perform “1-7 . PROCESS AFTER FIXING FLASH ERROR”.
Note 2: Functions of codes with * mark are not provided in this unit.
Page of 28
Display

Sony DSC-RX1 / DSC-RX1R (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sony DSC-RX1 / DSC-RX1R (serv.man2) Service Manual ↓ Size: 6.86 MB | Pages: 28 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DSC-RX1 / DSC-RX1R (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DSC-RX1 / DSC-RX1R (serv.man2) Digital Camera. Information contained in Sony DSC-RX1 / DSC-RX1R (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.