Sony DSC-RX1 / DSC-RX1R (serv.man2) Service Manual ▷ View online
DSC-RX1/RX1R_L2
3-2E
Assembly-6: Notes on Assembling the FM Dial.
Install the FM Dial Base, align the projection with groove.
Install the FM Ring, as shown in the figure.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
Install the FM Plate to the FM Dial. as shown with in the figure.
FM Dial Base
Projection
Non rib
Projection
Hole
Groove
FM Ring
FM Ring
FM Dial
FM Dial
Base
Base
FM Dial
Dial
FM Plate
Install the FM Plate and FM Dial.
Rotate the FM Dial Base.
Rotate the FM Dial Base.
When you assemble, adjust
the position as below.
the position as below.
Apply the certain grease
(0.001g)
(0.001g)
Apply the certain grease
(0.001g)
(0.001g)
JK-1002 Flexible
Board
Board
Assembly-7: Notes on Assembling the Top Inner.
Top Inner
Apply the certain grease
(0.04g)
(0.04g)
Apply the certain grease that comes with BALL, STEEL ASSY
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
Assembly-8: Notes on Replacing the Optical Filter Block.
Method of Removal
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
the spacer sheet.
*
*
Please wait until the adhesive strength of the spacer sheet gets
weaker.
(2) Detach the spacer sheet from the omega unit.
Method of Attachment
(1) Attach the Optical filter block to the spacer sheet to make the entire area
(1) Attach the Optical filter block to the spacer sheet to make the entire area
of the optical filter block uniform.
*
*
Replace the spacer sheet due to the deformation of
spacer sheet and the decrease in the adhesive strength of the
double-faced adhesive tape.
*
The two-layer side of the optical filter block is on the omega unit side.
(2) Attach the optical filter block and spacer sheet to the omega unit so that
the entire area of the spacer sheet
is uniform.
*
Be very careful to prevent dust and foreign objects from entering
during this work.
Pour the solvent (alcohol or liquid cleaner)
between the omega unit and the spacer sheet.
between the omega unit and the spacer sheet.
Spacer Sheet
Omega Unit
Optical filter block replacing method
The two-layer side is on
the omega unit side.
the omega unit side.
Mount
Side
Side
Omega unit
Side
Side
Mount
Side
Side
Omega unit
Side
Side
Optical Filter Block
RX1
RX1R
取り外し方
(1)
(1)
オメガユニットと間隔シートの間に溶剤(アルコールまたはクリーニン
グ液)を流し込む。
*
*
間隔シートの粘着力が弱くなるのを待ってください。
(2)
オメガユニットから間隔シート,光学フィルタブロックを取り外す。
組み付け方
(1)
(1)
間隔シートに対し,上下左右が均一になるように
光学フィルタブロックを貼り付ける。
*
間隔シートは変形、または両面接着力低下するため、
交換してください。
*
光学フィルタブロックは2層側がイメージャー側に
なります。
(2)
オメガユニットに対し,上下左右が均一になるように
間隔シート,光学フィルタブロックを貼り付ける。
*
ゴミ侵入には十分注意して作業をお願いします。
オメガユニットと間隔シートの間に溶剤
(アルコールまたはクリーニング液)
を流し込む。
(アルコールまたはクリーニング液)
を流し込む。
間隔シート
オメガユニット
光学フィルタブロックの交換方法
2
層側が
オメガユニット側
マウント
側
側
オメガ
ユニット
側
ユニット
側
光学フィルタブロック
RX1
マウント
側
側
オメガ
ユニット
側
ユニット
側
RX1R
DSC-RX1/RX1R_L2
3-2E
Assembly-6: Notes on Assembling the FM Dial.
Install the FM Dial Base, align the projection with groove.
Install the FM Ring, as shown in the figure.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
Install the FM Plate to the FM Dial. as shown with in the figure.
FM Dial Base
Projection
Non rib
Projection
Hole
Groove
FM Ring
FM Ring
FM Dial
FM Dial
Base
Base
FM Dial
Dial
FM Plate
Install the FM Plate and FM Dial.
Rotate the FM Dial Base.
Rotate the FM Dial Base.
When you assemble, adjust
the position as below.
the position as below.
Apply the certain grease
(0.001g)
(0.001g)
Apply the certain grease
(0.001g)
(0.001g)
JK-1002 Flexible
Board
Board
Assembly-7: Notes on Assembling the Top Inner.
Top Inner
Apply the certain grease
(0.04g)
(0.04g)
Apply the certain grease that comes with BALL, STEEL ASSY
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
Assembly-8: Notes on Replacing the Optical Filter Block.
Method of Removal
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
the spacer sheet.
*
*
Please wait until the adhesive strength of the spacer sheet gets
weaker.
(2) Detach the spacer sheet from the omega unit.
Method of Attachment
(1) Attach the Optical filter block to the spacer sheet to make the entire area
(1) Attach the Optical filter block to the spacer sheet to make the entire area
of the optical filter block uniform.
*
*
Replace the spacer sheet due to the deformation of
spacer sheet and the decrease in the adhesive strength of the
double-faced adhesive tape.
*
The two-layer side of the optical filter block is on the omega unit side.
(2) Attach the optical filter block and spacer sheet to the omega unit so that
the entire area of the spacer sheet
is uniform.
*
Be very careful to prevent dust and foreign objects from entering
during this work.
Pour the solvent (alcohol or liquid cleaner)
between the omega unit and the spacer sheet.
between the omega unit and the spacer sheet.
Spacer Sheet
Omega Unit
Optical filter block replacing method
The two-layer side is on
the omega unit side.
the omega unit side.
Mount
Side
Side
Omega unit
Side
Side
Mount
Side
Side
Omega unit
Side
Side
Optical Filter Block
RX1
RX1R
取り外し方
(1)
(1)
オメガユニットと間隔シートの間に溶剤(アルコールまたはクリーニン
グ液)を流し込む。
*
*
間隔シートの粘着力が弱くなるのを待ってください。
(2)
オメガユニットから間隔シート,光学フィルタブロックを取り外す。
組み付け方
(1)
(1)
間隔シートに対し,上下左右が均一になるように
光学フィルタブロックを貼り付ける。
*
間隔シートは変形、または両面接着力低下するため、
交換してください。
*
光学フィルタブロックは2層側がイメージャー側に
なります。
(2)
オメガユニットに対し,上下左右が均一になるように
間隔シート,光学フィルタブロックを貼り付ける。
*
ゴミ侵入には十分注意して作業をお願いします。
オメガユニットと間隔シートの間に溶剤
(アルコールまたはクリーニング液)
を流し込む。
(アルコールまたはクリーニング液)
を流し込む。
間隔シート
オメガユニット
光学フィルタブロックの交換方法
2
層側が
オメガユニット側
マウント
側
側
オメガ
ユニット
側
ユニット
側
光学フィルタブロック
RX1
マウント
側
側
オメガ
ユニット
側
ユニット
側
RX1R
DSC-RX1/RX1R_L2
3-2E
Assembly-6: Notes on Assembling the FM Dial.
Install the FM Dial Base, align the projection with groove.
Install the FM Ring, as shown in the figure.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
Install the FM Plate to the FM Dial. as shown with in the figure.
FM Dial Base
Projection
Non rib
Projection
Hole
Groove
FM Ring
FM Ring
FM Dial
FM Dial
Base
Base
FM Dial
Dial
FM Plate
Install the FM Plate and FM Dial.
Rotate the FM Dial Base.
Rotate the FM Dial Base.
When you assemble, adjust
the position as below.
the position as below.
Apply the certain grease
(0.001g)
(0.001g)
Apply the certain grease
(0.001g)
(0.001g)
JK-1002 Flexible
Board
Board
Assembly-7: Notes on Assembling the Top Inner.
Top Inner
Apply the certain grease
(0.04g)
(0.04g)
Apply the certain grease that comes with BALL, STEEL ASSY
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
Assembly-8: Notes on Replacing the Optical Filter Block.
Method of Removal
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
the spacer sheet.
*
*
Please wait until the adhesive strength of the spacer sheet gets
weaker.
(2) Detach the spacer sheet from the omega unit.
Method of Attachment
(1) Attach the Optical filter block to the spacer sheet to make the entire area
(1) Attach the Optical filter block to the spacer sheet to make the entire area
of the optical filter block uniform.
*
*
Replace the spacer sheet due to the deformation of
spacer sheet and the decrease in the adhesive strength of the
double-faced adhesive tape.
*
The two-layer side of the optical filter block is on the omega unit side.
(2) Attach the optical filter block and spacer sheet to the omega unit so that
the entire area of the spacer sheet
is uniform.
*
Be very careful to prevent dust and foreign objects from entering
during this work.
Pour the solvent (alcohol or liquid cleaner)
between the omega unit and the spacer sheet.
between the omega unit and the spacer sheet.
Spacer Sheet
Omega Unit
Optical filter block replacing method
The two-layer side is on
the omega unit side.
the omega unit side.
Mount
Side
Side
Omega unit
Side
Side
Mount
Side
Side
Omega unit
Side
Side
Optical Filter Block
RX1
RX1R
取り外し方
(1)
(1)
オメガユニットと間隔シートの間に溶剤(アルコールまたはクリーニン
グ液)を流し込む。
*
*
間隔シートの粘着力が弱くなるのを待ってください。
(2)
オメガユニットから間隔シート,光学フィルタブロックを取り外す。
組み付け方
(1)
(1)
間隔シートに対し,上下左右が均一になるように
光学フィルタブロックを貼り付ける。
*
間隔シートは変形、または両面接着力低下するため、
交換してください。
*
光学フィルタブロックは2層側がイメージャー側に
なります。
(2)
オメガユニットに対し,上下左右が均一になるように
間隔シート,光学フィルタブロックを貼り付ける。
*
ゴミ侵入には十分注意して作業をお願いします。
オメガユニットと間隔シートの間に溶剤
(アルコールまたはクリーニング液)
を流し込む。
(アルコールまたはクリーニング液)
を流し込む。
間隔シート
オメガユニット
光学フィルタブロックの交換方法
2
層側が
オメガユニット側
マウント
側
側
オメガ
ユニット
側
ユニット
側
光学フィルタブロック
RX1
マウント
側
側
オメガ
ユニット
側
ユニット
側
RX1R
DSC-RX1/RX1R_L2
3-2E
Assembly-6: Notes on Assembling the FM Dial.
Install the FM Dial Base, align the projection with groove.
Install the FM Ring, as shown in the figure.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
Install the FM Plate to the FM Dial. as shown with in the figure.
FM Dial Base
Projection
Non rib
Projection
Hole
Groove
FM Ring
FM Ring
FM Dial
FM Dial
Base
Base
FM Dial
Dial
FM Plate
Install the FM Plate and FM Dial.
Rotate the FM Dial Base.
Rotate the FM Dial Base.
When you assemble, adjust
the position as below.
the position as below.
Apply the certain grease
(0.001g)
(0.001g)
Apply the certain grease
(0.001g)
(0.001g)
JK-1002 Flexible
Board
Board
Assembly-7: Notes on Assembling the Top Inner.
Top Inner
Apply the certain grease
(0.04g)
(0.04g)
Apply the certain grease that comes with BALL, STEEL ASSY
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
Assembly-8: Notes on Replacing the Optical Filter Block.
Method of Removal
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
the spacer sheet.
*
*
Please wait until the adhesive strength of the spacer sheet gets
weaker.
(2) Detach the spacer sheet from the omega unit.
Method of Attachment
(1) Attach the Optical filter block to the spacer sheet to make the entire area
(1) Attach the Optical filter block to the spacer sheet to make the entire area
of the optical filter block uniform.
*
*
Replace the spacer sheet due to the deformation of
spacer sheet and the decrease in the adhesive strength of the
double-faced adhesive tape.
*
The two-layer side of the optical filter block is on the omega unit side.
(2) Attach the optical filter block and spacer sheet to the omega unit so that
the entire area of the spacer sheet
is uniform.
*
Be very careful to prevent dust and foreign objects from entering
during this work.
Pour the solvent (alcohol or liquid cleaner)
between the omega unit and the spacer sheet.
between the omega unit and the spacer sheet.
Spacer Sheet
Omega Unit
Optical filter block replacing method
The two-layer side is on
the omega unit side.
the omega unit side.
Mount
Side
Side
Omega unit
Side
Side
Mount
Side
Side
Omega unit
Side
Side
Optical Filter Block
RX1
RX1R
取り外し方
(1)
(1)
オメガユニットと間隔シートの間に溶剤(アルコールまたはクリーニン
グ液)を流し込む。
*
*
間隔シートの粘着力が弱くなるのを待ってください。
(2)
オメガユニットから間隔シート,光学フィルタブロックを取り外す。
組み付け方
(1)
(1)
間隔シートに対し,上下左右が均一になるように
光学フィルタブロックを貼り付ける。
*
間隔シートは変形、または両面接着力低下するため、
交換してください。
*
光学フィルタブロックは2層側がイメージャー側に
なります。
(2)
オメガユニットに対し,上下左右が均一になるように
間隔シート,光学フィルタブロックを貼り付ける。
*
ゴミ侵入には十分注意して作業をお願いします。
オメガユニットと間隔シートの間に溶剤
(アルコールまたはクリーニング液)
を流し込む。
(アルコールまたはクリーニング液)
を流し込む。
間隔シート
オメガユニット
光学フィルタブロックの交換方法
2
層側が
オメガユニット側
マウント
側
側
オメガ
ユニット
側
ユニット
側
光学フィルタブロック
RX1
マウント
側
側
オメガ
ユニット
側
ユニット
側
RX1R