Sony DSC-RX1 / DSC-RX1R (serv.man2) Service Manual ▷ View online
DSC-RX1/RX1R_L2
2-14E
ACCESSORIES
901
902
903
904
905
AC-UD10
AC-UD11
906
907
Ref. No. Part No.
Description
901
1-489-928-41
AC Adaptor AC-UD10 (AEP)
901
1-489-928-51
AC Adaptor AC-UD10 (E: PAL)
901
1-489-928-71
AC Adaptor AC-UD10 (CH)
901
1-490-474-11
AC Adaptor AC-UD11 (J)
901
1-490-474-21
AC Adaptor AC-UD11 (US, CND)
902
1-832-121-51
Power cord (mains lead) (CH)
902
1-837-427-11
Power cord (mains lead) (AEP, E: PAL)
903
1-839-666-11
Micro USB cable (RX1)
903
1-846-615-11
Micro USB cable (RX1R)
904
4-444-328-01
Shoulder strap (RX1)
904
4-466-522-01
Shoulder strap (RX1R)
905
X-2587-067-1 Lens
cap
906
4-438-734-01 Shoe
cap
907
4-443-124-01
Instruction Manual (JAPANESE)(RX1)
907
4-443-124-11
Instruction Manual (ENGLISH)(RX1)
* 907
4-443-124-21
Instruction Manual (SPANISH)(RX1)
* 907
4-443-124-31
Instruction Manual (FRENCH)(RX1)
* 907
4-443-124-41
Instruction Manual (PORTUGUESE)(RX1)
* 907
4-443-124-51
Instruction Manual (GERMAN)(RX1)
* 907
4-443-124-61
Instruction Manual (ITALIAN)(RX1)
* 907
4-443-124-71
Instruction Manual (DUTCH)(RX1)
* 907
4-443-124-81
Instruction Manual (POLISH)(RX1)
907
4-443-124-91
Instruction Manual (SIMPLIFIED CHINESE) (CH)(RX1)
* 907
4-443-125-11
Instruction Manual (TRADITIONAL CHINESE)(RX1)
* 907
4-443-125-21
Instruction Manual (SIMPLIFIED CHINESE) (E: PAL)
(RX1)
* 907
4-443-125-31
Instruction Manual (ARABIC)(RX1)
* 907
4-443-125-41
Instruction Manual (PERSIAN)(RX1)
907
4-443-125-51
Instruction Manual (KOREAN)(RX1)
907
4-469-577-01
Instruction Manual (JAPANESE)(RX1R)
907
4-469-577-11
Instruction Manual (ENGLISH)(RX1R)
Ref. No. Part No.
Description
* 907
4-469-577-21
Instruction Manual (SPANISH)(RX1R)
* 907
4-469-577-31
Instruction Manual (FRENCH)(RX1R)
* 907
4-469-577-41
Instruction Manual (PORTUGUESE)(RX1R)
* 907
4-469-577-51
Instruction Manual (GERMAN)(RX1R)
* 907
4-469-577-61
Instruction Manual (ITALIAN)(RX1R)
* 907
4-469-577-71
Instruction Manual (DUTCH)(RX1R)
* 907
4-469-577-81
Instruction Manual (POLISH)(RX1R)
907
4-469-577-91
Instruction Manual (SIMPLIFIED CHINESE) (CH)
(RX1R)
* 907
4-469-578-11
Instruction Manual (TRADITIONAL CHINESE)(RX1R)
* 907
4-469-578-21
Instruction Manual (SIMPLIFIED CHINESE) (E: PAL)
(RX1R)
* 907
4-469-578-31
Instruction Manual (ARABIC)(RX1R)
* 907
4-469-578-41
Instruction Manual (PERSIAN)(RX1R)
907
4-469-578-51
Instruction Manual (KOREAN)(RX1R)
Note: This unit has no bundled CD-ROM.
Contents included in the CD-ROM will be supplied to customers as
follows.
Contents included in the CD-ROM will be supplied to customers as
follows.
・ User Guide (HTML)
- You can access the URL of the support site described in the
Instruction Manual.
- All of the contents in the User Guide are included in the Instruction
Manual or built-in guide.
・ Application Software
- If a customer requests the CD-ROM, consult with each Head
Quarters.
Ref. No. Part No.
Description
951
(Not supplied) Cleaning Cloth
2-2. SELECTION
PARTS
Ref. No.54
Select the optimum thickness of shim.
Part No.
Description
4-443-059-01 SHIM
(t=0.12±0.005)
4-443-059-11 SHIM
(t=0.14±0.005)
4-443-059-21 SHIM
(t=0.16±0.005)
4-443-059-31 SHIM
(t=0.18±0.005)
4-443-059-41 SHIM
(t=0.20±0.005)
4-443-059-51 SHIM
(t=0.22±0.005)
4-443-059-61 SHIM
(t=0.24±0.005)
4-443-059-71 SHIM
(t=0.26±0.005)
4-443-059-81 SHIM
(t=0.28±0.005)
4-443-059-91 SHIM
(t=0.30±0.005)
4-443-060-01 SHIM
(t=0.32±0.005)
4-443-060-11 SHIM
(t=0.34±0.005)
4-443-060-21 SHIM
(t=0.36±0.005)
4-443-060-31 SHIM
(t=0.38±0.005)
4-443-060-41 SHIM
(t=0.40±0.005)
4-443-060-51 SHIM
(t=0.42±0.005)
4-443-060-61 SHIM
(t=0.44±0.005)
4-443-060-71 SHIM
(t=0.46±0.005)
4-443-060-81 SHIM
(t=0.48±0.005)
4-443-060-91 SHIM
(t=0.50±0.005)
4-443-061-01 SHIM
(t=0.52±0.005)
4-443-061-11 SHIM
(t=0.54±0.005)
4-443-061-21 SHIM
(t=0.56±0.005)
4-443-061-31 SHIM
(t=0.58±0.005)
4-443-061-41 SHIM
(t=0.60±0.005)
This item is supplied with the unit as an accessory, but is not prepared as a service part.
951
951
Ref. No. Part No.
Description
8-022-359-00
Rechargeable battery pack NP-BX1/J (J)
8-022-359-31
Rechargeable battery pack NP-BX1/UC (US, CND)
8-022-359-50
Rechargeable battery pack NP-BX1/CE (AEP, E)
8-022-359-71
Rechargeable battery pack NP-BX1/CN (CH)
DSC-RX1/RX1R_L2
3-1
3. ASSEMBLY
Assembly-1: Notes on Assembling the IM Imager Unit and Lens
Block.
1
2
3
1
2
2
2
2
4
2
3
2
1
3
IM Imager Unit
Seal Frame
Glossy surface
(eyepiece side)
(eyepiece side)
Rear Tube
Screw tightening sequence when
assembling the IM Imager Unit.
assembling the IM Imager Unit.
2
3
3
2
2
4
3
1
Lens
Screw tightening sequence when
assembling the Lens.
assembling the Lens.
Screw tightening sequence when
assembling the Rear Tube.
assembling the Rear Tube.
Install the Seal Frame facing the glossy surface
side to the IM Imager Unit.
side to the IM Imager Unit.
Rear Tube
Number
Number
Data Carry QR Seal
Lens
Lens
Data Carry QR Seal
JK-1002 Flexible Board
When using a new lens, remove the Data Carry QR Seal from
the lens and stick it to the JK-1002 Flexible Board at the location
shown in the figure below.
the lens and stick it to the JK-1002 Flexible Board at the location
shown in the figure below.
When using a new lens, confirm that the number described in the seal
on the lens is equal to the number described in the seal on the Rear
Tube, and then install the lens to the main body.
on the lens is equal to the number described in the seal on the Rear
Tube, and then install the lens to the main body.
Assembly-2: Notes on Assembling the II-2001 Flexible Board.
II Flexible Retainer
II-2001Flexible Board
Boss
Claw
Claws
After the II Flexible Retainer has been installed, confirm that
the II-2001Flexible Board is engaged with the five claws and
the one boss.
the II-2001Flexible Board is engaged with the five claws and
the one boss.
Assembly-3: Notes on Assembling the E Dial and M Dial.
Steel Ball
Apply the certain grease
(0.04g)
(0.04g)
Apply the certain
grease (0.04g)
grease (0.04g)
3
Apply the certain grease that comes with BALL, STEEL ASSY
(SERVICE) (A-1911-422-A) to the Steel Ball.
4
4
Install the E Dial Ball Spring and the Steel Ball Assy, and then
install the E Dial fitting it with the D Cut portion. Then tighten
a screw.
a screw.
1
Apply the certain grease that comes with BALL, STEEL ASSY
(SERVICE) (A-1911-422-A) to the Steel Balls.
2
2
Install the two M Dial Ball Springs and the two Ball Steels,
and then install the M Dial fitting it with the D Cut portion.
Then tighten a screw.
Then tighten a screw.
E Dial Ball Spring
E Dial
D Cut portion
D Cut portion
M Dial Ball
Springs
Springs
M Dial
Steel Balls
D Cut portion
D Cut portion
Assembly-4: Notes on Assembling the Control Switch Block.
Control Switch Block
Lever
Install the Control Switch Block while pulling the Shutter
Button Assy lever and the Control Switch Block lever in the
direction of arrow.
Button Assy lever and the Control Switch Block lever in the
direction of arrow.
Shutter Button Assy
Assembly-5: How to fold the II-2001 Flexible Board.
II-2001
Flexible Board
Flexible Board
Adhesive
Parts
Parts
Valley
fold
fold
Valley
fold
fold
Mountain
fold
fold
Mountain
fold
fold
Adhesive
Part
Part
Fold dotted line parts of the II-2001 Flexible Board
as shown in figure.
as shown in figure.
Valley fold
DSC-RX1/RX1R_L2
3-2E
Assembly-6: Notes on Assembling the FM Dial.
Install the FM Dial Base, align the projection with groove.
Install the FM Ring, as shown in the figure.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
Install the FM Plate to the FM Dial. as shown with in the figure.
FM Dial Base
Projection
Non rib
Projection
Hole
Groove
FM Ring
FM Ring
FM Dial
FM Dial
Base
Base
FM Dial
Dial
FM Plate
Install the FM Plate and FM Dial.
Rotate the FM Dial Base.
Rotate the FM Dial Base.
When you assemble, adjust
the position as below.
the position as below.
Apply the certain grease
(0.001g)
(0.001g)
Apply the certain grease
(0.001g)
(0.001g)
JK-1002 Flexible
Board
Board
Assembly-7: Notes on Assembling the Top Inner.
Top Inner
Apply the certain grease
(0.04g)
(0.04g)
Apply the certain grease that comes with BALL, STEEL ASSY
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
Assembly-8: Notes on Replacing the Optical Filter Block.
Method of Removal
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
the spacer sheet.
*
*
Please wait until the adhesive strength of the spacer sheet gets
weaker.
(2) Detach the spacer sheet from the omega unit.
Method of Attachment
(1) Attach the Optical filter block to the spacer sheet to make the entire area
(1) Attach the Optical filter block to the spacer sheet to make the entire area
of the optical filter block uniform.
*
*
Replace the spacer sheet due to the deformation of
spacer sheet and the decrease in the adhesive strength of the
double-faced adhesive tape.
*
The two-layer side of the optical filter block is on the omega unit side.
(2) Attach the optical filter block and spacer sheet to the omega unit so that
the entire area of the spacer sheet
is uniform.
*
Be very careful to prevent dust and foreign objects from entering
during this work.
Pour the solvent (alcohol or liquid cleaner)
between the omega unit and the spacer sheet.
between the omega unit and the spacer sheet.
Spacer Sheet
Omega Unit
Optical filter block replacing method
The two-layer side is on
the omega unit side.
the omega unit side.
Mount
Side
Side
Omega unit
Side
Side
Mount
Side
Side
Omega unit
Side
Side
Optical Filter Block
RX1
RX1R
取り外し方
(1)
(1)
オメガユニットと間隔シートの間に溶剤(アルコールまたはクリーニン
グ液)を流し込む。
*
*
間隔シートの粘着力が弱くなるのを待ってください。
(2)
オメガユニットから間隔シート,光学フィルタブロックを取り外す。
組み付け方
(1)
(1)
間隔シートに対し,上下左右が均一になるように
光学フィルタブロックを貼り付ける。
*
間隔シートは変形、または両面接着力低下するため、
交換してください。
*
光学フィルタブロックは2層側がイメージャー側に
なります。
(2)
オメガユニットに対し,上下左右が均一になるように
間隔シート,光学フィルタブロックを貼り付ける。
*
ゴミ侵入には十分注意して作業をお願いします。
オメガユニットと間隔シートの間に溶剤
(アルコールまたはクリーニング液)
を流し込む。
(アルコールまたはクリーニング液)
を流し込む。
間隔シート
オメガユニット
光学フィルタブロックの交換方法
2
層側が
オメガユニット側
マウント
側
側
オメガ
ユニット
側
ユニット
側
光学フィルタブロック
RX1
マウント
側
側
オメガ
ユニット
側
ユニット
側
RX1R
DSC-RX1/RX1R_L2
3-2E
Assembly-6: Notes on Assembling the FM Dial.
Install the FM Dial Base, align the projection with groove.
Install the FM Ring, as shown in the figure.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
And apply the certain grease that comes with BALL, STEEL
ASSY (SERVICE) (A-1911-422-A) to the FM Ring.
Install the FM Plate to the FM Dial. as shown with in the figure.
FM Dial Base
Projection
Non rib
Projection
Hole
Groove
FM Ring
FM Ring
FM Dial
FM Dial
Base
Base
FM Dial
Dial
FM Plate
Install the FM Plate and FM Dial.
Rotate the FM Dial Base.
Rotate the FM Dial Base.
When you assemble, adjust
the position as below.
the position as below.
Apply the certain grease
(0.001g)
(0.001g)
Apply the certain grease
(0.001g)
(0.001g)
JK-1002 Flexible
Board
Board
Assembly-7: Notes on Assembling the Top Inner.
Top Inner
Apply the certain grease
(0.04g)
(0.04g)
Apply the certain grease that comes with BALL, STEEL ASSY
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
(SERVICE) (A-1911-422-A) to the rib of the Top Inner.
Assembly-8: Notes on Replacing the Optical Filter Block.
Method of Removal
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
(1) Pour the solvent (alcohol or liquid cleaner) between the omega unit and
the spacer sheet.
*
*
Please wait until the adhesive strength of the spacer sheet gets
weaker.
(2) Detach the spacer sheet from the omega unit.
Method of Attachment
(1) Attach the Optical filter block to the spacer sheet to make the entire area
(1) Attach the Optical filter block to the spacer sheet to make the entire area
of the optical filter block uniform.
*
*
Replace the spacer sheet due to the deformation of
spacer sheet and the decrease in the adhesive strength of the
double-faced adhesive tape.
*
The two-layer side of the optical filter block is on the omega unit side.
(2) Attach the optical filter block and spacer sheet to the omega unit so that
the entire area of the spacer sheet
is uniform.
*
Be very careful to prevent dust and foreign objects from entering
during this work.
Pour the solvent (alcohol or liquid cleaner)
between the omega unit and the spacer sheet.
between the omega unit and the spacer sheet.
Spacer Sheet
Omega Unit
Optical filter block replacing method
The two-layer side is on
the omega unit side.
the omega unit side.
Mount
Side
Side
Omega unit
Side
Side
Mount
Side
Side
Omega unit
Side
Side
Optical Filter Block
RX1
RX1R
取り外し方
(1)
(1)
オメガユニットと間隔シートの間に溶剤(アルコールまたはクリーニン
グ液)を流し込む。
*
*
間隔シートの粘着力が弱くなるのを待ってください。
(2)
オメガユニットから間隔シート,光学フィルタブロックを取り外す。
組み付け方
(1)
(1)
間隔シートに対し,上下左右が均一になるように
光学フィルタブロックを貼り付ける。
*
間隔シートは変形、または両面接着力低下するため、
交換してください。
*
光学フィルタブロックは2層側がイメージャー側に
なります。
(2)
オメガユニットに対し,上下左右が均一になるように
間隔シート,光学フィルタブロックを貼り付ける。
*
ゴミ侵入には十分注意して作業をお願いします。
オメガユニットと間隔シートの間に溶剤
(アルコールまたはクリーニング液)
を流し込む。
(アルコールまたはクリーニング液)
を流し込む。
間隔シート
オメガユニット
光学フィルタブロックの交換方法
2
層側が
オメガユニット側
マウント
側
側
オメガ
ユニット
側
ユニット
側
光学フィルタブロック
RX1
マウント
側
側
オメガ
ユニット
側
ユニット
側
RX1R