Sony DSC-QX100 Service Manual ▷ View online
DSC-QX100
4-10
(3) Linear Guide Tube (B) and Cam Tube Replacing Method
Screw
Zoom Gear Assy
Screw
Z Retainer
Screw
Screw
Flexible board (focus)
Connector
Sensor
Be careful so that the Rear Tube
Mirror Block is not caught.
Mirror Block is not caught.
Rear Tube Mirror Block
3. Remove the screw and the Zoom Gear Assy.
4. Remove the three screws and the Z Retainer.
5. Remove the Sensor.
5. Remove the Sensor.
6. Peel the adhesive tape.
7. Disconnect the flexible board (focus) from the connector.
8. Remove the Rear Tube Mirror Block.
7. Disconnect the flexible board (focus) from the connector.
8. Remove the Rear Tube Mirror Block.
Adhesive tape
Removal
1. Disconnect the LF-2050 Flexible Board from the connector.
2. Disengage the LF-2049 Flexible Board from the hook.
1. Disconnect the LF-2050 Flexible Board from the connector.
2. Disengage the LF-2049 Flexible Board from the hook.
Hook
Connector
LF-2050
Flexible Board
Flexible Board
LF-2049
Flexible Board
Flexible Board
DSC-QX100
4-11
10. Turn the Naruto Gear in the arrow direction to extend the Lens Barrel to the center of TELE and WIDE.
11. Remove the flexible boards from the ribs and the boss and store the flexible boards in the Lens Barrel.
11. Remove the flexible boards from the ribs and the boss and store the flexible boards in the Lens Barrel.
12. Turn the Naruto Gear in the arrow direction to return the lens to the previous position.
13. Remove the Naruto Gear.
14. Detach the Stationary Tube.
13. Remove the Naruto Gear.
14. Detach the Stationary Tube.
9. Disconnect the two flexible boards from the connectors and then remove the LF-2049 Flexible Board.
LF-2049 Flexible Board
Flexible
boards
boards
Stationary Tube
Naruto Gear
Naruto Gear
Boss
Rib
Rib
Rib
Naruto Gear
Hook
Boss
Connectors
Flexible
boards
boards
DSC-QX100
4-12
19. Match the marks of the Cam Tube and the Linear Guide Tube (B).
20. Detach the Linear Guide Tube (B) from the Cam Tube.
20. Detach the Linear Guide Tube (B) from the Cam Tube.
Cam Tube
Cam Tube
Linear Guide Tube (B)
Linear Guide Tube (B)
17. Set the mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
18. Remove the 3 Group Frame Block Assy and the 2 Group Frame Block Assy.
18. Remove the 3 Group Frame Block Assy and the 2 Group Frame Block Assy.
2 Group Frame Block Assy
3 Group Frame Block Assy
Linear Guide Tube (B)
Cam Tube
15. Turn the Cam Tube in the arrow direction to detach the 1 Group Frame Block Assy and Straight Tube (A) Block Assy.
16. Detach the 1 Group Frame Block Assy from the Straight Tube (A) Block Assy.
16. Detach the 1 Group Frame Block Assy from the Straight Tube (A) Block Assy.
1 Group Frame Block Assy,
Straight Tube (A) Block Assy
Straight Tube (A) Block Assy
Straight Tube (A)
Block Assy
Block Assy
1 Group Frame
Block Assy
Block Assy
Cam Tube
Mark
Mark
Mark
DSC-QX100
4-13
Linear Guide Tube (B)
Cam Tube
CAV No.
Linear Guide Tube (B)
Installation
1. While matching the marks of the Linear Guide Tube (B) and the Cam Tube, assemble these parts.
1. While matching the marks of the Linear Guide Tube (B) and the Cam Tube, assemble these parts.
2. Set the mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
3. Install the 2 Group Frame Block Assy at a position where the mark of the Linear Guide Tube (B) matches CAV No. of
the 2 Group Frame Block Assy.
4. Install the 3 Group Frame Block Assy at a position where the mark of the Linear Guide Tube (B) matches the hole of the
3 Group Frame Block Assy.
3. Install the 2 Group Frame Block Assy at a position where the mark of the Linear Guide Tube (B) matches CAV No. of
the 2 Group Frame Block Assy.
4. Install the 3 Group Frame Block Assy at a position where the mark of the Linear Guide Tube (B) matches the hole of the
3 Group Frame Block Assy.
5. Set the mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
6. Match the mark of the Cam Tube with the concave portion of the 1 Group Frame Block Assy.
7. Install the Cam Tube to the 1 Group Frame Block Assy, and turn the Cam Tube.
6. Match the mark of the Cam Tube with the concave portion of the 1 Group Frame Block Assy.
7. Install the Cam Tube to the 1 Group Frame Block Assy, and turn the Cam Tube.
2 Group Frame Block Assy
3 Group Frame Block Assy
1 Group Frame
Block Assy
Block Assy
Cam Tube
Cam Tube
Cam Tube
Linear Guide Tube (B)
Cam Tube
Linear Guide Tube (B)
Mark
Mark
Concave
portion
portion
Mark
Mark
Hole
Click on the first or last page to see other DSC-QX100 service manuals if exist.