Sony DSC-P92 (serv.man2) Service Manual ▷ View online
2-3
DSC-P92
2-2. BLOCK LIGHT GUIDE PLATE, LCD MODULE (ACX309AKB-2),
CONTROL SWITCH BLOCK (SW-391), LITHIUM BATTERY
Danger of explosion if batteryis incorrectly replaced.
Replace only with the same or equivalent type.
Replace only with the same or equivalent type.
5
Control switch block (SW-391)
Control switch block (SW-391)
When installing it,
align the switch position
as shown.
align the switch position
as shown.
1
Four tapping screws
(M1.7
×
4)
2
Two tapping screws
(M1.7
×
4)
4
LCD module
(ACX309AKB-2) (24P)
3
Block light guide plate
(6P)
Caution
6
Remove soldering
from the two points.
7
Lithium battery
Lithium battery
Caution
2-4
DSC-P92
2-4. UNIT PARTS (UA-002)
2-3. MAIN BLOCK ASSEMBLY
3
Main block assembly
2
Two claws
1
Unit parts (UA-002)
(10P)
Shorting jig
(1k
(1k
Ω
/ 1w)
The power supply capacitor of the Flash unit is
charged to the voltage as high as 300 V at a
maximum. The high voltage is not discharged
even after the main power of the machine is
simply turned off and the charged potential still
remains.
Discharge the residual voltage by referring to
Service Note (page 1-1).
charged to the voltage as high as 300 V at a
maximum. The high voltage is not discharged
even after the main power of the machine is
simply turned off and the charged potential still
remains.
Discharge the residual voltage by referring to
Service Note (page 1-1).
Caution
Capacitor
ST-82 board
Flash unit
1
Tapping screws, p2
(1.7
×
5)
3
Unit parts (UA-002)
2
Two cl
aws
2-5
DSC-P92
2-5. ZOOM LENS (CE01B), CCD BLOCK ASSEMBLY
2
Zoom lens (CE01B) (27P)
7
Optical filter block
6
Light interception plate
8
Seal rubber (K)
1
Tape (Y)
Attach the Tape (Y) as shown in the illustration.
Caution
9
Remove the solderings.
q;
CCD block assembly
3
Two tapping screw, p2
(1.7
×
5)
5
Three screws
(1.7
×
4)
4
Plate cooling CCD
Tape (Y)
2-6
DSC-P92
2-7. CONTROL SWITCH BLOCK (RL-059), ST-82 BOARD
2-6. MEMORY STICK CONNECTOR, JK BLOCK (JK-252)
1
Tapping screw
(1.7
×
4)
5
Tapping screw, p2
(1.7
×
5)
4
Memory stick connector
2
Claw
7
JK BLOCK (JK-252) (39P)
8
JK BLOCK (JK-252)
3
JK BLOCK (JK-252) (10P)
6
Tape (Y)
Tape (Y)
SY-93 board
Attach the Tape (Y) as shown in the illustration.
Caution
2
Control switch block (RL-059)(10P)
3
Control switch block (RL-059)
5
FP-643 flexible board
(12P)
1
Two claws
4
Two claws
6
ST-82 board
Click on the first or last page to see other DSC-P92 (serv.man2) service manuals if exist.