Sony DSC-P9 (serv.man3) Service Manual ▷ View online
13
G
e
tt
in
g st
ar
te
d
Using an external power source
,
Open the jack cover, and
connect the AC-LS1A AC
power adaptor (supplied) to the
DC IN jack of the camera.
connect the AC-LS1A AC
power adaptor (supplied) to the
DC IN jack of the camera.
Connect the plug with the v mark facing
up.
up.
•
Connect the AC power adaptor to an easily
accessible wall outlet (wall socket) close by. If
something goes wrong while you are using the
adaptor, immediately shut off the power by
pulling the plug out of the wall outlet.
accessible wall outlet (wall socket) close by. If
something goes wrong while you are using the
adaptor, immediately shut off the power by
pulling the plug out of the wall outlet.
1
Jack cover
AC power adaptor
DC plug
,
Connect the power cord (mains
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
•
When you have finished using the AC power
adaptor, disconnect it from the DC IN jack of
the camera.
adaptor, disconnect it from the DC IN jack of
the camera.
•
The set is not disconnected from the AC power
source as long as it is connected to the wall
outlet (wall socket) even if the set itself has
been turned off.
source as long as it is connected to the wall
outlet (wall socket) even if the set itself has
been turned off.
2
2
To a wall outlet
(wall socket)
Power cord
(mains lead)
(mains lead)
1
Using your camera
abroad
abroad
Power sources
You can use your camera in any country or
area with the supplied AC power adaptor
within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
area with the supplied AC power adaptor
within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
[a]
, if necessary, depending on the design of
the wall outlet (wall socket)
[b]
.
•
Do not use an electrical transformer. Using this
may cause a malfunction.
may cause a malfunction.
AC-LS1A
14
Turning on/off your camera
,
Press POWER.
The POWER lamp lights in green, the
power is on. When you turn on your camera
for the first time, the CLOCK SET screen
appears (see the next page).
power is on. When you turn on your camera
for the first time, the CLOCK SET screen
appears (see the next page).
To turn off the power
Press POWER again, the POWER lamp
goes out, and the camera turns off.
goes out, and the camera turns off.
•
If you turn the power on when the mode dial is
set to SCN,
set to SCN,
, or
the lens comes out.
Please be careful not to touch the lens.
1
POWER
ON/OFF(CHG)
POWER
POWER lamp
The Auto Power Off
function
function
If no tasks are performed for a while*
when shooting, viewing images, or
setting up the camera while using the
battery, power is automatically shut off
to preserve battery power.
However, in the following
circumstances, even if the battery is
being used to power the camera, the
Auto Power Off function will not work.
• Movies are being played back
• A slide show is being shown
• A cable is connected to the USB jack
when shooting, viewing images, or
setting up the camera while using the
battery, power is automatically shut off
to preserve battery power.
However, in the following
circumstances, even if the battery is
being used to power the camera, the
Auto Power Off function will not work.
• Movies are being played back
• A slide show is being shown
• A cable is connected to the USB jack
or the A/V OUT (MONO) jack
*
When [POWER SAVE] is set to [ON]:
approximately 90 seconds
When [POWER SAVE] is set to [OFF]:
approximately 3 minutes
approximately 90 seconds
When [POWER SAVE] is set to [OFF]:
approximately 3 minutes
How to use the
control button
control button
To change the current settings of the
camera, bring up the menu or the SET UP
screen (page 50), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired value, then press the center z or
b/B to make the setting.
camera, bring up the menu or the SET UP
screen (page 50), and use the control button
to make the changes.
For each item, press v/V/b/B to select the
desired value, then press the center z or
b/B to make the setting.
WHITE BAL
AUTO
ISO
WB
EV
ISO
0EV
0EV
15
G
e
tt
in
g st
ar
te
d
Setting the date and time
,
Set the mode dial to
.
•
You can also carry out this operation when the
mode dial is set to SCN,
mode dial is set to SCN,
, or
.
•
To change values for the time and the date that
have been previously set, set the mode dial to
SET UP, select [CLOCK SET] in [SETUP 1]
(page 92), then proceed from Step 3.
have been previously set, set the mode dial to
SET UP, select [CLOCK SET] in [SETUP 1]
(page 92), then proceed from Step 3.
,
Press POWER.
The POWER lamp lights in green and the
CLOCK SET screen appears.
CLOCK SET screen appears.
,
Select the desired order for the
date, the month and the year
using
date, the month and the year
using
v
/
V
on the control
button, then press the center
z
.
You can select from [Y/M/D] (year/month/
day), [M/D/Y], and [D/M/Y].
day), [M/D/Y], and [D/M/Y].
•
If the rechargeable button battery, which
provides the power for saving the time data,
ever loses its charge (page 94), the CLOCK
SET screen automatically reappears. If this
happens, reset the date and time by following
the above procedure, starting from Step 3.
provides the power for saving the time data,
ever loses its charge (page 94), the CLOCK
SET screen automatically reappears. If this
happens, reset the date and time by following
the above procedure, starting from Step 3.
1
Mode dial
D/M/Y
O K
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
1
12
00
AM
OK
POWER
ON/OFF(CHG)
2
POWER
3
D/M/Y
O K
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
1
12
00
AM
OK
16
Setting the date and time (continued)
,
Select the year, month, day,
hour, or minute item you want
to set using
hour, or minute item you want
to set using
b
/
B
.
A v will be shown above, and a V will be
shown below the item currently selected to
be set.
shown below the item currently selected to
be set.
,
Set the desired numerical
value using
value using
v
/
V
on the control
button, then press the center
z
.
After setting the current numerical value,
set the next item. Repeat the above process
until all of the items have been set.
set the next item. Repeat the above process
until all of the items have been set.
•
If you select [D/M/Y] in Step 3, use the 24-
hour clock display.
hour clock display.
,
Select [OK] using the
B
on the
control button, then press the
center
center
z
.
After the date and time are set, the clock
will start to keep time.
will start to keep time.
•
To cancel the setting process, select
[CANCEL], then press the center z.
[CANCEL], then press the center z.
4
D/M/Y
O K
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
1
12
00
AM
OK
5
D/M/Y
O K
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 1
7
12
00
AM
OK
D/M/Y
O K
CANCEL
M/D/Y
Y/M/D
CLOCK SET
2002 /
:
/ 4
7
10
30
PM
OK
6
Click on the first or last page to see other DSC-P9 (serv.man3) service manuals if exist.