DOWNLOAD Sony DSC-P52 Service Manual ↓ Size: 1.78 MB | Pages: 28 in PDF or view online for FREE

Model
DSC-P52
Pages
28
Size
1.78 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 3
File
dsc-p52.pdf
Date

Sony DSC-P52 Service Manual ▷ View online

SERVICE MANUAL
LEVEL
 
3
Revision History
Revision History
Ver 1.1  2005. 09
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987624841.pdf).
• Reference No. search on printed wiring boards is available.
Link
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
Link
DIGITAL STILL CAMERA
DSC-P52
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Korea Model
Chinese Model
Tourist Model
Brazilian Model
The information that is not described in this Service Manual is described
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
Contents of LEVEL 2 Service Manual
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. REPAIR PARTS LIST
6. ADJUSTMENTS
OVERALL
POWER
ST-82, FP-643 FLEXIBLE, JK-256,
CONTROL SWITCH BLOCK (SW-
392), RL-060, UA-003
EXPLODED VIEWS
ELECTRICAL PARTS LIST
— 2 —
DSC-P52
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
COVER
COVER
— 3 —
DSC-P52
TABLE OF CONTENTS
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-2.
SCHEMATIC DIAGRAMS
• SY-91 (1/10)(CCD IMAGER, CAMERA A/D CONV.)
SCHEMATIC DIAGRAM ······························ 4-7
• SY-91 (2/10)(LENS DRIVE)
SCHEMATIC DIAGRAM ······························ 4-9
• SY-91 (3/10)(CAMERA DSP, VIDEO AMP)
SCHEMATIC DIAGRAM ···························· 4-11
• SY-91 (4/10)(SH DSP, CLK GEN)
SCHEMATIC DIAGRAM ···························· 4-13
• SY-91 (5/10)(LCD DRIVE, TIMING GENERATOR)
SCHEMATIC DIAGRAM ···························· 4-15
• SY-91 (6/10)(FRONT CONTROL)
SCHEMATIC DIAGRAM ···························· 4-17
• SY-91 (7/10)(AUDIO I/O)
SCHEMATIC DIAGRAM ···························· 4-19
• SY-91 (8/10)(DC IN)
SCHEMATIC DIAGRAM ···························· 4-21
• SY-91 (9/10)(DC-DC CONVERTER)
SCHEMATIC DIAGRAM ···························· 4-23
• SY-91 (10/10)(CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-25
4-3.
PRINTED WIRING BOARDS
• SY-91 (CCD IMAGER CAMERA A/D CONV.,
LENS DRIVE, CAMERA DSP, VIDEO AMP, SH DSP,
CLK GEN, LCD DRIVE TIMING GENERATOR,
FRONT CONTROL, AUDIO I/O, DC IN, DC-DC
CONVERTER, CONNECTOR)
PRINTED WIRING BOARD ······················· 4-39
4-4.
WAVEFORMS ······························································ 4-45
4-5.
MOUNTED PARTS LOCATION ································· 4-48
5.
REPAIR PARTS LIST
5-2.
ELECTRICAL PARTS LIST ·········································· 5-7
DSC-P52
COVER
COVER
Link
Link
4-2.  SCHEMATIC DIAGRAMS
SY-91 BOARD (6/10) 
(FRONT CONTROL)
SY-91 BOARD (5/10) 
(LCD DRIVE, TIMING GENERATOR)
SY-91 BOARD (10/10) 
(CONNECTOR)
SY-91 BOARD (4/10) 
(SH DSP, CLK GEN)
SY-91 BOARD (9/10) 
(DC-DC CONVERTER)
SY-91 BOARD (3/10) 
(CAMERA DSP, VIDEO AMP)
SY-91 BOARD (8/10) 
(DC IN)
SY-91 BOARD (2/10) 
(LENS DRIVE)
SY-91 BOARD (7/10) 
(AUDIO I/O)
SY-91 BOARD (1/10) 
(CCD IMAGER, CAMERA A/D CONV.)
SY-91 BOARD (6/10) 
(FRONT CONTROL)
SY-91 BOARD (5/10) 
(LCD DRIVE, TIMING GENERATOR)
SY-91 BOARD (10/10) 
(CONNECTOR)
SY-91 BOARD (4/10) 
(SH DSP, CLK GEN)
SY-91 BOARD (9/10) 
(DC-DC CONVERTER)
SY-91 BOARD (3/10) 
(CAMERA DSP, VIDEO AMP)
SY-91 BOARD (8/10) 
(DC IN)
SY-91 BOARD (2/10) 
(LENS DRIVE)
SY-91 BOARD (7/10) 
(AUDIO I/O)
SY-91 BOARD (1/10) 
(CCD IMAGER, CAMERA A/D CONV.)
WAVEFORMS
COMMON NOTE FOR SCHEMATIC DIAGRAMS
WAVEFORMS
COMMON NOTE FOR SCHEMATIC DIAGRAMS
Page of 28
Display

Sony DSC-P52 Service Manual ▷ Download

  • DOWNLOAD Sony DSC-P52 Service Manual ↓ Size: 1.78 MB | Pages: 28 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DSC-P52 in PDF for free, which will help you to disassemble, recover, fix and repair Sony DSC-P52 Digital Camera. Information contained in Sony DSC-P52 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.