DOWNLOAD Sony DSC-P51 Service Manual ↓ Size: 488.37 KB | Pages: 18 in PDF or view online for FREE

• For INSTRUCTION MANUAL, refer to separate file (992997071.pdf).

AEP Model

UK Model

— 2 —

Image device 6.64 mm(1/2.7 type) color

CCD
Primary color filter

Total pixels number of camera

Approx. 2 100 000 pixels

Lens

2

× zoom lens

f=6.3 to 12.6 mm (35 mm camera

 

conversion: 41to 82 mm), F3.8

Effective pixels number of camera

Approx. 1 980 000 pixels

Exposure control

Automatic, 
Scene Selection (3 mode)

White balanceAutomatic, Daylight, Cloudy, 

Fluorescent, Incandescent

Data formats Moving images: MPEG1

Still images: JPEG, GIF (for Clip 
Motion)

Recording media

“Memory Stick”

Flash

Recommended distance
0 .4  to  2.8  m  (1.3 to 9.2 ft) (W/T)

VIDEO OUT jack

Minijack
1 Vp-p, 75 ohm, unbalanced, sync 
negative

USB jack

mini-B 

LCD panel used

4.0 cm (1.6 type) TFT drive

Total number of dots

61 600 (280

×220) dots

Power 

AA nickel hydride batteries (2)
2.4 V
AC-LS1 AC power adaptor
(not supplied), 4.2 V

Power consumption (when recording)

1.7W

Operating temperature range

0

° to 

+

40

°C (

+

32

° to 

+

104

°F)

Storage temperature range

−

20

° to 

+

60

°C (

−

4

° to 

+

140

°F)

Dimensions

126.9 

× 58 × 47 mm (5 × 2 

3

/

8

×

1

7

/

8

 inches)

Mass

275 g (10 oz) (camera, two batteries, 
“Memory Stick” and wrist strap 
included)

Power requirements

AC 100 to 240V 50/60Hz
2.2 W

Output voltage

DC 1.8V 180/110 mA 

× 2

Dimensions

70 

× 29 × 74 mm (2 

7

/

8

× 1 

3

/

16

× 3 

inches) (W/H/D)

Mass

Approx. 70g (2 oz)

Operating temperature range

0

° to + 40°C (32° to +104°F)

• Video connector cable (1)

• R6  (size AA) Ni-MH batteries (2)

• Ni-MH  Battery charger (1)

• Power  cord (mains lead) (1)

• USB  cable (1)

• Wrist strap

• “Memory Stick” (16MB) (1)

• CD-ROM  (USB driver: SPVD-008) (1)

• Operating Instructions (1)

Design and specifications are subject to change

 

without notice.

(W/H/D, protruding portions not 
included)

(when ISO sensitivity is set to Auto)

— 3 —

1. Check the area of your repair for unsoldered or poorly-soldered

connections.  Check the entire board surface for solder splashes
and bridges.

2. Check the interboard wiring to ensure that no wires are

“pinched” or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transistors,

that were installed during a previous repair.  Point them out to
the customer and recommend their replacement.

4. Look for parts which, though functioning, show obvious signs

of deterioration.  Point them out to the customer and recommend
their replacement.

After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.

0

0

5. Check the B+ voltage to see it is at the values specified.

6. Flexible Circuit Board Repairing

•

Keep the temperature of the soldering iron around 270 ˚C
during repairing.

•

Do not touch the soldering iron on the same conductor of
the circuit board (within 3 times).

•

Be careful not to apply force on the conductor when sol-
dering or unsoldering.

— 4 —

····································································· 5

Self-diagnosis Display ·································································· 6

1.

Ornamental Parts ································································ 7

2-1.

Cabinet (Rear) Block Assembly ········································· 9

2-2.

PK-062 Board ····································································· 9

2-3.

LCD Module ····································································· 10

2-4.

CD-391 Board ·································································· 10

2-5.

Cabinet (Front) Block Assembly ······································ 11

2-6.

Cabinet (Upper) Block Assembly ····································· 11

2-7.

ST-068 Board ···································································· 12

2-8.

Memory Stick Connector ················································· 12

2-9.

Lens Block Assembly ······················································· 13

2-10. Optical Finder (B148B), Video Lens (B147A) ················ 13
2-11. JK-223 Board ··································································· 14
2-12. CH-109 Board, SY-075 Board ·········································· 14

3-1.

Exploded Views ································································ 15

3-1-1. Cabinet (Front) Section ···················································· 15
3-1-2. Cabinet (Rear) Assembly ·················································· 16
3-1-3. Lens Block Assembly ······················································· 17

Section

Title

Page

Section

Title

Page