DSC-P30, DSC-P50 (serv.man2) — Sony Digital Camera Service Manual (repair manual)

Model
DSC-P30 DSC-P50 (serv.man2)
Pages
101
Size
5.85 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-p30-dsc-p50-sm2.pdf
Date

View Sony DSC-P30 / DSC-P50 (serv.man2) Service Manual online

SERVICE MANUAL
DIGITAL STILL CAMERA
DSC-P30/P50
Level 2
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
DSC-P30/P50
Argentina Model
Brazilian Model
DSC-P50
SPECIFICATIONS
This service manual contains information for Japanese model as well.
On the SY-66 board
This service manual procides the information that is premised the
circuit board replacement service and not intended repair inside the
SY-66 board.
Therefore, schematic diagram, printed wiring board and electrical
parts list of the SY-66 board are not shown.
The following pages are not shown.
SY-66 board
Schematic diagram ................................... Pages 4-11 to 4-26
Printed wiring board ................................... Pages 4-7 to 4-10
Electrical parts list ...................................... Pages 6-9 to 6-14
The above-described information is shown in service manual
Level 3.
Photo: DSC-P50
Ver 1.0  2001. 04
System 
Image device 
6.64 mm (1/2.7 type) color 
CCD 
Lens 
3
×
 zoom lens 
f = 6.4 – 19.2 mm (9/32 – 
25/32 inches)
(41 – 123 mm (1 5/8 – 4 7/8 
inches) when converted into a 
35 mm still camera) 
F = 3.8 – 3.9
Exposure control 
Automatic exposure
White balance 
Automatic, Indoor, Outdoor, 
Hold
Data system 
Movie: MPEG1 
Still: JPEG, GIF (in TEXT 
mode, Clip Motion), TIFF 
Recording medium
“Memory Stick”
Flash 
Recommended recording 
distance (ISO is set to AUTO): 
0.3 m  to  2.0 m 
(11 13/16 inches to 
6 feet 6 3/4 inches)
Output connector 
VIDEO OUT
Minijack 
Video: 1 Vp-p, 75
 
unbalanced, sync negative 
USB jack
mini-B
LCD screen 
Used LCD panel 
1.5 type TFT (Thin Film 
Transistor active matrix) drive 
Total number of dots 
123 200 (560
×
220) dots
General 
Used battery
Two size AA alkaline 
batteries: 3 V
NP-FS11: 3.6 V (not supplied)
Power consumption 
(during recording)
2.8 W
Operation temperature 
0ºC  to 40ºC  
(32ºF to 104ºF ) 
Storage temperature 
–20º C to +60ºC  
(–4ºF to +140ºF ) 
Maximum dimensions 
126
×
61.2
×
53.7 mm 
(5
×
2 1/2
×
2 1/8 inches) 
(w/h/d) 
Mass 
Approx. 260 g (9.2 oz) 
(including two size AA 
batteries, “Memory Stick,” 
wrist strap and lens cap etc.) 
AC-LS1A AC power 
adaptor (not supplied)
Power requirements 
100 to 240 V AC, 50/60 Hz 
Rated output voltage
DC 4.2 V, 1.5 A in operating 
mode
Operation temperature 
0ºC  to 40ºC  (32º F to 104ºF)  
Storage temperature 
–20º C to +60ºC
(–4ºF to +140ºF  ) 
Maximum dimensions 
105
×
36
×
56 mm 
(4 1/4
×
1 7/16
×
2 1/4 inches) 
(w/h/d) (excluding maximum 
protrusions)
Mass 
Approx. 180 g (6 oz) 
NP-FS11 battery pack 
(not supplied)
Used battery 
Lithium ion battery 
Maximum voltage 
DC 4.2 V 
Nominal voltage 
DC 3.6 V 
Capacity 
4.1 Wh (1 140 mAh)
Accessories 
VIDEO connecting cable (1)
Size AA alkaline batteries (2)
USB cable (1)
Lens cap (1)
Lens cap strap (1)
Wrist strap (1)
“Memory Stick” (4 MB) (1)
CD-ROM (2)
Operating Instructions (1)
Design and specifications are 
subject to change without 
notice.
– 2 –
Table for differences of function
Model
DSC-P30
DSC-P50
CCD Imager
1.3M pixels
2.1M pixels
1. Check the area of your repair for unsoldered or poorly-sol-
dered connections.  Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transis-
tors, that were installed during a previous repair.  Point them
out to the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs
of deterioration.  Point them out to the customer and recom-
mend their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270 ˚C
during repairing.
Do not touch the soldering iron on the same conductor of
the circuit board (within 3 times).
Be careful not to apply force on the conductor when sol-
dering or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
ATTENTION  AU  COMPOSANT  AYANT  RAPPORT
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  
0
SUR  LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE
DES  PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ
DE  FONCTIONNEMENT.  NE  REMPLACER  CES  COM-
POSANTS  QUE  PAR  DES  PIÈCES  SONY  DONT  LES
NUMÉROS  SONT  DONNÉS  DANS  CE  MANUEL  OU
DANS  LES  SUPPLÉMENTS  PUBLIÉS  PAR  SONY.
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
0
  OR  DOTTED
LINE  WITH  MARK  
0
  ON  THE  SCHEMATIC  DIAGRAMS
AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 ˚C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C .
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur
such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
– 3 –
SERVICE NOTE
................................................................... 5
Self-diagnosis Display .......................................................... 6
1.
GENERAL
Introduction .............................................................................. 1-2
Identifying the Parts ................................................................. 1-2
Preparing the Power Supply .................................................... 1-2
Setting the Date and Time ....................................................... 1-4
Inserting the “Memory Stick” ................................................... 1-4
Basic Operations ..................................................................... 1-4
Recording Still Images ............................................................ 1-5
Recording Moving Images ....................................................... 1-6
Playing Back Still Images ........................................................ 1-7
Playing Back Moving Images .................................................. 1-7
Viewing Images Using a Personal Computer ......................... 1-7
Image File Storage Destinations and Image Files .................. 1-9
Before Performing Advanced Operations ............................... 1-10
Various Recording ................................................................... 1-12
Various Playback ..................................................................... 1-14
Editing ..................................................................................... 1-15
Additional Information .............................................................. 1-18
Troubleshooting ....................................................................... 1-19
Warning and Notice Messages ............................................... 1-20
Self-diagnosis Display ............................................................. 1-21
LCD Screen Indicators ............................................................ 1-21
2.
DISASSEMBLY
2-1.
Cabinet (R) Assembly ................................................... 2-1
2-2.
Cabinet (Front) Block Assembly .................................... 2-1
2-3.
DD-158 Board ............................................................... 2-2
2-4.
Chassis (Main) Assembly .............................................. 2-3
2-5.
Lens Block Assembly .................................................... 2-3
2-6.
Optical Finder ................................................................ 2-3
2-7.
Zoom Lens ..................................................................... 2-3
2-8.
JK-206 Board ................................................................ 2-4
2-9.
DC Jack ......................................................................... 2-4
2-10. SY-66 Board .................................................................. 2-4
2-11. LCD Module ................................................................... 2-4
2-12. Circuit Boards Location ................................................. 2-6
2-13. Flexible Boards Location ............................................... 2-6
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram .................................................. 3-1
3-8.
Power Block Diagram 1 ................................................. 3-15
3-9.
Power Block Diagram 2 ................................................. 3-17
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagrams ......................................... 4-3
Frame Schematic Diagram ........................................... 4-3
4-2.
Printed Wiring Boards and Schematic Diagrams ......... 4-5
CD-319 Printed Wiring Board and
Schematic Diagram ....................................................... 4-5
JK-206 Printed Wiring Board ........................................ 4-27
JK-206 Schematic Diagram .......................................... 4-29
DD-158 Printed Wiring Board ....................................... 4-31
DD-158 (DC IN) Schematic Diagram ............................ 4-35
DD-158 (DC/DC CONVERTER) Schematic Diagram .. 4-37
DD-158 (FLASH CHARGE) Schematic Diagram ......... 4-39
4-3.
Waveforms .................................................................... 4-41
4-4.
Parts Location ............................................................... 4-44
TABLE OF CONTENTS
Section
Title
Page
Section
Title
Page
5.
ADJUSTMENTS
Before Starting Adjustment ..................................................... 5-1
1-1.
Adjusting Items when Replacing
Main Parts and Boards .................................................. 5-2
5-1.
Camera Section Adjustment ......................................... 5-3
1-1.
Preparations Before Adjustment ................................... 5-3
1-1-1. List of Service Tools ................................................. 5-3
1-1-2. Preparations ............................................................. 5-4
1-1-3. Discharging of the Flashlight Power Supply ............ 5-4
1-1-4. Precautions .............................................................. 5-6
1. Setting the Switch .................................................... 5-6
2. Order of Adjustments ............................................... 5-6
3. Subjects .................................................................... 5-6
4. Preparing the Flash Adjustment Box ....................... 5-7
1-2.
Initialization of B, D, E, F, 7, 9 Page Data .................... 5-8
1-2-1. Initialization of D Page Data .................................... 5-8
1. Initializing D Page Data ............................................ 5-8
2. Modification of D Page Data .................................... 5-8
3. D Page Table ............................................................ 5-8
1-2-2. Initialization of B, E, F, 7, 9 Page Data .................... 5-9
1. Initializing B, E, F, 7, 9 Page Data ........................... 5-9
2. Modification of B, E, F, 7, 9 Page Data .................... 5-9
3. B Page Table ............................................................ 5-9
4. E Page Table ............................................................ 5-9
5. F Page Table ............................................................ 5-10
6. 7 Page Table ............................................................ 5-12
7. 9 Page Table ............................................................ 5-12
1-3.
Video System Adjustments ........................................... 5-13
1.
Video Sync Level Adjustment ....................................... 5-13
2.
Video Burst Level Adjustment ....................................... 5-13
1-4.
Camera System Adjustment ......................................... 5-14
1.
HALL Adjustment ........................................................... 5-15
2.
Flange Back Adjustment (Using the Minipattern Box) .. 5-16
3.
Flange Back Adjustment (Using the Flange Back
Adjustment Chart Subject More than 500 m Away) ..... 5-17
4.
Flange Back Check ....................................................... 5-18
5.
Picture Frame Setting ................................................... 5-19
6.
F No. Standard Data Input ............................................ 5-20
7.
Mechanical Shutter Adjustment .................................... 5-20
8.
Light Level Adjustment .................................................. 5-21
9.
Mixed Color Cancel Adjustment .................................... 5-21
10. Auto White Balance Standard Data Input ..................... 5-22
11. Auto White Balance Adjustment ................................... 5-23
12. Color Reproduction Adjustment .................................... 5-24
13. Color Reproduction Check ............................................ 5-25
14. Auto White Balance Check ............................................ 5-26
15. CCD White Defect Compensation ................................ 5-27
16. CCD Black Defect Compensation ................................. 5-28
17. Strobe White Balance Adjustment ................................ 5-29
1-5.
LCD System Adjustments ............................................. 5-30
1.
LCD Initial Data Input (1) .............................................. 5-31
2.
LCD Initial Data Input (2) .............................................. 5-31
3.
VCO Adjustment (SY-66 Board) .................................... 5-32
4.
Black Limit Adjustment (SY-66 Board) .......................... 5-33
5.
Bright Adjustment (SY-66 Board) .................................. 5-34
6.
Contrast Adjustment (SY-66 Board) .............................. 5-35
7.
Color Adjustment (SY-66 Board) ................................... 5-35
8.
VG Center Adjustment (SY-66 Board) .......................... 5-36
9.
V-COM Adjustment (SY-66 Board) ................................ 5-36
10. White Balance Adjustment (SY-66 Board) .................... 5-37
5-2.
Service Mode ................................................................ 5-38
2-1.
Adjusting Remote Commander ..................................... 5-38
1.
Used the Adjusting Remote Commander ..................... 5-38
2.
Precautions upon Using
the Adjusting Remote Commander ............................... 5-38
2-2.
Data Process ................................................................. 5-39
2-3.
Service Mode ................................................................ 5-40
1.
Setting the Test Mode .................................................... 5-40
2.
Bit Value Discrimination ................................................ 5-40
3.
Mode Dial Check (1) ..................................................... 5-40
4.
Mode Dial Check (2) ..................................................... 5-40
5.
Switch Check (1) ........................................................... 5-40
6.
Switch Check (2) ........................................................... 5-41
– 4 –
Section
Title
Page
7.
LED Check .................................................................... 5-41
8.
Self Diagnosis Code ...................................................... 5-41
6.
REPAIR  PARTS  LIST
6-1.
Exploded Views ............................................................. 6-1
6-1-1. Cabinet (Front) Block Assembly .............................. 6-1
6-1-2. Main Chassis Assembly ........................................... 6-2
6-1-3. Lens Block Assembly ............................................... 6-3
6-1-4. Cabinet (Rear) Block Assembly ............................... 6-4
6-2.
Electrical Parts List ....................................................... 6-5
*
 The color reproduction frame is shown on page 117.
Page of 101

Download Sony DSC-P30 / DSC-P50 (serv.man2) Service Manual (Repair Manual)

Here you can view online or download Sony DSC-P30 / DSC-P50 (serv.man2) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sony DSC-P30 / DSC-P50 (serv.man2) Digital Camera. Information contained in Sony DSC-P30 / DSC-P50 (serv.man2) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).