DOWNLOAD Sony DSC-P150 (serv.man8) Service Manual ↓ Size: 684.57 KB | Pages: 6 in PDF or view online for FREE

Model
DSC-P150 (serv.man8)
Pages
6
Size
684.57 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / SUPPLEMENT -2 LEVEL 2
File
dsc-p150-sm8.pdf
Date

Sony DSC-P150 (serv.man8) Service Manual ▷ View online

SERVICE MANUAL
DSC-P150
LEVEL
 
2
Ver. 1.2  2007.08
Sony EMCS Co.
9-876-755-85
2007H0500-1
© 2007.8
Published by Kohda TEC
SUPPLEMENT-2
File this supplement with the service manual.
(DI07-083)
• Addition of “2-5. ZOOM MOTOR UNIT REPLACEMENT
AND INSPECTION PROCEDURES”
• Change of Repair Parts
DSC-P150
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Brazilian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
— 2 —
DSC-P150
2-5. ZOOM  MOTOR  UNIT  REPLACEMENT  AND  INSPECTION  PROCEDURES
Service parts
Part Number
Part Name
Quantity
1
2-655-042-01
MOTOR UINT, ZOOM
1
Tools used
Adhesive (Super X) (Note 1)
Note 1: Use adhesive (Super X) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
Note 2: These parts are not prepared as service parts.
Recycle removed screws.
2-5-1. REMOVAL  OF  ZOOM  MOTOR  UNIT  FROM  MAIN  SET
1
Remove two screws that secure the zoom motor unit.
* Removed screws are recycled. Do not lose it.
2
Peel off the protection tape affixed to the zoom motor.
* Take care not to damage the flexible board.
3
Insert tweezers from the side to which nothing is affixed, and remove the sensor from the gearbox (2 places).
* Inserting the tweezers at a burst could crack the solder or damage the sensor.
4
Unsolder the zoom motor.
2. DISASSEMBLY
1
not supplied (Note 2)
Zoom Motor Unit
Two Screws
Protection Tape
Zoom Motor Unit
Zoom Motor
Flexible Board
Solder
Tweezers
Gearbox
Sensor
Side which affix nothing
Sensor
— 3 —
DSC-P150
2-5-2. CHECK  BY  HAND  FEELING
1
Rotate the rotary ring clockwise to make the lens-barrel protruded a little until the burrier is opened.
2
Rotating the lens-barrel (larger diameter), reciprocate the lens-barrel 4 to 5 times over full stroke between TELE end and WIDE end to
check for smooth movements free from local heavy load such as a sticking.
3
Repeating the same operation, check the gears at the root of lens-barrel for damaged tooth, chipping, or contamination in overall
periphery and overall length.
4
If no abnormality is found, proceed to the next step.
* If any abnormality is found, it will not be corrected by the zoom motor unit replacement or repair, and thus go to the lens unit
replacement or repair.
2-5-3. INSTALL  NEW  ZOOM  MOTOR
1
Solder new zoom motor unit to the flexible board, and engage and bond the sensor to the gear case.
As an adhesive, use the “Super X” or equivalents.
2
Affix the protection tape to the motor full periphery where the tape was peeled off in step 2.
* Affix the tape firmly as the tape, if peeled, will enter the gears.
* If the tape affixing capability is not strong and it cannot be reused, cut the “SHEET” part number: 2-580-751-01 to 20mm 
× 7mm and
use it.
Rotary Ring
Gear
Lens-barrel (larger diameter)
Burrier
[Bonding range, quantity]
Minimum
Adequate
Super X
Maximum
Protection Tape
Zoom Motor Unit
Zoom Motor Unit
— 4 —
DSC-P150
3
Meshing the gears, meet the mounting boss.
4
Secure the zoom motor unit with the screws.
2-5-4. FINAL  INSPECTION (NO  FAULT  IN  ACTUAL  MOTION/ACTUAL  SCREEN)
1
Zoom motion (Check five postures: horizontal, upward/downward, upper/lower oblique 45º)
No abnormal sound or motion must be found over full stroke between TELE end and WIDE end.
2
Zoom image
No abnormality such as a skipped image or wavy image must be found in the image through LCD or finder over full stroke between
TELE end and WIDE end.
3
Barrier (Check five postures: horizontal, upward/downward, upper/lower oblique 45º)
The barrier must be opened and closed fully, free from a sticking in the midway.
No abnormal sound must be heard during the operation.
4
Appearance condition
Scratches or stains must not be noticeable, except that the customer permits them.
5
Foreign matters on the lens
The lens condition must not be worse than that when the camera was received from the customer.
Gears
Boss
Zoom Motor Unit
Two Screws
Lens stored
Lens at TELE end
Upward
Downward
Horizontal
Upper oblique 45˚
Lower oblique 45˚
Full stroke check
Page of 6
Display

Sony DSC-P150 (serv.man8) Service Manual ▷ Download

  • DOWNLOAD Sony DSC-P150 (serv.man8) Service Manual ↓ Size: 684.57 KB | Pages: 6 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DSC-P150 (serv.man8) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DSC-P150 (serv.man8) Digital Camera. Information contained in Sony DSC-P150 (serv.man8) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.