Sony DSC-P10 / DSC-P12 (serv.man3) Service Manual ▷ View online
8
Identifying the parts
See the pages in parentheses for details of operation.
A
POWER button
(14)
B
POWER lamp
(14)
C
Shutter button
(21)
D
Hook for wrist strap
E
Flash
(26)
F
Speaker (bottom surface)
G
Microphone
H
Finder window
I
Self-timer lamp
(25)
/
AF illuminator
(27, 104)
J
Lens
K
Tripod receptacle (bottom
surface)
surface)
•
Use a tripod with a screw length of less than
5.5 mm (7/32 inch). You will be unable to
firmly secure the camera to tripods having
longer screws, and may damage the camera.
5.5 mm (7/32 inch). You will be unable to
firmly secure the camera to tripods having
longer screws, and may damage the camera.
•
Do not touch the microphone while recording.
•
The “3.2 MEGA PIXELS” indicated on DSC-
P8 shows the number of effective pixels. The
number of actually recorded pixels is maximum
3.1 MEGA PIXELS. The effective pixels
number is determined according to the
recommendation of the JCIA (Japan Camera
Industry Association).
P8 shows the number of effective pixels. The
number of actually recorded pixels is maximum
3.1 MEGA PIXELS. The effective pixels
number is determined according to the
recommendation of the JCIA (Japan Camera
Industry Association).
2
3
4
5
6
1
7
8
9
0
qa
Attaching the strap
9
A
Control button
(Menu on) (
(Menu on) (
v
/
V
/
b
/
B
/
z
)
(14)
/
(Menu off) ( /
/
7
/
)
(26, 25, 23,
24)
B
(Display/LCD on/off) button
(28)
C
Finder
(28)
D
LCD screen
E
MENU button
(39, 100)
F
DC IN jack
(10, 13)
G
A/V OUT (MONO) jack
(32)
H
(Image Size/Delete)
button
(18, 34)
I
Mode dial
(15, 22)
: To shoot still images in auto
adjustment mode
: To shoot still images in
programmed mode
SCN: To shoot in the Scene
Selection mode
SET UP: To set the SET UP items
: To shoot movies, Clip
Motion images or Multi
Burst mode images
: To view or edit images
J
Zoom button (for shooting)
(23)
/
Index button (for viewing)
(31)
K
Battery/“Memory Stick” cover
L
RESET button
(87)
M
Access lamp
(17)
N
Battery eject lever
(10)
O
Jack cover
P
(USB) jack
(78)
9
0
qa
qs
qd
qf
qg
qh
1
2
3
4
5
6
7
8
/CHG
Self-timer
(25)
/recording
lamp (red)
(22)
AE/AF lock lamp
(green)
(green)
(21)
/CHG lamp (orange)
(11, 26)
10
Charging the battery pack
,
Open the battery/“Memory
Stick” cover.
Stick” cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when
charging the battery pack (page 14).
•
Your camera operates with the
“InfoLITHIUM” NP-FC11 battery pack (C
type) (supplied). You can use only C type
battery pack (page 109).
“InfoLITHIUM” NP-FC11 battery pack (C
type) (supplied). You can use only C type
battery pack (page 109).
,
Install the battery pack, then
close the battery/“Memory
Stick” cover.
close the battery/“Memory
Stick” cover.
Insert the battery pack with the B mark
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
•
The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment down.
the battery eject lever at the front of the battery
compartment down.
,
Open the jack cover and
connect the AC-LS5 AC
Adaptor (supplied) to the DC IN
jack of your camera.
connect the AC-LS5 AC
Adaptor (supplied) to the DC IN
jack of your camera.
Open the cover in the arrow direction as
illustrated above. Connect the plug with the
v mark facing up.
illustrated above. Connect the plug with the
v mark facing up.
•
Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
with a metallic object, as this may cause
malfunction.
•
Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
1
2
Battery eject lever
3
DC plug
AC
Adaptor
Adaptor
Jack cover
Getting started
11
G
e
tti
ng st
ar
te
d
, Connect the power cord (mains
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).
then to a wall outlet (wall
socket).
The /CHG lamp (orange) lights up when
charging begins, and goes off when
charging is completed.
charging begins, and goes off when
charging is completed.
•
After charging the battery pack, disconnect the
AC Adaptor from the DC IN jack of your
camera.
AC Adaptor from the DC IN jack of your
camera.
To remove the battery pack
Open the battery/“Memory Stick” cover.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
•
Be careful not to drop the battery pack when
removing it.
removing it.
Battery remaining indicator
The battery remaining indicator on the LCD
screen shows the remaining shooting or viewing
time.
screen shows the remaining shooting or viewing
time.
•
The black portion of the battery remaining
indicator in the illustration shows the actual
remaining time.
indicator in the illustration shows the actual
remaining time.
•
When you switch the LCD screen on/off, it
takes about one minute for the correct battery
remaining time to appear.
takes about one minute for the correct battery
remaining time to appear.
•
The displayed time remaining may not be
correct under certain circumstances or
conditions.
correct under certain circumstances or
conditions.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC-LS5 AC
Adaptor at a temperature of 25°C (77°F).
discharged battery pack using the AC-LS5 AC
Adaptor at a temperature of 25°C (77°F).
4
Power cord
(mains lead)
(mains lead)
2
To wall outlet (wall socket)
1
/CHG
/CHG lamp
Battery eject lever
Battery pack
Charging time
(min.)
(min.)
NP-FC11 (supplied)
Approx. 150
4
101
S AF
3.1M
60
min
Click on the first or last page to see other DSC-P10 / DSC-P12 (serv.man3) service manuals if exist.