DOWNLOAD Sony DSC-N2 (serv.man4) Service Manual ↓ Size: 589.38 KB | Pages: 34 in PDF or view online for FREE

6-19

DSC-N2_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. F No. Compensation
4. Measure Gain Adj.
5. Mechanical Shutter Adj.
6. Light Value Adj.
7. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 3.
2) The Automatic Adjustment Program executes the “1. Data Set-

ting during Camera Adj.”.

3) Upon successful completion of “1. Data Setting during Cam-

era Adj.”, “2. Picture Frame Setting” is executed. The follow-
ing message is displayed, and then referring to Fig. 6-1-25 to
Fig. 6-1-27 (See page 6-18), set the subject and click the [OK]
button.

After that, the next message is displayed. Then, change the
chart in accordance with the message.

4) Click the [OK] button, and the items from “3. F No. Compen-

sation” to “7. Release of Data Setting during Camera Adj.”
will be executed.

5) Upon successful completion of all items of the CAMERA

Adjustment 3, the following message is displayed. Click the
[OK] button.

6-20

DSC-N2_ADJ

6) A picture captured by the camera is displayed on the screen,

and the adjustment and checking are performed.

Note: If the following message is displayed, the picture frame

setting is faulty. Check the picture frame, and then perform
readjustment.

7) Upon successful completion of the adjustment, the following

message is displayed. Click the [OK] button.

8) Perform the “Camera Adjustment 4” successively without turn-

ing off the power switch of the camera.

[Adjustment method]
1) Start the AWB Adjustment Program (N2AwbAdjustment.exe).
2) Click the [Connect] button to set the camera to the adjustment

mode.

3) Adjust the mode switch of the camera to “CAMERA” and set

MACRO mode. Shoot the 9 colors chart with the zoom at WIDE
end.

4) Adjust the camera direction and distance to set the picture

frame. (Refer to 3. Picture Frame Setting)

5) Click the [AWB 3200K-5800K Standard Data Input] button.

6-21

DSC-N2_ADJ

At this time, the following message is displayed, and click the
[Yes] button if the check result display at the upper right of
Color Reproduction Check screen is OK, or the [No] button if
NG.

5) Upon successful completion of “3. Color Reproduction Adj.

& Check”, the following message is displayed. Change the
chart in accordance with the message.

6) Click the [OK] button, and the items from “4. CCD Linearity

Check” to “7. Release of Data Setting during Camera Adj.”
will be executed.

7) Upon successful completion of all items of the CAMERA

Adjustment 4, the following message is displayed. Click the
[OK] button.

Note: After executing the “AWB 3200-5800K Standard Data In-

put” perform the “CAMERA Adjustment 4” successively
without turning off the power switch of the camera.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. Color Reproduction Adj. & Check
4. CCD Linearity Check
5. CCD White Defect Compensation Check
6. CCD Black Defect Compensation Check
7. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 4.
2) The Automatic Adjustment Program executes the “1. Data Set-

ting during Camera Adj.”.

3) Upon successful completion of “1. Data Setting during Cam-

era Adj.”, “2. Picture Frame Setting” is executed. The follow-
ing message is displayed, and then referring to Fig. 6-1-25 to
Fig. 6-1-27 (See page 6-18), set the subject and click the [OK]
button.

4) After that, “3. Color Reproduction Adj. & Check” will be ex-

ecuted. Upon completion of adjustment, the check result is
displayed on the Color Reproduction Check screen.

6-22

DSC-N2_ADJ

Note: “CAMERA Adjustment 5” is available only once after the

power is turned on. If the adjustment is retried, turn off the
power and turn on again.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Adj.
3. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of CAMERA Adjustment 5.
2) The Automatic Adjustment Program executes the “1. Data

Setting during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “3. Preparing the Flash
Adjustment Box” (see page 6-9).)

4) Press the [OK]  button, and the “2. Strobe Adj.” will be ex-

ecuted.

5) During execution of “2. Strobe Adj.”, the following message

is displayed. After checking the flashing of strobe light, click
the  [OK]  button. (This message is displayed 2 times during
execution of adjustment.)

6) Upon successful completion of “2. Strobe Adj.”, “3.Release

of Data Setting during CAMERA Adj.” is executed.

7) Upon successful completion of all items of the CAMERA

Adjustment 5, the following message is displayed. Click the
[OK] button.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Auto Focus Illumination Check
3. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of CAMERA Adjustment 6.
2) The Automatic Adjustment Program executes the “1. Data

Setting during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “3. Preparing the Flash
Adjustment Box” (see page 6-9).)

4) Press the [OK]  button, and the “2. Auto Focus Illumination

check” will be executed.

5) Upon successful completion of the “2. Auto Focus Illumina-

tion Check”, the “3. Release of Data Setting during Camera
Adj.” will be executed successively.

6) Upon successful completion of all items of the CAMERA

Adjustment 6, the following message is displayed. Click the
[OK] button.