DOWNLOAD Sony DSC-N2 (serv.man2) Service Manual ↓ Size: 7.49 MB | Pages: 59 in PDF or view online for FREE

Model
DSC-N2 (serv.man2)
Pages
59
Size
7.49 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-n2-sm2.pdf
Date

Sony DSC-N2 (serv.man2) Service Manual ▷ View online

DSC-N2_L2
2-2
HARDWARE LIST
HARDWARE LIST
The following flow chart shows the disassembly procedure.
2-1. DISASSEMBLY
2
2
2
1
Flexible board 
x1
2
Claw 
x3
3
Microphone holder
4
#45 
x1
5
#46 
x4
6
Cabinet (rear) block
1
Insert the flat blade 
screw driver.
2
Claw 
x1
3
Claw 
x2
4
Multi cap
5
Flexible board 
x2
6
#46 
x1
7
Remove the SY-MC board.
8
Flexible board 
x2
9
SY-MC board.
1
#45 
x5
2
Claw 
x2
3
Cabinet (front) block
4
Flexible board 
x2
5
Flexible board 
x1
6
Lens block
6
5
4
4
Refer to page 2-1 
" Discharging of the ST-129 flexible board's 
charging capacitor (C901) ", 
when discharging the capacitor.
1
Claw 
x1
2
Claw 
x2
3
Remove the ST board.
4
Claw 
x3
5
Holder (AF)
6
Discharging the Capacitor.
1
Rotate the ornamental ring (A), 
and release the bond.
2
Ornamental ring (A)
3
Insert the tweezers etc..
4
Claw 
x3
5
Barrier block assembly
1
2
3
4
4
5
6
7
1
2
3
4
5
6
3
1
1
2
3
4
6
7
5
8
5
9
1
2
8
3
1
2
4
4
5
1
7
Claw 
x1
8
ST board
Note: When you exchange 
barrier block assembly 
and ornamental ring (A), be sure 
to follow the procedure carried on 
"2-3. Exchange Method of Barrier
Assembly" (2-4 page).
Position of claws
(#45)
(#46)
HELP
(#45)
(#45)
(#45)
(#46)
2
HELP
HELP
DSC-N2_L2
2-3
2-2. THE  METHOD  OF  ATTACHMENT  OF  CABINET  CENTER  BLOCK
Lock claw (BT)
MS guide light
BT cover
BT cover
Spring (lock claw)
Cabinet (center) block
boss
hook
1
2
3
4
1
Spring (lock claw) 
x1
2
Lock claw (BT) 
x1
3
BT cover 
x1
Slide until the hook of the BT cover 
reaches the boss of the cabinet.
4
MS guide light 
x1
5
Slide the BT cover at the bottom.
Check it the BT cover is locked and not removed.
5
2-4
DSC-N2_L2
2-3. EXCHANGE  METHOD  OF  BARRIER  ASSEMBLY
2-3-1. PEEL  OFF  OLD  ORNAMENTAL  RING  (A)
Turn on the power, and set the zoom to the TELE end. Remove the battery forcibly.
Turn the ornamental ring (A) clockwise to remove.
* Discard the removed ornamental ring (A).
Ornamental ring (A)
2-3-2. REMOVE  OLD  BARRIER  BLOCK  ASSEMBLY
Inert tweezers, etc. into a slit in the lens, and pry the barrier block assembly with the fulcrum at a hole in the 1 group frame.
* Discard the removed barrier block assembly.
Slit
1 group frame
Claw
Claw
Barrier block 
assembly
2-5
DSC-N2_L2
Meeting the part A with the part a, B with b, and C with c respectively, mount a new barrier block assembly on the lens (fit it completely,
avoiding loose engagement or floating).
2-3-3. INSTALL  NEW  BARRIER  BLOCK  ASSEMBLY
Put the battery in the camera, and turn on the power (press twice to retract the lens-barrel).
Note: Check that the diaphragm of the barrier block assembly is not opened slightly or half-closed.
A
a
b
c
B
C
Page of 59
Display

Click on the first or last page to see other DSC-N2 (serv.man2) service manuals if exist.