Sony DSC-N2 (serv.man2) Service Manual ▷ View online
1-1
DSC-N2_L2
1. SERVICE NOTE
Self-diagnosis display
• C: ss: ss
• C: ss: ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E: ss: ss
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory Stick” or internal
memory.
memory.
Cause
Trouble with hardware.
“Memory Stick” or internal memory is
unformatted.
unformatted.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:ss
E:91:ss
1-1. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY
Insert a new “Memory Stick”.
“Memory Stick” is broken.
Turn the power off and on again.
Trouble with internal memory.
INTERNAL MEMORY ERROR
Checking of lens drive circuit.
When failed in the focus and zoom
initialization.
initialization.
—
Checking of flash unit or replacement
of flash unit. (Note)
of flash unit. (Note)
Abnormality when flash is being
charged.
charged.
Note: After repair, be sure to perfom “1-2. PROCESS AFTER FIXING FLASH ERROR”.
1-2. PROCESS AFTER FIXING FLASH ERROR
When “FLASH error” (Self-diagnosis Code E : 91 : ** ) occurs, to prevent any abnormal situation caused by high voltage, setting of the
flash is changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen.
flash is changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen.
Method for Initializing the Flash Error Code
Initializes the setting to the default setting.
The message “Initialize all settings Ready?” appears.
• Make sure that the power is not disconnected during resetting.
Initialize
OK
Resets the settings to the default setting.
Cancel
Cancels the resetting.
1-2
DSC-N2_L2
1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
(INTERNAL MEMORY/ALBUM/MUSIC)
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: 1 When replacing the SY-165 board, erase the data in internal memory of the board before replacement.
Note: 2 When replacing the SY-165 board or the IC401 on the SY-165 board, execute formatting and initialize the internal memory after
Note: 2 When replacing the SY-165 board or the IC401 on the SY-165 board, execute formatting and initialize the internal memory after
replacement.
Method for Copying the Data in Internal Memory or Album
Method for Formatting the Internal Memory
Method for Formatting the Album
Copies all images in the internal memory or the Album to a “Memory Stick Duo”.
1
Insert a “Memory Stick Duo” having 32 MB or larger capacity.
2
Touch media ([Internal Memory] or [Album]) you want to copy the image files from.
The message “All data in internal memory will be copied (All data in Album will be copied)
Ready?” appears.
The message “All data in internal memory will be copied (All data in Album will be copied)
Ready?” appears.
3
Touch [OK].
Copying starts.
Copying starts.
Copy
Internal Memory
Copies the image files in the internal memory.
Album
Copies the image files in the Album.
Copying
102_COPY
• Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files
using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or
possibly corrupting the data.
possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory or Album are retained even after copying. To delete the
contents of the internal memory or Album, execute the [Format] command in
(Internal Memory)
or
(Album).
• You cannot select a folder to be copied on a “Memory Stick Duo”.
• Even if you copy data, a
(Print order) mark is not copied.
• When copying from the Album, the image protection setting is not copied.
• When playing back images in the Album, the order of images displayed on the screen may be different
• When playing back images in the Album, the order of images displayed on the screen may be different
from that of images copied on the “Memory Stick Duo”.
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
The message “All data in internal memory will be erased Ready?” appears.
Format
OK
Formats the internal memory.
Cancel
Cancels the formatting.
Formats the Album.
• Note that formatting irrevocably erases all data in the Album, including even protected images.
The message “All data in Album will be erased Ready?” appears.
Format
OK
Formats the Album.
Cancel
Cancels the formatting.
1-3
DSC-N2_L2
Method for Formatting the Music
If you cannot play back a Music file for the Slide Show, the Music file might be corrupted. If
this happens, perform [Format Music], then transfer the music by [Download Music] using the
supplied “Music Transfer” software.
this happens, perform [Format Music], then transfer the music by [Download Music] using the
supplied “Music Transfer” software.
• If you format the write-in-area of the Music file, all Music files are deleted and cannot be restored.
The message “All data will be erased Ready?” appears.
Format Music
OK
Formats the Music files. All data other than Music files remain as
it is.
it is.
Cancel
Cancels the formatting.
1-4E
DSC-N2_L2
1-4. PRECAUTION ON REPLACING THE SY-165 BOARD
VIDEO OUT Default Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setteing because of broadcast
system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code is right. If not, rewrite
to the right value.
system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code is right. If not, rewrite
to the right value.
VIDEO OUT Default Data
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 89, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 89, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click
[Save]
on the SEUS screen.
6) Select page: 80, address: 34, and check that the data is “00”.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
Initial Language Data Check
If the SY-165 board was replaced, initial language setting may be changed. Accordingly, change the following data so as to set same initial
language as that of the set distributing in each region.
language as that of the set distributing in each region.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
Initial Language Data
Page
Address
Data
Language
GP1
GP2
GP3
GP4
4F
88
00
English
z
z
z
01
Japanese
z
04
Spanish
z
z
08
Simplified Chinese
z
0B
Russian
z
0D
Korean
z
Note: GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish or Russian.
GP4 is either English, Spanish, Simplified Chinese or Korean.
GP3 is either English, Spanish or Russian.
GP4 is either English, Spanish, Simplified Chinese or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 88, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 88, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click
[Save]
on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
Address
00
01
89
4F
Page
Data
NTSC
PAL
00
01
A2
4F
Click on the first or last page to see other DSC-N2 (serv.man2) service manuals if exist.