Sony DSC-N2 (serv.man14) Service Manual ▷ View online
SEÇÃO 6
AJUSTES
DSC-N2
Revision History
Revision History
Link
Link
Lista de ferramentas de serviço
Itens dos ajustes quando trocar principais peças e as placas
Antes de iniciar os ajustes
AJUSTE DE SISTEMA DO LCD
ERRO
AJUSTE DE SISTEMA DE CONTROLE
AJUSTE DE SISTEMA DO VÍDEO
AJUSTE DE SISTEMA DA CAMERA
PROGRAMAS DE AJUSTES
INICIALIZAÇÃO DE DADOS
PREPARAÇÕES ANTES DOS AJUSTES
AJUSTES DA SEÇÃO DE CÂMERA
MODO DE SERVIÇO
MODO DE SERVIÇO
Sony EMCS Co.- Sony Brasil Ltda
Auto-ADJ
DSC-N2_ADJ
Ver. 1.2 2007.02
9-
890-089-51
• Use este Manual de Servico junto com o Automatic Adjustment Program (DSC-N2 Auto-Adj Ver1.1r02.exe)
e o AWB Adjustment Program (N2AwbAdjustment.exe).
• Precaução sobre reparo da placa SY-165
2007B0500-1
© 2007.2
Publicado por Product & Quality Div.
— 2 —
DSC-N2_ADJ
ÍNDICE
Section
Title
Page
6. AJUSTES
Before Starting Adjustment ······················································· 6-1
1-1.
1-1.
Adjusting Items When Replacing
Main Parts and Boards ···················································· 6-5
Main Parts and Boards ···················································· 6-5
1-2.
List of Service Tools ························································ 6-6
6-1.
Camera Section Adjustments ··········································· 6-7
1-1.
Preparations Before Adjustments ···································· 6-7
1-2.
Adjustment Programs ···················································· 6-11
1-3.
Video System Adjustments ············································ 6-13
1-4.
Camera System Adjustments ········································· 6-15
1-5.
LCD System Adjustments ············································· 6-23
1-6.
Control System Adjustments ········································· 6-25
1-7.
Error ··············································································· 6-26
1-8.
Initialization of Data ······················································ 6-28
6-2.
Service Mode ································································· 6-29
6-1
DSC-N2_ADJ
SEÇÃO 6
AJUSTES
Antes de iniciar os ajustes
Precaução sobre Reparo da Placa SY-165
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform “VIDEO OUT Default Data Check” and “INITIAL LANGUAGE Default Data Check” mentioned below,
and also the adjustment items necessary after SY Board replacement.
VIDEO OUT Default Data Check
If the SY-165 board is replaced, the broadcast system data setting (NTSC/PAL) might be changed.
Check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value.
Check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value.
VIDEO OUT Default Data
Page
Address
Data
NTSC
PAL
4F
89
00
01
4F
A2
00
01
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 89, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click [Save] on the SEUS screen.
6) Select page: 80, address: 34, and check that the data is “00”.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 89, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click [Save] on the SEUS screen.
6) Select page: 80, address: 34, and check that the data is “00”.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
6-2
DSC-N2_ADJ
INITIAL LANGUAGE Default Data Check
If the SY-165 board is replaced, initial language setting may be changed. Check the default data of INITIAL LAN-
GUAGE if destination code is right. If not, rewrite to the right value.
GUAGE if destination code is right. If not, rewrite to the right value.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
Initial Language Data
Page
Address
Data
Language
GP1
GP2
GP3
GP4
4F
88
00
English
z
z
z
01
Japanese
z
04
Spanish
z
z
08
Simplified Chinese
z
0B
Russian
z
0D
Korean
z
GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Simplified Chinese, or Korean.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 88, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 88, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
