Sony DSC-M2 (serv.man2) Service Manual ▷ View online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver. 1.2 2006. 06
LEVEL
1
Link
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
Link
Sony EMCS Co.
2006F1600-1
©2006.06
Published by Kohda TEC
9-876-897-41
DSC-M2
DSC-M2
DSC-M2
US Model
Canadian Model
AEP Model
UK Model
E Model
Korea Model
Chinese Model
Hong Kong Model
Tourist Model
Japanese Model
DIGITAL STILL CAMERA
— 2 —
DSC-M2
SPECIFICATIONS
Camera
[System]
Image device
7.17 mm (1/2.5 type) color
CCD, Primary color filter
CCD, Primary color filter
Total pixel number of camera
Approx. 5 255 000 pixels
Effective pixel number of camera
Approx. 5 090 000 pixels
Lens
Carl Zeiss Vario-Tessar
3x zoom lens
f = 6.33 – 19.0 mm (38 –
114 mm when converted to a
35 mm still camera)
F3.5 – 4.4
3x zoom lens
f = 6.33 – 19.0 mm (38 –
114 mm when converted to a
35 mm still camera)
F3.5 – 4.4
Exposure control Automatic exposure, Scene
Selection (9 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent,
Flash
Fluorescent, Incandescent,
Flash
File format (DCF compliant)
Still images: Exif Ver. 2.2
JPEG compliant, DPOF
compatible
Movies: MPEG-4 compliant
(Stereo)
JPEG compliant, DPOF
compatible
Movies: MPEG-4 compliant
(Stereo)
Recording media “Memory Stick Duo”
Flash
Recommended distance (ISO
set to Auto): approx. 0.1 m to
2.6 m (3 15/16 inches to 8 feet
6 3/8 inches) (W)/
approx. 0.5 m to 2.1 m
(1 feet 7 11/16 inches to 6 feet
10 11/16 inches) (T)
set to Auto): approx. 0.1 m to
2.6 m (3 15/16 inches to 8 feet
6 3/8 inches) (W)/
approx. 0.5 m to 2.1 m
(1 feet 7 11/16 inches to 6 feet
10 11/16 inches) (T)
[Input and Output connectors]
Multi connector
USB communication
Hi-Speed USB (USB 2.0
compliant)
compliant)
[LCD screen]
LCD panel
6.2 cm (2.5 type) TFT drive
Total number of dots
123 200 (560x220) dots
[Power, general]
Battery pack used
Rechargeable battery pack
NP-FT1
NP-FT1
Power requirements
3.6 V
Power consumption
(during shooting)
(during shooting)
1.2 W
Operating temperature
0
°
C to +40
°
C (+32
°
F to
+104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to
+140
°
F)
Dimensions
51.2x123.1x32.4 mm
(2 1/8x4 7/8x1 5/16 inches)
(W/H/D, excluding protrusions)
(2 1/8x4 7/8x1 5/16 inches)
(W/H/D, excluding protrusions)
Mass
Approx. 210 g (7.4 oz)
(including NP-FT1 battery
pack, “Memory Stick Duo” and
wrist strap, etc.)
(including NP-FT1 battery
pack, “Memory Stick Duo” and
wrist strap, etc.)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching III
Compatible
PictBridge
Compatible
Cyber-shot Station UC-MB
[Input and Output connectors]
A/V OUT (STEREO) jack (Stereo)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Z,
unbalanced, sync negative
Audio: 327 mV (at a 47 k
Audio: 327 mV (at a 47 k
Z
load)
Output impedance 1 k
Output impedance 1 k
Z
USB jack
mini-B
USB connection High-Speed USB
(USB 2.0 High-Speed
compatible)
compatible)
DC IN jack
Camera connector
AC Adaptor AC-LS5
Input rating
100 V to 240 V AC,
50/60 Hz, 11 W
50/60 Hz, 11 W
Output rating
4.2 V DC*
* See the label on the AC
Adaptor for other
specifications.
specifications.
Operating temperature
0
°
C to +40
°
C (+32
°
F to
+104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to
+140
°
F)
Dimensions
Approx. 48x29x81 mm
(1 15/16x1 3/16x3 1/4 inches)
(W/H/D, excluding projecting
parts)
(1 15/16x1 3/16x3 1/4 inches)
(W/H/D, excluding projecting
parts)
Mass
Approx. 130 g (5.0 oz)
excluding power cord (mains
lead)
excluding power cord (mains
lead)
Rechargeable battery pack NP-FT1
Used battery
Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage DC 3.6 V
Capacity
2.4 Wh (680 mAh)
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DSC-M2
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
— 4 —
DSC-M2
Checking supplied accessories.
Make sure that the following accessories are supplied with your camcorder.
Power cord (Main lead) (1)
(E model)
(E model)
0
1-769-608-31
Power cord (Main lead) (1)
(CH model)
(CH model)
0
1-782-476-51
Power cord (Main lead) (1)
(UK/HK model)
(UK/HK model)
0
1-783-374-11
Power cord (Main lead) (1)
(US/CND model)
(US/CND model)
0
1-790-107-42
Power cord (Main lead) (1)
(JE model)
(JE model)
0
1-790-732-71
Power cord (Main lead) (1)
(J model)
(J model)
0
1-791-637-13
Power cord (Main lead) (1)
(KR model)
(KR model)
0
1-823-947-12
Power cord (Main lead) (1)
(TW model)
(TW model)
0
1-830-518-11
Power cord (Main lead) (1)
(AEP model)
(AEP model)
0
1-823-946-12
AC-LS5 AC Adaptor (1)
0
1-479-284-12
CD-ROM
(Picture Package for DSC-M2) (1)
2-645-841-01
(Nero Vision Express 3) (1)
2-653-111-01
(Picture Package for DSC-M2) (1)
2-645-841-01
(Nero Vision Express 3) (1)
2-653-111-01
Cyber-shot station (UC-MB) (1)
1-819-580-11
1-819-580-11
A/V connecting cable (1)
1-824-097-11
1-824-097-11
USB cable (1)
1-829-579-31
1-829-579-31
Wrist strap (1)
2-050-981-01
2-050-981-01
Other accessories
2-638-429-01 INSTRUCTION (READ THIS FIRST)(JAPANESE)(J)
2-638-429-11 INSTRUCTION (READ THIS FIRST)(ENGLISH)
2-638-429-11 INSTRUCTION (READ THIS FIRST)(ENGLISH)
(US,CND,AEP,UK,E,HK,TW,JE)
2-638-429-21 INSTRUCTION (READ THIS FIRST)(FRENCH/ITALIAN)
(AEP, CND)
2-638-429-31 INSTRUCTION (READ THIS FIRST)
(SPANISH/PORTUGUESE)(AEP,JE)
2-638-429-41 INSTRUCTION (READ THIS FIRST)(GERMAN, DUTCH)
(AEP)
2-638-429-51 INSTRUCTION (READ THIS FIRST)
(SIMPLIFIED CHINESE/TRADITIONAL CHINESE)(E,HK,TW,CH,JE)
2-638-429-61 INSTRUCTION (READ THIS FIRST)(KOREAN)(KR,JE)
2-638-429-81 INSTRUCTION (READ THIS FIRST)(RUSSIAN)(AEP)
2-638-429-81 INSTRUCTION (READ THIS FIRST)(RUSSIAN)(AEP)
Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
2-pin conversion adaptor (1)
(JE model)
1-569-007-12
(JE model)
1-569-007-12
2-pin conversion adaptor (1)
(E model)
1-569-008-21
(E model)
1-569-008-21
Rechargeable battery pack
(NP-FT1)(1)
(not supplied)
(NP-FT1)(1)
(not supplied)
Battery case (1)
(not supplied)
(not supplied)
• Abbreviation
CND : Canadian model
KR
KR
: Korea model
TW
: Taiwan model
CH
: Chinese model
HK
: Hong Kong model
JE
: Tourist model
J
: Japanese model
2-638-430-01 INSTRUCTION (USERS GUIDE)(JAPANESE)(J)
2-638-430-11 INSTRUCTION (USERS GUIDE)(ENGLISH)
2-638-430-11 INSTRUCTION (USERS GUIDE)(ENGLISH)
(US,CND,AEP,UK,E,HK,TW,JE)
2-638-430-21 INSTRUCTION (USERS GUIDE)(FRENCH/ITALIAN)
(AEP, CND)
2-638-430-31 INSTRUCTION (USERS GUIDE)
(SPANISH/PORTUGUESE)(AEP,JE)
2-638-430-41 INSTRUCTION (USERS GUIDE)(GERMAN, DUTCH)
(AEP)
2-638-430-51 INSTRUCTION (USERS GUIDE)
(SIMPLIFIED CHINESE/TRADITIONAL CHINESE)(E,HK,TW,CH,JE)
2-638-430-61 INSTRUCTION (USERS GUIDE)(KOREAN)(KR,JE)
2-638-430-81 INSTRUCTION (USERS GUIDE)(RUSSIAN)(AEP)
2-638-430-81 INSTRUCTION (USERS GUIDE)(RUSSIAN)(AEP)
Ferrite core (1)
*
1-543-798-11
Note:
•Items marked “*” are not stocked since they are seldom required for rou-
tine service. Some delay should be anticipated when ordering these items.
•Items marked “*” are not stocked since they are seldom required for rou-
tine service. Some delay should be anticipated when ordering these items.
Ver. 1.2 2006. 06
Display