Sony DSC-M1 (serv.man3) Service Manual ▷ View online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver 1.1 2005. 12
LEVEL
1
Link
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
Link
Sony EMCS Co.
2005L1600-1
©2005.12
Published by DI Technical Support Department
9-876-778-41
DSC-M1
DIGITAL STILL CAMERA
DSC-M1
DSC-M1
US Model
Canadian Model
Australian Model
Chinese Model
E Model
Tourist Model
Hong Kong Model
Korea Model
Japanese Model
— 2 —
DSC-M1
SPECIFICATIONS
x Camera
[System]
[System]
Image device
7.66 mm (1/2.4 type) color CCD
Primary color filter
Primary color filter
Total pixels number of camera
Approx. 5 255 000 pixels
Effective pixels number of camera
Approx. 5 090 000 pixels
Lens
Carl Zeiss Vario-Tessar
3 zoom lens
f = 6.7 – 20.1 mm (38 – 114 mm
3 zoom lens
f = 6.7 – 20.1 mm (38 – 114 mm
when
converted to a 35 mm still camera)
F3.5 – 4.4
F3.5 – 4.4
Exposure control
Automatic exposure, Scene
selection
(9 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent, Flash
Fluorescent, Incandescent, Flash
File format (DCF compliant)
Still images: Exif Ver. 2.2 JPEG
compliant, DPOF compatible
Movies: MPEG4 compli
compliant, DPOF compatible
Movies: MPEG4 compli
ant (Stereo)
Recording media
“Memory Stick Duo”
Flash
Recommended distance (ISO set to
Auto):
0.3 m to 1.8 m (11 7/8 inches to
70 7/8 inches) (W)
0.5 m to 1.7 m (19 3/4 inches to
67 inches) (T)
0.3 m to 1.8 m (11 7/8 inches to
70 7/8 inches) (W)
0.5 m to 1.7 m (19 3/4 inches to
67 inches) (T)
[Input and Output connectors]
Multi connector
USB communication
USB communication
Hi-Speed USB (USB 2.0 compli
ant)
[LCD screen]
LCD panel
6.2 cm (2.5 type) TFT drive
Total number of dots
123 200 (560
×
220) dots
[Power, general]
Used battery pack
NP-FT1
Power requirements
3.6 V
Power consumption (during normal
shooting)
shooting)
1.4 W
Operating temperature
0
°
C to +40
°
C (+32
°
F to +104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to +140
°
F)
Dimensions
51.0
×
114.0
×
27.8 mm
(2 1/8
×
4 5/8
×
1 1/8 inches)
(W/H/D, excluding maximum
protrusions)
protrusions)
Mass
Approx. 220 g (8 oz) (including
battery pack NP-FT1, “Memory Stick
Duo” and wrist strap)
battery pack NP-FT1, “Memory Stick
Duo” and wrist strap)
Microphone
Electret condenser microphone
Speaker
Piezoelectric speaker
Exif Print Compatible
PRINT Image Matching II
PRINT Image Matching II
Compatible
PictBridge
Compatible
x UC-MA Cyber-shot Station
[Input and Output connectors]
[Input and Output connectors]
A/V OUT (STEREO) jack (Stereo)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Ω
, unbalanced,
sync negative
Audio: 327 mV (at a 47 k
Ω
load)
Output impedance 1 k
Ω
USB jack B
USB connection
High-Speed USB
(USB 2.0 High-Speed compatible)
(USB 2.0 High-Speed compatible)
DC IN jack
Camera connector
Camera connector
x AC-LM5/LM5A AC Adaptor
Input rating
100 V to 240 V AC,
50/60 Hz
AC-LM5
10 W
AC-LM5A
11 W
50/60 Hz
AC-LM5
10 W
AC-LM5A
11 W
Output rating
4.2 V DC, 1.5 A
Operating temperature
0
°
C to +40
°
C (+32
°
F to +104
°
F)
Storage temperature
–20
°
C to +60
°
C (–4
°
F to +140
°
F)
Dimensions
AC-LM5
Approx. 47
Approx. 47
×
30
×
80 mm
(1 7/8
×
1 3/16
×
3 1/4 inches)
AC-LM5A
Approx. 48
Approx. 48
×
29
×
81 mm
(1 15/16
×
1 3/16
×
3 1/4 inches)
(W/H/D, excluding projecting parts)
Mass
AC-LM5
Approx. 170 g (6.0 oz)
AC-LM5A
Approx. 160 g (5.6 oz)
excluding power cord (mains lead)
Approx. 170 g (6.0 oz)
AC-LM5A
Approx. 160 g (5.6 oz)
excluding power cord (mains lead)
x NP-FT1 battery pack
Used battery
Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity 2.4 Wh (680 mAh)
x Accessories
AC-LM5/LM5A AC Adaptor (1)
Power cord (mains lead) (1)
Cyber-shot Station UC-MA (1)
NP-FT1 battery pack (1)
Battery case (1)
USB cable (1)
A/V connecting cable (1)
Wrist
strap
(1)
“Memory Stick Duo” (32 MB) (1)
Memory Stick Duo Adaptor (1)
CD-ROM (USB driver SPVD-012) (1)
Operating
instructions
(1)
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DSC-M1
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
— 4 —
DSC-M1
Checking supplied accessories.
Power cord (Main lead) (1)
(E model)
(E model)
0
1-769-608-11
Power cord (Main lead) (1)
(CH model)
(CH model)
0
1-782-476-13
Power cord (Main lead) (1)
(HK model)
(HK model)
0
1-783-374-11
Power cord (Main lead) (1)
(US/CND model)
(US/CND model)
0
1-790-107-22
Power cord (Main lead) (1)
(JE model)
(JE model)
0
1-790-732-12
Power cord (Main lead) (1)
(J model)
(J model)
0
1-791-637-13
Power cord (Main lead) (1)
(KR model)
(KR model)
0
1-823-947-11
Power cord (Main lead) (1)
(AUS model)
(AUS model)
0
1-827-945-11
AC-LM5/LM5A AC Adaptor (1)
0
1-477-730-61
CD-ROM
(USB Driver SPVD-012.1) (1)
2-187-885-01
(USB Driver SPVD-012.1) (1)
2-187-885-01
Cyber-shot station (UC-MA) (1)
1-818-873-11
1-818-873-11
A/V connecting cable (1)
1-765-080-62
1-765-080-62
USB cable (1)
1-827-754-21
1-827-754-21
Wrist strap (1)
2-320-915-01
2-320-915-01
2-pin conversion adaptor (1)
(JE model)
1-569-007-12
(JE model)
1-569-007-12
2-pin conversion adaptor (1)
(E model)
1-569-008-12
(E model)
1-569-008-12
“Memory Stick Duo” (32MB)(1)
(not supplied)
(not supplied)
Memory Stick Duo adaptor(1)
(not supplied)
(not supplied)
Rechargeable battery pack
(NP-FT1)(1)
(not supplied)
(NP-FT1)(1)
(not supplied)
Battery case (1)
(not supplied)
(not supplied)
Other accessories
2-320-916-01 MANUAL, INSTRUCTION (JAPANESE)(J)
2-320-916-11 MANUAL, INSTRUCTION (ENGLISH)
2-320-916-11 MANUAL, INSTRUCTION (ENGLISH)
(US/CND/E/HK/AUS/JE/CH)
2-320-916-21 MANUAL, INSTRUCTION (FRENCH)(CND)
2-320-916-31 MANUAL, INSTRUCTION (CHINESE)(E/HK/JE/CH)
2-320-916-41 MANUAL, INSTRUCTION (KOREAN)(KR/JE)
2-320-916-31 MANUAL, INSTRUCTION (CHINESE)(E/HK/JE/CH)
2-320-916-41 MANUAL, INSTRUCTION (KOREAN)(KR/JE)
2-320-917-01 MANUAL, INSTRUCTION (JAPANESE)((J)
• Abbreviation
CND : Canadian model
AUS : Australian model
CH
AUS : Australian model
CH
: Chinese model
HK
: Hong Kong model
KR
: Korea model
JE
: Tourist model
J
: Japanese model
Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Make sure that the following accessories are supplied with your camcorder.
Display