Sony DSC-L1 (serv.man14) Service Manual ▷ View online
6-11
DSC-L1
Button Name
Adjustment
Subject
Adjustment
Adjustment
Page
Address
Siemens star chart with ND filter
CAMERA Adjustment 1
Flange Back Adj.
for minipattern box (Note 1) or
Flange back adjustment jig
Flange back adjustment jig
Siemens star
CAMERA Adjustment 2
Flange Back Check
(1.0m from front the lens)
(Luminance: 200 to 400 lux)
(Luminance: 200 to 400 lux)
F No. Compensation
Clear chart
6F
60 to 64, 6B to 6D
CAMERA Adjustment 3
Mechanical Shutter Adj.
(Standard picture frame)
6F
6B to 6D, B8 to D7
Light Value Adj.
6F
65 to 67
AWB 3200K-5800K
6E
00 to 21, 24 to 49
Standard Data Input
AWB (ND) 3200K-5800K
6C
00 to 21, 24 to 49
(Note 2)
Standard Data Input
Color Reproduction Adj.
6E
60 to 67
Color Reproduction Check
Color Reproduction (ND) Adj.
6C
60 to 67
Color Reproduction (ND) Check
CCD Linearity Check
CCD White Defect
Clear chart
CAMERA Adjustment 4
Compensation Check
(Standard picture frame)
CCD Black Defect
Compensation Check
Compensation Check
6C
72 to 75
CAMERA Adjustment 5
Strobe Adj.
Flash adjustment box (50 cm)
6E
72 to 75
6F
D8 to EF
Auto focus illumination Check
6F
10 to 17
Table 6-1-2
1-3-2.
Adjustment Items of Camera System Adjust-
ment
ment
The adjustment items of camera system adjustment are as listed in
Table 6-1-2. The Automatic Adjustment Program divides the ad-
justment items into four, camera adjustment 1-5. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Table 6-1-2. The Automatic Adjustment Program divides the ad-
justment items into four, camera adjustment 1-5. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Note 1:
Dark Siemens star chart.
Note 2:
Use the Color Adjustment Program
(L1ColorAdjustment.exe).
(L1ColorAdjustment.exe).
6D
B0 to B7, C0 to C7,
D0 to DB, E1 to F2
D0 to DB, E1 to F2
6F
18 to 53
9 colors chart
(Standard picture frame)
(Standard picture frame)
6-12
DSC-L1
1-3-3.
Adjusting Method
1.
CAMERA Adjustment 1
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Adj.
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Adj.
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the
1) Click the
[CAMERA Adjustment 1 Start]
button.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject by referring to “Preparation of Flange Back Adj.”.
ject by referring to “Preparation of Flange Back Adj.”.
Fig. 6-1-12
4) If the
[OK]
button is clicked, “2. Flange Back Adj.” and “3.
Release of Data Setting during Camera Adj.” will be executed.
5) Upon successful completion of all items of the CAMERA
Adjustment 1, the following message is displayed. Click the
[OK]
button.
Fig. 6-1-13
Preparation of Flange Back Adj.
(Using the minipattern box)
1) The minipattern box is installed as shown in the following fig-
(Using the minipattern box)
1) The minipattern box is installed as shown in the following fig-
ure.
Note 1:
The attachment lenses are not used.
Note 2:
Take care not to hit the mini-pattern box when ex-
tending the lens.
tending the lens.
2) Install the minipattern box so that the distance between it and
the front of lens of camera is less than 3 cm.
3) Make the height of minipattern box and the camera equal.
4) Check the output voltage of the regulated power supply is the
4) Check the output voltage of the regulated power supply is the
specified voltage
±
0.01 Vdc.
5) Check that the center of Siemens star chart meets the center of
shot image screen with the zoom lens at TELE end and WIDE
end respectively.
end respectively.
Specified voltage: The specified voltage varies according to the
minipattern box, so adjustment the power sup-
ply output voltage to the specified voltage writ-
ten on the sheet which is supplied with the mini-
pattern box.
ply output voltage to the specified voltage writ-
ten on the sheet which is supplied with the mini-
pattern box.
Fig. 6-1-14
Preparation of Flange Back Adj.
(Using the flange back adjustment jig)
(Luminance: about 300 lux)
1) Install the flange back adjustment jig so that the distance be-
(Using the flange back adjustment jig)
(Luminance: about 300 lux)
1) Install the flange back adjustment jig so that the distance be-
tween it and the front of lens of camera is less than 3 cm.
Note 3:
Take care not to hit the flange back adjustment jig
when extending the lens.
when extending the lens.
2) Make the height of flange back adjustment jig and the camera
equal.
3) Check that the center of chart meets the center of shot image
screen with the zoom lens at TELE end and WIDE end respec-
tively.
tively.
Fig. 6-1-15
Minipattern box
Below 3 cm
Camera
Red (+)
Black (–)
Yellow (SENS +)
White (SENS –)
Black (GND)
Need not connected
Regulated power supply
Output voltage : Specified voltage
±
0.01 Vdc
Output current : more than 3.5 A
Flange back adjustment jig
Below 3 cm
Camera
6-13
DSC-L1
2.
CAMERA Adjustment 2
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Check
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Check
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the
1) Click the
[CAMERA Adjustment 2 Start]
button.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
ject in accordance with the message.
Fig. 6-1-16
4) Click the
[OK]
button is clicked, “2. Flange Back Check” is
executed. The following messages are displayed, and then op-
erate the camera to make a check in accordance with the mes-
sages.
erate the camera to make a check in accordance with the mes-
sages.
Fig. 6-1-17
5) Upon completion of “2. Flange Back Check”, “3. Release of
Data Setting during Camera Adj.” is executed.
6) Upon successful completion of all items of the CAMERA
Adjustment 2, the following message is displayed. Click the
[OK]
button.
Fig. 6-1-18
6-14
DSC-L1
4.
CAMERA Adjustment 3
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. F No. Compensation
4. Mechanical Shutter Adj.
5. Light Value Adj.
6. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. F No. Compensation
4. Mechanical Shutter Adj.
5. Light Value Adj.
6. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the
1) Click the
[CAMERA Adjustment 3 Start]
button.
2) The Automatic Adjustment Program executes the “1. Data Set-
ting during Camera Adj.”.
3) Upon successful completion of “1. Data Setting during Cam-
era Adj.”, “2. Picture Frame Setting” is executed. The follow-
ing message is displayed, and then referring to Fig. 6-1-19, set
the subject and click the
ing message is displayed, and then referring to Fig. 6-1-19, set
the subject and click the
[OK]
button.
Fig. 6-1-20
After that, the next message is displayed. Then, change the chart
in accordance with the message.
in accordance with the message.
Fig. 6-1-21
4) Click the
[OK]
button, and the items from “3. F No. Compen-
sation” to “6. Release of Data Setting during Camera Adj.”
will be executed.
will be executed.
5) Upon successful completion of all items of the CAMERA
Adjustment 3, the following message is displayed. Click the
[OK]
button.
Fig. 6-1-22
3.
Picture Frame Setting (Standard Picture Frame)
In the following adjustments, set the picture frame so as to attain
the positions shown in the following figure when shooting the color
bar chart.
the positions shown in the following figure when shooting the color
bar chart.
•
Camera Adjustment 3
•
AWB 3200K-5800K Standard Data Input
•
AWB (ND) 3200K-5800K Standard Data Input
•
Color Reproduction Adjustment
•
Color Reproduction Check
•
Color Reproduction (ND) Adjustment
•
Color Reproduction (ND) Check
•
Camera Adjustment 4
Check on the LCD screen
Fig. 6-1-19
Transparent window
Effective picture frame
A
A
B
Blue
C14
Magenta
White
Cyan
Red
Yellow
Green
W14
C
C
B
C =
A = B
C14: Filter for AWB 5800K adjustment
A
2
B
3
Click on the first or last page to see other DSC-L1 (serv.man14) service manuals if exist.