DOWNLOAD Sony DSC-J10 (serv.man2) Service Manual ↓ Size: 1.83 MB | Pages: 11 in PDF or view online for FREE

DSC-J10_ADJ

2011A29-1

© 2011.01

•  List of Service Tools and Equipment
•  Keys and Functions
•  Connecting the Equipment
•  Setting the Adjustment Mode
•  Enabling the Adjustment

•  MB/LCD FUNCTION CHECK
•  CAMERA SECTION ADJUSTMENTS

•  Tele Limit Adjustment
•  Focus Adjustment
•  OB Adjustment
•  WB/AGC Adjustment
•  MeShut26 Adjustment
•  MeShut80 Adjustment
•  Dark DP Adjustment
•  Light/S.S Adjustment
•  Flash WB Adjustment
•  Lens Option
•  Set Language Destination

1.0

2011.01

Official Release

—

—

DSC-J10_ADJ

5-2

When replacing these parts, adjust the items indicated by “ z ” in the following table.

Adjustment item

Replaced parts 

Optical Unit

CCD Block

Main Board

ST Board

Tele Limit Adjustment

z

z

z

Focus Adjustment

z

z

z

OB Adjustment

z

z

z

WB/AGC Adjustment

z

z

z

MeShut26 Adjustment

z

z

z

MeShut80 Adjustment

z

z

z

Dark DP Adjustment

z

z

z

Light/S.S Adjustment

z

z

z

Flash WB Adjustment

z

z

z

z

Lens Option

z

Set Language Destination

z

Following are keys and functions used in adjustment. (Fig. 5-1-2)

Personal computer

OS  : Windows2000/XP  Home/XP  Pro/Vista/7

RAM  : 256 MB (1 GB: Vista/7) or more recommended

USB  : 2.0 recommended (also compatible with 1.1)

Connect the USB to your PC and perform the adjustment during charging the built-in battery. (Fig. 5-1-3)

Personal computer
(Note)

J-1

J-3

J-5

J-4

J-6

Clear chart
J-6082-560-A

9 colors chart
J-6082-562-A

J-7

Mini flange back jig
J-6082-719-A

or

Flange back
adjustment jig
J-6082-563-A

J-2

Small pattern box
PTB-1450
J-6082-557-A

J-8

Camera table
J-6082-384-A

Background paper
J-2501-130-A

Dedicated USB cable
1-836-378-51

z button (OK Key)

b button (Left Key)

v button (Up Key)

B button

(Right Key)

V button (Down Key)

Control button

ON/OFF (Power) button

Power/charge lamp

(Playback) button

W/T (Zoom) button

Camera table
(J-6082-384-A)

PC

OS: Windows 2000/XP Home/XP Pro/Vista/7
RAM: 256MB (1GB: Vista/7) or more recommended
USB: 2.0 recommended (also compatible with 1.1)

To USB connector

To USB jack

Dedicated USB cable
(1-836-378-51)

DSC-J10_ADJ

5-3

The item that has been adjusted may be disabled to be readjusted.

If the readjustment is required, or when replacing Optical Unit, CCD Block, and ST Board, it is necessary to enable the adjustment upon the 

following procedure.

1)  Press the Control button “ b ” “ B ” and “ v ” “ V ” to choose an adjustment item.

2)  Press the “   (Playback)” button.

3)  Press the Control button “ b ”.

 

(Disable “00001” → Disable “00000”) (Fig. 5-1-6)

Example: For MB/LCD

The MB (Main Board)/LCD Function Check order is as follows.

If NG appears for more than one check item, confirm the adjusting 

environment and recheck. (Fig. 5-2-4)

Example: NG appears for 

                Iris and MSHUT.

1)

Check that the camera is on the adjustment mode.

 

For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).

2)  Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-2-2)

3)  Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “MB/LCD”, 

 

press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.

 

If the check is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the check. (Page 5-3)

4)  Confirm the indication on the screen.

 

If OK appears for all check items, press the “   (Playback)” button 

to return to adjustment menu. (Fig. 5-2-3)

Item

Description

RTC

Compare Crystal RTC time and OS time. If Crystal RTC time and OS time are the same, conform to spec.

Iris

Change difference aperture to check their luminance value. If it has different luminance value, conform to spec.

MSHUT

Change difference Mechanical Shutter ON/OFF to check their luminance value. If it has different luminance value,  

conform to spec.

ZOOM

Change difference Lens ZOOM IN/OUT position to check their zoom position value. If it has different zoom position

value, conform to spec.

STROB

Strobe board flash function, check if it can be triggered or not.

Mem

Check Internal memory size, conform to spec.

AUDIO

REC/PLAY audio file, check Microphone and Speaker are working.

When performing adjustments using the 9 colors chart, insert the 

transparent window in the lower right position. (Fig. 5-2-1)

1)  Download the adjustment tool “ADJ_Tool_J10_Ver[][][].zip” from the ESI homepage.

 

Uncompress the “ADJ_Tool_J10_Ver[][][].zip”, then confirm that it includes the following items.

•  EnableTest.txt

•  USB Driver (Folder)

•  Zoom ADJ (Folder)

•  Service Tool (Folder)

 

The above two folders “USB Driver” and “Zoom ADJ” are used in “5-3-10. Tele Limit Adjustment”. (Page 5-9)

 

The above folder “Service Tool” is used in “5-3-11. Set Language Destination”. (Page 5-10)

2)  Save the uncompressed file “EnableTest.txt” in the root directory of the removable disk named “Removable disk”.

Saving it in other directories may cause a malfunction of program.

If “EnableTest.txt” is still remained after the adjustment, delete it.

3)  Turn off the camera.

4)  Press the “   (Playback)” button while pressing the “T (W/T)” button and the Control button “ z ”.

5)  After a few seconds, the Adjustment mode screen will appear on the LCD display. (Fig. 5-1-4)

6)  Press the “   (Playback)” button, the initial screen for the adjustment mode will appear. (Fig. 5-1-5)

Small pattern box

9 colors chart

Transparent window

Equipment required: Small pattern box (PTB-1450)

9 colors chart

Small pattern box
(PTB-1450)

5 mm

or less Camera

DSC-J10_ADJ

5-4

The Tele Limit Adjustment should be done before all of those performed in 5-3-2 to 5-3-11.

Put the two folders “USB Driver” and “Zoom ADJ” downloaded in “5-1-5. Setting the Adjustment Mode” (Page 5-3) in any place of the PC.

The procedure of installing a USB Driver is as follows.

1)  Connect the camera started up with the Adjustment mode, and the PC with a Dedicated USB cable.

2)  Install the USB Driver according to the guidance on the screen.

Connect the equipment as shown below. (Fig. 5-3-1)

Double click the “ZoomADJ_Ver[][][].exe” in the “Zoom ADJ” folder to start up the Tele Limit Adjustment Tool. (Fig. 5-3-2)

The setting is finished normally.

The setting is complete.

Screen display

The setting is finished abnormally.

Malfunction of Tele Limit 

Adjustment result

Example:

 

Please Plug in

                USB!

Malfunction of Tele Limit 

Adjustment result

Example:

 

Zoom Calib 

                Value NG

Adjustment order

The Tele Limit Adjustment order is as follows.

Personal Computer

Dedicated USB cable

Power/charge lamp

Confirm the indication on the

Tele Limit Adjustment Tool screen.

Input the “Zoom Calib Value”, then press the “Write” button.

* The “Zoom Calib Value” is written on the top of the Optical Unit. (Fig. 5-3-3)

In case of the setting is finished normally, the
setting completion indication appears on the
Tele Limit Adjustment Tool screen. (Fig. 5-3-4)
The power of the camera turns off automatically.

In case of the setting is finished abnormally,
the following message appears on the Tele Limit
Adjustment Tool screen. (Fig. 5-3-5, 5-3-6)
In this case, perform the setting again upon
the message.

Finished abnormally.

Finished normally.

Tele Limit Data

XXXX

Check that the camera is on the adjustment mode.

* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).