DOWNLOAD Sony DSC-HX60 / DSC-HX60V Service Manual ↓ Size: 6.63 MB | Pages: 46 in PDF or view online for FREE

DSC-HX60/HX60V

4-14

19.  Remove the Core Unit_3 from the Front Assy and Linear Guide Barrel_A.

 

Core Unit_3

Linear Guide
Barrel_A

Front Assy

20.  Return the Linear Guide Barrel_A to the retracted end.
21.  Turn the rear edge of Front Assy about 12 degrees in the direction of arrow to detach the Front Assy from the Linear Guide Barrel_A.

Note: When detaching the Front Assy, do not stimulate the white part shown below. If it is stimulated, it may pop out by the action of the spring.

 

About 12
(Approx. 4mm) 

Linear Guide Barrel_A

Linear Guide Barrel_A

Rear edge of Front Assy

Front Assy

Spring

White part

22.  Turn the Barrier Frame to remove it from the 1 Group Frame Block Assy.

 

Front Assy

Barrier Frame

1 Group Frame Block Assy

DSC-HX60/HX60V

4-15

23.  Turn the Core Unit_4 in the direction of arrow to detach it.

Note: Though the Core Unit_4 has resistance due to the spring tension, it can be detached by turning it overcoming the resistance.

 

Cam Barrel

Core Unit_4

24.  Unhook the 2G Spring at two locations and remove the 2 Group Frame Block Assy from the Linear Guide Barrel_B.

 

Tweezers

2 Group Frame Block Assy

2 Group Frame Block Assy

Linear Guide Barrel_B

2G Spring

2G Spring

DSC-HX60/HX60V

4-16

Installation
1.   While matching the cabinet numbers of the Linear Guide Barrel_B and the 2 Group Frame Block Assy, insert the three projections of

 the 

2 Group Frame Block Assy into the three vertical grooves of the Linear Guide Barrel_B.

2.   Pull out the two hooks of the 2G Spring with tweezers and hook them to the 2 Group Frame Block Assy.

 

2 Group Frame Block Assy 

2 Group Frame Block Assy 

Linear Guide Barrel_B

Vertical groove

Vertical
grooves

Tweezers

Cabinet number

Cabinet number

Projections

2G Spring

2G Spring

3.   While matching the cabinet numbers of the Cam Barrel and the Linear Guide Barrel_B, insert the Linear Guide Barrel_B into the Cam 

Barrel turning the Linear Guide Barrel_B in the direction of arrow.

 

Cabinet number

Linear Guide Barrel_B

Cam Barrel

Core Unit_3

DSC-HX60/HX60V

4-17

4.   While matching the triangle mark on the 1 Group Frame Block Assy with the three square marks on the Barrier Frame, insert the 1 Group 

Frame Block Assy into the Barrier Frame.

5.   Turn the 1 Group Frame Block Assy to match the rightmost convex on the Barrier Frame with the convex on the 1 Group Frame Block Assy.
6.   While matching the convex position set in step 5 with the concave of the Linear Guide Barrel_A, insert the 1 Group Frame Block Assy into 

the Linear Guide Barrel_A.

 

Barrier Frame

Arrow mark

Barrier Frame

1 Group Frame
Block Assy

Triangle mark

Concave

Convex

Convex
position
set

1 Group Frame
Block Assy

Three square marks

Three square marks

1 Group Frame
Block Assy

1 Group Frame
Block Assy

Linear Guide Barrel_A

Cabinet number

7.   Slightly turn the rear edge of Barrier Frame in the direction of arrow to extend the Barrier Frame.

 

Linear Guide Barrel_A

Rear edge of Barrier Frame

Linear Guide
Barrel_A

Barrier Frame

8.   While matching the concave of the Front Assy with the triangle mark on the Core Unit_3, insert the Core Unit_3 into the Front Assy.

 

Triangle mark

Concave

Core Unit_3

Front Assy