DOWNLOAD Sony DSC-H50 (serv.man2) Service Manual ↓ Size: 7.2 MB | Pages: 75 in PDF or view online for FREE

DSC-H50_L2

Harness
(Microphone Unit)

Lib

Lib

Microphone Holder

Loudspeaker (1.3cm)

Cutout

Cutout

Lens Block Assy

Lens (Radiation) Sheet

Crease left point

Attach covering the flexible board.

0 to 1mm

Harness
(Loudspeaker (1.3cm))

DSC-H50_L2

2

  Fold the notch 3 or 4 times repeatedly to break.

Battery Terminal
Board

1

Insert the battery terminal board into a slit in the BT holder to install.

 

The battery terminal holder are attached with the notch for installation. 

Notch

Battery Terminal
Board

BT holder

DC-111 Flexible Board

Notch

Battery Terminal Board

DSC-H50_L2

Harness
(HN-042)
(Pink)

Harness (HN-043)
(White)

ST-195 Flexible
Board

ST-195 Flexible Board

Claw

Claws

Flash Unit

Soldering
Points

Harness (HN-044)
(Blue)

1

2

3

ST-194 Board

ST Base Assy

ST Base Assy

Lib

Pink

Pink

Blue

Blue

White

White

ST Insulating Sheet

Attach ST insulating sheet to ST base assy.

Soldering
Points

4

Lib

Solder three harnesses to ST-195 flexible board
and ST-194 board.
Note: Be careful about the colors of harnesses.

Attach ST-195 flexible board to ST base assy and
insert three harnesses to lib deeply.
Note: Be careful about the overlaps of harnesses.
Note: Be careful not to damage the covering of 
 

harnesses.

Insert the harnesses in the arrow direction so that
the harnesses go to right angle in lib.
Note: Be sure to perform it under the popping up
 

is closed.

DSC-H50_L2

5

6

7

8

Libs

Pink

Blue
White

Claw

Claw

Claw

FL Cover

Claw

Cabinet (Upper)

Pass three harnesses in lib.
Note: Be careful about the overlaps of harnesses.

Pull up the popping up and straighten three
harnesses.

Attach Cabinet (Upper).

Attach FL cover.