Sony DSC-H5 (serv.man13) Service Manual ▷ View online
6-3
DSC-H5_ADJ
Method for Copying or Erasing the Data in Internal Memory
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the
internal memory.)
internal memory.)
Method for copying the data in internal memory
Method for formatting the internal memory
Note 1:
When replacing the SY-150 board, erase the data in internal memory of the board before replacement.
Note 2:
When replacing the SY-150 board or the IC202 on the SY-150 board, execute formatting and initialize the
internal memory after replacement.
internal memory after replacement.
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
The default settings are marked with
The default settings are marked with
.
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
2 Select [OK] with v, then press z.
The format is complete.
Format
OK
See the following procedure.
Cancel
Cancels the formatting.
Copies all images in the internal memory to a “Memory Stick Duo”.
1 Insert a “Memory Stick Duo” having 32 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.
2 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3 Select [OK] with v, then press z.
Copying starts.
• Use a fully charged Nickel-Metal Hydride battery or the AC Adaptor (not supplied). If you attempt to
copy image files using a batteries with little remaining charge, the batteries may run out, causing copying
to fail or possibly corrupting the data.
to fail or possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
(Internal Memory Tool).
• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a
• Even if you copy data, a
(Print order) mark is not copied.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
6-4
DSC-H5_ADJ
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
(AF illumination LED)
(CCD imager)
(Timing gen., CCD signal process)
(Camera DSP)
(One NAND flash) (Note 4)
(Video amp.)
(PITCH, YAW sensor)
LCD9001
D001
IC002
IC001
IC101
IC202
IC601
SE501, 502
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE) (Note 3, 4, 5)
Lens block
Flash unit
LCD block
AF-105 board
CD-617 board
CH-199 board
SY-150 board
SY-150 board
SY-150 board
SY-150 board
AF-105 board
CD-617 board
CH-199 board
SY-150 board
VIDEO adjustment
Video output level adj.
z
z
z
(Note 1)
Hall adj.
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 1
Flange back adj.
z
z
z
z
CAMERA adjustment 2
Flange back check
z
z
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z z
z z z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 5
Strobe adj.
z
z z
z z z
CAMERA adjustment 6
Auto focus illumination check
z
z
z
CAMERA adjustment 7
Angular velocity sensor sensitivity adj.
z
z
V-COM adj.
White Balance adj.
(Note 1)
Initialization of data
z
z z z
z z z
z z
z
LCD adjustment
CAMERA adjustment 3
CAMERA adjustment 4
z
z z
1-1. ITENS DOS AJUSTES QUANDO TROCAR AS PLACAS E PRINCIPAIS PEÇAS
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data”, “Hall Adjustment” and “Wide Limit Adjust-
ment”. Perform them manually.
ment”. Perform them manually.
Note 2:
Use the AWB Adjustment Program (H5AwbAdjustment.exe).
Note 3:
When replacing the SY-150 board, erase the data in internal memory of the board before replacement.
Note 4:
When replacing the SY-150 board or the IC202 on the SY-150 board, execute formatting and initialize the internal memory after
replacement.
replacement.
Note 5:
When replacing the SY-150 board, perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” after re-
placement.
placement.
Table 6-1-1
6-5
DSC-H5_ADJ
1-2. Lista de ferramentas de serviço
•
Oscilloscope
•
Color monitor
Fig. 6-1-1
Note1:
Personal computer
OS:
OS:
Windows98/98SE/Me/2000/XP Home/XP Pro
RAM: 256MB or more recommended
USB:
USB:
2.0 recommended (also compatible with 1.1)
Two connectors are required.
Two connectors are required.
Note2:
In using the 9 colors chart on the pattern box PTB-450, adjust the chart size through the procedure shown below so that it matches
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
Fig. 6-1-2
360 mm
155 mm
280 mm
woody boad A
woody boad A
9 colors chart
135 mm
Personal computer
(Note 1)
(Note 1)
J-1
J-10
J-9
J-7
HASP key and application
for adjustment (SEUS)
for adjustment (SEUS)
Contact our service headquater of each area
how to get the application for adjustment
(SEUS) and HASP key.
how to get the application for adjustment
(SEUS) and HASP key.
J-2
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-4
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-6
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Back ground paper
J-2501-130-A
J-2501-130-A
9 colors chart (Note 2)
For PTB-1450:
J-6082-562-A
J-6082-562-A
J-5
J-8
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
USB cable
1-829-868-41
1-829-868-41
J-3
J-11
Connection code
DK-2AA
1-830-351-21
DK-2AA
1-830-351-21
AC power adaptor
AC-LS5
1-479-284-51
AC-LS5
1-479-284-51
J-12
6-6
DSC-H5_ADJ
Fig. 6-1-4
6-1. SEÇÃO AJUSTES DA CAMERA
1-1. PREPARAÇÕES INICIAIS PARA AJUSTES
1-1-1.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-4.
2) Start up the application for adjustment (SEUS).
2) Start up the application for adjustment (SEUS).
Note:
Before perform the adjustment, set the following data.
1) Select page: 40, address: 38 and set data: 00.
1) Select page: 40, address: 38 and set data: 00.
Fig. 6-1-3
PC
(The SEUS must be installed in the PC.)
OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
VIDEO Adjustment
Osilloscope
Terminated
75
75
Ω
AC IN
To USB
connector
connector
To AV OUT jack (Note)
Note: Do not connect the A/V cable when
perfoming the LCD Adjustment.
perfoming the LCD Adjustment.
HASP Key
To USB connector
USB cable
(1-829-868-41)
Audio (Black)
Video (yellow)
Color monitor
AC power adaptor
AC-LS5
(1-479-284-51)
AC-LS5
(1-479-284-51)
Insert the connection cord
DK-2AA (1-830-351-21)
DK-2AA (1-830-351-21)
.
Pattern box
Front of the lens
L = About 9 cm
L
Camera
Click on the first or last page to see other DSC-H5 (serv.man13) service manuals if exist.