DOWNLOAD Sony DSC-H400 Service Manual ↓ Size: 2.3 MB | Pages: 40 in PDF or view online for FREE

Model
DSC-H400
Pages
40
Size
2.3 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
dsc-h400.pdf
Date

Sony DSC-H400 Service Manual ▷ View online

DSC-H400
1-7
1-2. FUSE
F1
5.0V
F2  3.6V
MAIN BOARD (SIDE A)
MAIN BOARD (SIDE B)
Primary side
Ref. No. 
Part No. 
Description
 F1 
1-576-415-11 
FUSE (2A/32V)
 F2 
1-576-415-11 
FUSE (2A/32V)
DSC-H400
1-8
1-3. ACCESSORIES
901
902
903
904
905
906
907
Ref. No. 
Part No. 
Description
 901 
1-489-282-12 
AC Adaptor AC-UB10C (BR)
*901 1-489-282-31 
AC 
Adaptor 
AC-UB10C 
(CH)
 901 
1-490-429-21 
AC Adaptor AC-UB10C (US, CND)
 901 
1-490-429-61 
AC Adaptor AC-UB10C (AEP, UK, RU, E)
 902 
1-837-427-11 
Power cord (mains lead) (AEP, RU, E (EXCEPT Saudi))
 902 
1-837-801-12 
Power cord (mains lead) (BR)
 902 
1-837-835-21 
Power cord (mains lead) (UK, E (Saudi))
 903 
1-785-504-21 
Conversion (2P) Adaptor (E33)
  904 
1-837-783-31 
Dedicated USB cable
 905 
4-167-334-31  Shoulder 
strap
 906 
X-2589-725-1  Lens 
cap
*  907 
4-533-868-11 
Instruction Manual (ENGLISH)
*  907 
4-533-868-21 
Instruction Manual (ENGLISH, SPANISH)
*  907 
4-533-868-31 
Instruction Manual (ENGLISH, FRENCH)
*  907 
4-533-868-41 
Instruction Manual (ENGLISH, INDONESIAN)
Ref. No. 
Part No. 
Description
*  907 
4-533-868-51 
 Instruction Manual (SPANISH, BRAZILIAN 
PORTUGUESE)
*  907 
4-533-868-61 
 Instruction Manual (TRADITIONAL CHINESE, 
SIMPLIFIED CHINESE)
*  907 
4-533-868-71 
Instruction Manual (RUSSIAN, UKRAINIAN)
*  907 
4-533-868-81 
Instruction Manual (SIMPLIFIED CHINESE)
*  907 
4-533-869-11 
Instruction Manual (FRENCH, ITALIAN)
*  907 
4-533-869-21 
Instruction Manual (SPANISH, PORTUGUESE)
*  907 
4-533-869-31 
Instruction Manual (GERMAN, DUTCH)
*  907 
4-533-869-41 
Instruction Manual (CZECH, HUNGARIAN)
*  907 
4-533-869-51 
Instruction Manual (DANISH, SWEDISH)
*  907 
4-533-869-61 
Instruction Manual (SLOVAK, POLISH)
*  907 
4-533-869-71 
Instruction Manual (FINNISH, NORWEGIAN)
*  907 
4-533-869-81 
Instruction Manual (ARABIC, PERSIAN)
*  907 
4-533-869-91 
Instruction Manual (THAI, TURKISH)
Note 1:  Dedicated A/V cable (optional accessory)
 
Dedicated A/V cable is not supplied with this model.
 
 If you need dedicated A/V cable, order 1-834-312-4[] or 
VMC-15CSR1.
Ref. No.    Part No. 
Description
  
8-022-359-31 
Rechargeable battery pack NP-BX1/UC (US, CND)
  
8-022-359-50 
Rechargeable battery pack NP-BX1/CE (EXCEPT US, CND, CH)
  
8-022-359-71 
Rechargeable battery pack NP-BX1/CN (CH)
DSC-H400
2-1
2-1.  NOTES FOR FLEXIBLE BOARD
Make sure that the conductive side of a flexible board does not have any stain or foreign materials.
Do not touch the conductive side of flexible boards with bare hands.
Plug in a flexible board straight, fully into the connector until it reaches the end inside. (Fig. 1, Fig. 2, Fig. 3)
OK 
(The flexible board was plugged in straight 
and completely)
NG 
(The flexible board was plugged in 
crooked.)
NG 
(The flexible board was not plugged in 
completely.)
Flexible
Board
Flexible
Board
Connector
Connector
Reference line
Flexible
Board
Connector
Connector
Flexible
Board
Reference line
Connector
Connector
Flexible
Board
Flexible
Board
Reference line
Fig. 1
Fig. 2
Fig. 3
When opening the connector's holder in direction A, do not open 
it with excessive force.
When closing the connector's holder, press it evenly while pushing 
a flexible board in direction B.
Holder
Connector
Flexible Board
A
A
Holder
Insulation side
Connector
Flexible Board
B
•  Make sure that the flat cable and flexible board are not cracked 
or bent at the contact end.
•  Do not apply excessive force to the gilded flexible board.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
•  The proper way to disconnect a connector is to grab the con-
nector instead of the wires.  If you pull on the wires, they might 
be broken.
•  The proper way to connect a connector is to grab the connector 
instead of the wires.  If you push on the wires, they might be 
broken.
2. SERVICE  NOTE
2-2.  DISCHARGING OF THE FLASH CAPACITOR
The charging capacitor for the flash has been charged at high voltage.
Therefore, there is a possibility of an electric shock if you directly handle this capacitor.
The high-voltage charge will not be discharged by simply turning off the unit’s power.
Make sure any remaining voltage is discharged by short-circuiting the flash capacitor with a Short Jig.
Preparing the Short Jig
Make a Short Jig by connecting a small clip to each lead of a resistor with a rated value of approximately 1 kΩ /1 W.
In order to prevent an electric shock, wrap insulating tape completely around the resistor and its leads.
Resistor with a rated value of approximately 
1 k
Ω/1 W (Part No. 1-215-869-11).
Wrap insulating tape completely 
around the resistor and its leads.
Small clip
Small clip
DSC-H400
2-2
2-3.  METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the MENU screen. (When erasing the data, execute formatting the internal memory.)
Note 1:When replacing the Main Board Assy, erase the data in internal memory of the board before replacement.
Note 2:When replacing the Main Board Assy, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Copy
Copies all images in the internal memory to a memory card.
1.  Insert a memory card with sufficient free capacity into the camera.
2. MENU -   (Settings) - 
 (Memory Card Tool) - [Copy] - [OK] - 
Note
Make sure there is sufficient battery power. Otherwise, the battery power may run out when you attempt to copy
image files, causing the copy to fail and possibly corrupt the data.
Images cannot be copied individually.
Original images in internal memory are retained even after copying. To delete contents of internal memory, remove
the memory card after copying, then format internal memory ([Format] in [Internal Memory Tool]).
A new folder is created on the memory card and all data will be copied to it. You cannot choose a specific folder
and copy images to it.
Method for Formatting the Internal Memory or Memory Card
Format
Formats the memory card.
When you use a memory card with this camera for the first time, it is recommended to format the card using the
camera for stable performance of the memory card before shooting. Note that formatting permanently erases all data
on the memory card, and is unrecoverable. Save precious data on a computer, etc.
1. MENU -   (Settings) - 
 (Memory Card Tool) or 
 (Internal Memory Tool) - [Format] - [OK] - 
Note
Note that formatting permanently erases all data including even protected images.
Page of 40
Display

Click on the first or last page to see other DSC-H400 service manuals if exist.