Sony DSC-H400 Service Manual ▷ View online
DSC-H400
1-6
1-1-5. Top Cover Section
ns: not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
201
A-2045-580-A
BASE ASSY, FLASH
202
X-2589-731-1 BASE ASSY, RL DIAL
203
X-2589-727-1 COVER
ASSY,
TOP
204
A-2045-573-A BLOCK ASSY, RL FPC
205
A-2045-574-A ST
BOARD
ASSY
206
A-2045-577-A FPC ASSY, ST CONNECTION
#S6
4-537-615-01
TAPPING M1.4 2.5 SVR AV
#S7
4-537-616-01
TAPPING M1.7 3.5 SVR AV
#S6
#S6
#S7
#S7
#S6
201
202
203
205
206
204
DSC-H400
1-7
1-2. FUSE
F1
5.0V
5.0V
F2 3.6V
MAIN BOARD (SIDE A)
MAIN BOARD (SIDE B)
Primary side
Ref. No.
Part No.
Description
F1
1-576-415-11
FUSE (2A/32V)
F2
1-576-415-11
FUSE (2A/32V)
DSC-H400
1-8
1-3. ACCESSORIES
901
902
903
904
905
906
907
Ref. No.
Part No.
Description
901
1-489-282-12
AC Adaptor AC-UB10C (BR)
*901 1-489-282-31
AC
Adaptor
AC-UB10C
(CH)
901
1-490-429-21
AC Adaptor AC-UB10C (US, CND)
901
1-490-429-61
AC Adaptor AC-UB10C (AEP, UK, RU, E)
902
1-837-427-11
Power cord (mains lead) (AEP, RU, E (EXCEPT Saudi))
902
1-837-801-12
Power cord (mains lead) (BR)
902
1-837-835-21
Power cord (mains lead) (UK, E (Saudi))
903
1-785-504-21
Conversion (2P) Adaptor (E33)
904
1-837-783-31
Dedicated USB cable
905
4-167-334-31 Shoulder
strap
906
X-2589-725-1 Lens
cap
* 907
4-533-868-11
Instruction Manual (ENGLISH)
* 907
4-533-868-21
Instruction Manual (ENGLISH, SPANISH)
* 907
4-533-868-31
Instruction Manual (ENGLISH, FRENCH)
* 907
4-533-868-41
Instruction Manual (ENGLISH, INDONESIAN)
Ref. No.
Part No.
Description
* 907
4-533-868-51
Instruction Manual (SPANISH, BRAZILIAN
PORTUGUESE)
* 907
4-533-868-61
Instruction Manual (TRADITIONAL CHINESE,
SIMPLIFIED CHINESE)
* 907
4-533-868-71
Instruction Manual (RUSSIAN, UKRAINIAN)
* 907
4-533-868-81
Instruction Manual (SIMPLIFIED CHINESE)
* 907
4-533-869-11
Instruction Manual (FRENCH, ITALIAN)
* 907
4-533-869-21
Instruction Manual (SPANISH, PORTUGUESE)
* 907
4-533-869-31
Instruction Manual (GERMAN, DUTCH)
* 907
4-533-869-41
Instruction Manual (CZECH, HUNGARIAN)
* 907
4-533-869-51
Instruction Manual (DANISH, SWEDISH)
* 907
4-533-869-61
Instruction Manual (SLOVAK, POLISH)
* 907
4-533-869-71
Instruction Manual (FINNISH, NORWEGIAN)
* 907
4-533-869-81
Instruction Manual (ARABIC, PERSIAN)
* 907
4-533-869-91
Instruction Manual (THAI, TURKISH)
Note 1: Dedicated A/V cable (optional accessory)
Dedicated A/V cable is not supplied with this model.
If you need dedicated A/V cable, order 1-834-312-4[] or
VMC-15CSR1.
VMC-15CSR1.
Ref. No. Part No.
Description
8-022-359-31
Rechargeable battery pack NP-BX1/UC (US, CND)
8-022-359-50
Rechargeable battery pack NP-BX1/CE (EXCEPT US, CND, CH)
8-022-359-71
Rechargeable battery pack NP-BX1/CN (CH)
DSC-H400
2-1
2-1. NOTES FOR FLEXIBLE BOARD
Make sure that the conductive side of a flexible board does not have any stain or foreign materials.
Do not touch the conductive side of flexible boards with bare hands.
Plug in a flexible board straight, fully into the connector until it reaches the end inside. (Fig. 1, Fig. 2, Fig. 3)
Do not touch the conductive side of flexible boards with bare hands.
Plug in a flexible board straight, fully into the connector until it reaches the end inside. (Fig. 1, Fig. 2, Fig. 3)
OK
(The flexible board was plugged in straight
and completely)
and completely)
NG
(The flexible board was plugged in
crooked.)
crooked.)
NG
(The flexible board was not plugged in
completely.)
completely.)
Flexible
Board
Flexible
Board
Board
Connector
Connector
Reference line
Flexible
Board
Board
Connector
Connector
Flexible
Board
Reference line
Connector
Connector
Flexible
Board
Board
Flexible
Board
Reference line
Fig. 1
Fig. 2
Fig. 3
When opening the connector's holder in direction A, do not open
it with excessive force.
it with excessive force.
When closing the connector's holder, press it evenly while pushing
a flexible board in direction B.
a flexible board in direction B.
Holder
Connector
Flexible Board
A
A
Holder
Insulation side
Connector
Flexible Board
B
• Make sure that the flat cable and flexible board are not cracked
or bent at the contact end.
• Do not apply excessive force to the gilded flexible board.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
• The proper way to disconnect a connector is to grab the con-
nector instead of the wires. If you pull on the wires, they might
be broken.
be broken.
• The proper way to connect a connector is to grab the connector
instead of the wires. If you push on the wires, they might be
broken.
broken.
2. SERVICE NOTE
2-2. DISCHARGING OF THE FLASH CAPACITOR
The charging capacitor for the flash has been charged at high voltage.
Therefore, there is a possibility of an electric shock if you directly handle this capacitor.
The high-voltage charge will not be discharged by simply turning off the unit’s power.
Make sure any remaining voltage is discharged by short-circuiting the flash capacitor with a Short Jig.
Therefore, there is a possibility of an electric shock if you directly handle this capacitor.
The high-voltage charge will not be discharged by simply turning off the unit’s power.
Make sure any remaining voltage is discharged by short-circuiting the flash capacitor with a Short Jig.
Preparing the Short Jig
Make a Short Jig by connecting a small clip to each lead of a resistor with a rated value of approximately 1 kΩ /1 W.
In order to prevent an electric shock, wrap insulating tape completely around the resistor and its leads.
In order to prevent an electric shock, wrap insulating tape completely around the resistor and its leads.
Resistor with a rated value of approximately
1 k
1 k
Ω/1 W (Part No. 1-215-869-11).
Wrap insulating tape completely
around the resistor and its leads.
around the resistor and its leads.
Small clip
Small clip
Click on the first or last page to see other DSC-H400 service manuals if exist.