Sony DSC-H400 Service Manual ▷ View online
DSC-H400
4-16
4-3-11. Lens Option
Lens Option Setting order is as follows.
1) Check that the camera is on the adjustment mode.
Note:
For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
2) Press the Control button “ b ” “ B ” and “ v ” “ V ”to change selected item. Choose “Lens Option”,
press the “
(Playback)” button to choose item.
Note:
If the setting is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the setting. (Page 4-3)
3) Press the Control button “ V ” to “Enable LDC” item after press the Control button “ B ” to set enable (00001).
Press the Control button “ V ” to “Enable LSC” item after press the Control button “ B ” to set enable (00001).
Press the Control button “ V ” to “Enable OIS” item after press the Control button “ z ” to set enable (00001).
Final Press the “
(Playback)” button to return to adjustment mode, then press the Control button “ z ”,
select “OK” and press the Control button “ z ” to start.
Note:
LDC : Lens Distortion Correction
LSC : Lens Shading Correction
OIS : Optical Image Stabilizer
4) Confirm the indication on the screen.
When the setting is finished, the setting completion indication appears on the screen. (Fig. 4-3-30)
Press the “
(Playback)” button to return to adjustment menu.
LDC
ON
LSC
ON
OIS
ON
Fig.
4-3-30
DSC-H400
4-17
4-3-12. Set Language Destination
Note:
Finish all of the adjustment except for the Language Destination setting.
Once the Language Destination setting is finished, it cannot be reset.
Once the Language Destination setting is finished, it cannot be reset.
USB Driver and Service Tool
Put the two folders “USB Driver” and “Service Tool” downloaded in “4-1-5. Setting the Adjustment Mode” (Page 4-3) in any place of the PC.
Confirm that the “USB Driver” folder includes the following items.
Select the USB driver for operation software of the PC.
Confirm that the “USB Driver” folder includes the following items.
Select the USB driver for operation software of the PC.
• USB_driver_win_32bit_DSCA
(Folder)
• USB_driver_win7_64bit_DSCA
(Folder)
The procedure of installing a USB Driver is as follows.
1) Connect the camera started up with the Adjustment mode, and the PC with a Dedicated USB Cable.
2) Install the USB Driver according to the guidance on the screen.
Connecting USB to PC
Connect the equipment as shown below. (Fig. 4-3-31)
Dedicated USB Cable
Personal Computer
1 To a USB jack of the PC
2 To the
(USB)/A/V OUT
jack
(USB)/A/V OUT
jack
Fig.
4-3-31
Starting up the Service Tool
Double click the “ServiceTool_Ver[][][].exe” in the “Service Tool” folder to start up the Service Tool. (Fig. 4-3-32)
Fig.
4-3-32
DSC-H400
4-18
The setting is finished normally.
Fig. 4-3-33
The setting is complete.
Screen display
The setting is finished abnormally.
Fig. 4-3-34
Malfunction of Set
Language Destination
result
Language Destination
result
Example:
Please Plug in
USB!
Fig. 4-3-35
Malfunction of Set
Language Destination
result
Language Destination
result
Example:
Serial No.
Length ERROR
Setting order
The Language Destination setting order is as follows.
Confirm the indication
on the screen.
Press the “Read” button, “PRODUCT CODE” and “SERIAL No.” will displayed on the screen.
Select the correspond language destination from the pull-down menu, input the “SERIAL No.”, then press the “Write” button.
*1 The “SERIAL No.” is written on the bottom of the camera.
Select the correspond language destination from the pull-down menu, input the “SERIAL No.”, then press the “Write” button.
*1 The “SERIAL No.” is written on the bottom of the camera.
*2 Once the Language Destination setting is finished, it cannot be reset.
The camera restarts and switches to the Mass
Storage connection automatically.
Storage connection automatically.
Disconnect the camera from the dedicated USB
cable and perform the initial setting.
cable and perform the initial setting.
In case of the setting is finished normally,
the setting completion indication appears on
the screen. (Fig. 4-3-33)
the setting completion indication appears on
the screen. (Fig. 4-3-33)
In case of the setting is finished abnormally,
the following message appears on the screen.
(Fig. 4-3-34, 4-3-35)
In this case, perform the setting again upon
the message.
the following message appears on the screen.
(Fig. 4-3-34, 4-3-35)
In this case, perform the setting again upon
the message.
Finished abnormally.
Finished normally.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
DSC-H400
4-19
Selectable language table
Destination
AREA
SELECTABLE LANGUAGE
VIDEO OUT
Default
English
French
German
Spanish
Italian
Portuguese
Dutch
Russian
Swedish
Norwegian
Danish
Finnish
Polish
Czech
Hungarian
T
raditional Chinese
Simplified Chinese
Korean
Persian
Arabic
Thai
T
urkish
Greek
Croatian
Romanian
Bulgarian
V
ietnamese
Brazilian Portuguese
Indonesia
Ukrainian
Malay
U2
US
z
a
a
a
NTSC
CA2 Canadian z a
a
a
a
NTSC
E33
E
a
a
z
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
BR4 Brazilian
a
a
a
a
a
a
a
a
a
a
a
a
z
a
a
NTSC
CE3
AEP
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
CEH
UK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
E32
E
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
E37
E
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
EA8
E
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
RU3
Russian
a
a
a
a
a
a
a
z
a
a
a
a
a
a
a
a
a
a
a
a
NTSC
CN2
Chinese
a
a
a
a
a
z
a
a
a
a
a
a
a
a
a
NTSC
z
: INITIAL LANGUAGE
Click on the first or last page to see other DSC-H400 service manuals if exist.