Sony DSC-H400 Service Manual ▷ View online
DSC-H400
4-11
4-3-7. MeShut80 Adjustment
The MeShut80 (Mechanical Shutter 80) Adjustment order is as fol-
lows.
lows.
Note:
Perform the MeShut80 Adjustment after those performed in 4-3-4 to 4-3-6.
Perform the MeShut80 Adjustment after those performed in 4-3-4 to 4-3-6.
Small pattern box (PTB-1450) setting:
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
Limit:420 480
CAPNUM :
DRAFT_G:
Iris No:
STILL_G:
MainDly:
SubDly :
MainDly:
SubDly :
52
55
55
477
1068
4
1
1
Time:23747
482 480 478
OK
FINISH..
.
Fig. 4-3-18
The adjustment is complete.
The adjustment is finished abnormally.
...Iris or LV NG
CAPNUM :
DRAFT_G:
Iris No:
STILL_G:
MainDly:
SubDly :
MainDly:
SubDly :
66
0
Time:11638
482 478 476
Calib Er
..
NG
Fig. 4-3-19
Malfunction of MeShut80
adjustment result
adjustment result
Adjustment order
Screen display
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 4-3-19)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 4-3-19)
In this case, confirm the adjusting environment
and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “MeShut80 (LV14)”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 4-3-18)
Press the “ (Playback)” button to return to
adjustment menu.
the adjustment completion indication appears
on the screen. (Fig. 4-3-18)
Press the “ (Playback)” button to return to
adjustment menu.
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 4-3-17)
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Equipment required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450)
Small pattern box (PTB-1450)
(All black)
Clear chart
Small pattern box
(PTB-1450)
(PTB-1450)
5 mm or less (Tele end)
Black cloth
Camera
Fig. 4-3-17
DSC-H400
4-12
Adjustment order
Screen display
4-3-8. Dark DP Adjustment
The Dark DP (Dead Pixel) Adjustment order is as follows.
Note:
Perform the Dark DP Adjustment after those performed in 4-3-4 to 4-3-7.
Perform the Dark DP Adjustment after those performed in 4-3-4 to 4-3-7.
Small pattern box (PTB-1450) setting:
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
Cap Raw ...
Time(Sec)
DARK DPC
Threshold:
Find DP NUM
Find DP NUM
1
13
512
1
OK
FINISH....
+
Fig. 4-3-21
The adjustment is complete.
The adjustment is finished abnormally.
Cap Raw ...
Threshold :
Find DP NUM
Time (Sec)
DARK DPC
602
99
41
1
FINISH ....
NG
Fig. 4-3-22
Malfunction of Dark DP
adjustment result
adjustment result
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 4-3-22)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 4-3-22)
In this case, confirm the adjusting environment
and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “Dark DPC (LV10)”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 4-3-21)
Press the “ (Playback)” button to return to
adjustment menu.
the adjustment completion indication appears
on the screen. (Fig. 4-3-21)
Press the “ (Playback)” button to return to
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 4-3-20)
Equipment required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450)
Small pattern box (PTB-1450)
(All black)
Clear chart
Small pattern box
(PTB-1450)
(PTB-1450)
5 mm or less (Tele end)
Black cloth
Camera
Fig. 4-3-20
DSC-H400
4-13
Adjustment order
Screen display
4-3-9. Light/S.S Adjustment
The Light/S.S (Light Dead Pixel/Slow Shutter Dead Pixel)
Adjustment order is as follows.
Adjustment order is as follows.
Note:
Perform the Light/S.S Adjustment after those performed in 4-3-4 to 4-3-8.
Perform the Light/S.S Adjustment after those performed in 4-3-4 to 4-3-8.
The adjustment is finished normally.
OK
Fig.
4-3-25
The adjustment is complete.
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the indication other than that shown in
Fig. 4-3-25 appears on the screen, confirm the
adjusting environment and readjust.
Fig. 4-3-25 appears on the screen, confirm the
adjusting environment and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “Light S.S (BLACK)”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
*1 If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
*2 It takes approximately 15 minutes or more on this adjustment.
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
*1 If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
*2 It takes approximately 15 minutes or more on this adjustment.
In case of the adjustment
is finished normally, the
adjustment completion
indication appears on the
screen. (Fig. 4-3-25)
* The Self-timer lamp
lights up. (Fig. 4-3-24)
is finished normally, the
adjustment completion
indication appears on the
screen. (Fig. 4-3-25)
* The Self-timer lamp
lights up. (Fig. 4-3-24)
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Press the flash unit pop-up button to raise the flash.
Cover camera lens (All black) (Fig. 4-3-23)
Cover camera lens (All black) (Fig. 4-3-23)
Restart the camera.
Fig. 4-3-24
Self-timer lamp
Camera
Equipment required: Cover camera lens
(All black)
Black cloth
Fig. 4-3-23
DSC-H400
4-14
4-3-10. Flash WB Adjustment
Preparing the Flash Adjustment Box
A dark room is required to provide an accurate flash adjustment. If it is not available, prepare the flash adjustment box as shown below.
1) Provide woody board A, B, C and D of 15 mm thickness. (Fig. 4-3-26)
2) Apply black mat paint to one side of woody board A, B and D.
3) Attach background paper (J-2501-130-A) to woody board C.
4) Assemble so that the black sides and the background paper side of woody board A, B, C and D are internal. (Fig. 4-3-27)
Woody board A
Woody board B
Woody board B
Woody board C
Woody board A
Woody board D
Front of the lens
L = 500 mm
L
Camera
Woody board A (2)
400 mm
Woody board B (2)
370 mm
Woody board C (1)
700 mm
513 mm
513 mm
700 mm
Woody board D (1)
370 mm
370 mm
700 mm
730 mm
100 mm
120 mm
Fig.
4-3-26
Fig. 4-3-27
Click on the first or last page to see other DSC-H400 service manuals if exist.