DOWNLOAD Sony DSC-H400 Service Manual ↓ Size: 2.3 MB | Pages: 40 in PDF or view online for FREE

Model
DSC-H400
Pages
40
Size
2.3 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
dsc-h400.pdf
Date

Sony DSC-H400 Service Manual ▷ View online

DSC-H400
4-6
4-3-2. Setting OIS Check Flag
Perform the this operation additionally when replacing Main board or Lens.
Preparations: 
 
Put the folder “Set_OIS Flag” downloaded in “4-1-5. Setting the Adjustment Mode” (Page 4-3) on any place of the PC.
 
Confirm that includes the following items.
• Set_OISFlag_v[][][].exe
• UI43Api.dll
 
The USB Driver is same as “4-3-12. Set Language Destination”.  (Page 4-17)
Procedure:
1)  Check that the camera is on the adjustment mode.
 
Connect the camera and the PC. 
2)  Double click the “Set_OISFlag_v[][][].exe” to start up the writing tool. (Fig. 4-3-4)
 
 Fig. 
4-3-4
3)  Click the “Set Flag ” button. 
4)  In case of the setting is finished normally, the setting completion indication appears on the screen. (Fig. 4-3-5)
 
The power of the camera turns off automatically.
 
 Fig. 
4-3-5
DSC-H400
4-7
4-3-3. Focus Adjustment
The Focus Adjustment order is as follows.
Note: 
When using the Flange back adjustment jig, take care of the following points:
•  For the illumination, use a light source such as an incandescent lamp or inverter type fluorescent light free from flickering.
•  Do not make an adjustment in the environment where fluorescent lamp flickering occurs even if the illuminance can be ensured with the room illumination only.
•  Use an incandescent lamp or inverter type fluorescent light at a place free from the influence of room illumination.
1)  Install the Flange back adjustment jig so that the distance between 
it and the front of lens of camera is 10 mm or less (Tele end).
Note:
Take care not to hit the Flange back adjustment jig when extending the lens.
2)  Make the height of Flange back adjustment jig and the camera equal.
3)  Check that the center of chart meets the center of shot image screen.
Illuminance = 1000 ± 200 lx
Adjustment order
Screen display
The adjustment is finished normally.
******
IN FOCUS
******
0,0,609
1,1,610
2,1,614
3,0,612
4,1,613
5,0,614
6,0,617
7,1,618
8,-1,621
9,0,620
10,3,622
11,0,622
12,1,622
13,-1,619
14,2,620
15,-1,620
16,1,619
17,-1,619
18,1,619
20,2,616
21,1,616
22,-1,613
23,2,614
24,-1,614
25,2,613
26,0,616
27,1,618
28,0,623
19,-1,6
Getsum 0x81
OK
Fig. 4-3-7
The adjustment is complete.
The adjustment is finished abnormally.
******
INF FOCUS
******
Cali Er
NG
0,0,642
1,1,656
2,0,666
3,0,679
5,0,717
4,0,000
Big&Small Search Diff ..
Fig. 4-3-8
Malfunction of Focus 
adjustment result
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Place the camera in front of the Flange back adjustment jig. (Fig. 4-3-6)
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 4-3-8)
In this case, confirm the adjusting environment
and readjust. 
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “FOCUS (Infinity)”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
In case of the adjustment is finished normally, 
the adjustment completion indication appears 
on the screen. (Fig. 4-3-7)
Press the “      (Playback)” button to return to 
adjustment menu.
Finished normally.
Finished abnormally.
Confirm the indication
on the screen.
Flange back adjustment jig
10 mm or less (Tele end)
Camera
Equipment required: Flange back adjustment jig
Fig. 4-3-6
DSC-H400
4-8
The adjustment is finished normally.
OB VAL:
R OFFS:
G OFFS:
B OFFS:
0x07a8
0x07a9
0x07aa
Limit:4 3840
Time:2426
FINISH
T
OK
Fig. 4-3-10
The adjustment is complete.
Adjustment order
Screen display
4-3-4. OB Adjustment
The OB (Optically Black) Adjustment order is as follows.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Cover camera lens (All black). (Fig. 4-3-9)
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “OB CLBT (BLACK)”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
In case of the adjustment is finished normally, 
the adjustment completion indication appears 
on the screen. (Fig. 4-3-10)
Press the “      (Playback)” button to return to 
adjustment menu.
Finished normally.
Finished abnormally.
In case of the indication other than that shown in 
Fig. 4-3-10 appears on the screen, confirm the 
adjusting environment and readjust.
Confirm the indication
on the screen.
Camera
Equipment required: Cover camera lens
(All black)
Black cloth
Fig. 4-3-9
DSC-H400
4-9
Adjustment order
Screen display
Setting Light Src value.
4-3-5. WB/AGC Adjustment
The WB/AGC (White Balance/Analog Gain Control) Adjustment 
order is as follows.
Small pattern box (PTB-1450) setting: 
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
LimitR:312 579
LimitB:338 628
MEAN G
DayLig
R Gain
G Gain
B Gain
25854
32018
25610
75923
Time:16585
Move OK...
OK
Fig. 4-3-13
The adjustment is complete.
The adjustment is finished abnormally.
LimitR:312 579
LimitB:338 628
MEAN G
DayLig
R Gain
G Gain
B Gain
26006
340
256
698
Time:26383
Move OK...
NG
Fig. 4-3-14
Malfunction of WB/AGC  
adjustment result
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “4-1-5. Setting the Adjustment Mode” (Page 4-3).
Confirm the indication
on the screen.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 4-3-14)
In this case, confirm the adjusting environment
and readjust. 
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “WB/AGC (LV10)”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “4-1-6. Enabling the Adjustment” to enable the adjustment. (Page 4-3)
In case of the adjustment is finished normally, 
the adjustment completion indication appears 
on the screen. (Fig. 4-3-13)
Press the “      (Playback)” button to return to 
adjustment menu.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item to “WB/AGC (LV10)”, 
and press the “       (Playback)” button. Press the Control button “ v ” “ V ” to change selected item 
to “Light Src”, and press the Control button “ b ” “ B ” to set the value as “00002”, and press the 
Control button “ z ”. (Fig. 4-3-12)
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 4-3-11)
Finished normally.
Finished abnormally.
Equipment required:  Small pattern box (PTB-1450)
Cover camera lens and 
Small pattern box (PTB-1450) (All black)
Clear chart
Small pattern box 
(PTB-1450)
5 mm or less (Wide end)
Black cloth
Camera
Fig. 4-3-11
Disable
00001
LightSrc
00002
P1RRatio
01078
P1BRatio
01031
P2RRatio
01478
P2BRatio
00635
Fig. 4-3-12
Page of 40
Display

Click on the first or last page to see other DSC-H400 service manuals if exist.