DOWNLOAD Sony DSC-H300 (serv.man2) Service Manual ↓ Size: 298.85 KB | Pages: 11 in PDF or view online for FREE

Model
DSC-H300 (serv.man2)
Pages
11
Size
298.85 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / ADJUSTMENT MANUAL
File
dsc-h300-sm2.pdf
Date

Sony DSC-H300 (serv.man2) Service Manual ▷ View online

DSC-H300_ADJ
5-6
Adjustment order
Screen display
Setting Light Src value.
5-3-5. WB/AGC Adjustment
The WB/AGC (White Balance/Analog Gain Control) Adjustment order 
is as follows.
Small pattern box (PTB-1450) setting: 
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
LimitR:312 579
LimitB:338 628
MEAN G
DayLig
R Gain
G Gain
B Gain
25854
32018
25610
75923
Time:16585
Move OK...
OK
Fig. 5-3-13
The adjustment is complete.
The adjustment is finished abnormally.
Limit:234 276
49 8, 191
ZPos :
WLuma:
LS:-1 3:
OC:
63
OC :
Entry :
Gain :
AGC :
0x002e
0x0101
OK
NG
Cali Er
T
Fig. 5-3-14
Malfunction of WB/AGC  
adjustment result
5-3-6. MeShut26 Adjustment
The MeShut26 (Mechanical Shutter 26) Adjustment order is as follows.
Note:
Perform the MeShut26 Adjustment after those performed in 5-3-4 to 5-3-5.
Small pattern box (PTB-1450) setting: 
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
Iris No:
1
Time:605
OK
FINISH...
Fig. 5-3-16
The adjustment is complete.
Adjustment order
Screen display
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Confirm the indication
on the screen.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-14)
In this case, confirm the adjusting environment
and readjust. 
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “WB/AGC (LV10)”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally, 
the adjustment completion indication appears 
on the screen. (Fig. 5-3-13)
Press the “      (Playback)” button to return to 
adjustment menu.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item to “WB/AGC (LV10)”, 
and press the “       (Playback)” button. Press the Control button “ v ” “ V ” to change selected item 
to “Light Src”, and press the Control button “ b ” “ B ” to set the value as “00002”, and press the 
Control button “ z ”. (Fig. 5-3-12)
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-3-11)
Finished normally.
Finished abnormally.
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the indication other than that shown in
Fig. 5-3-16 appears on the screen, confirm the
adjusting environment and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “MeShut26 (LV13)”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally, 
the adjustment completion indication appears 
on the screen. (Fig. 5-3-16)
Press the “      (Playback)” button to return to 
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-3-15)
Equipment required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450)
(All black)
Clear chart
Small pattern box
(PTB-1450)
5 mm or less (Tele end)
Black cloth
Camera
Fig. 5-3-11
Equipment required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450)
(All black)
Clear chart
Small pattern box
(PTB-1450)
5 mm or less (Tele end)
Black cloth
Camera
Fig. 5-3-15
Disable
00001
LightSrc
00002
P1RRatio
01078
P1BRatio
01031
P2RRatio
01458
P2BRatio
00619
Fig. 5-3-12
DSC-H300_ADJ
5-7
5-3-7. MeShut80 Adjustment
The MeShut80 (Mechanical Shutter 80) Adjustment order is as follows.
Note:
Perform the MeShut80 Adjustment after those performed in 5-3-4 to 5-3-6.
Small pattern box (PTB-1450) setting: 
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
Limit:550 678
CAPNUM :
DRAFT_G:
Iris No:
STILL_G:
MainDly:
SubDly :
79
76
622
442
2
2
Time:14958
OK
FINISH..
.
Fig. 5-3-18
The adjustment is complete.
The adjustment is finished abnormally.
...Iris or LV NG
CAPNUM :
DRAFT_G:
Iris No:
STILL_G:
MainDly:
SubDly :
2
2
Time:686
Calib Er 
..
NG
Fig. 5-3-19
Malfunction of MeShut80 
adjustment result
Adjustment order
Screen display
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-19)
In this case, confirm the adjusting environment
and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “MeShut80 (LV14)”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally, 
the adjustment completion indication appears 
on the screen. (Fig. 5-3-18)
Press the “      (Playback)” button to return to 
adjustment menu.
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-3-17)
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Equipment required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450)
(All black)
Clear chart
Small pattern box
(PTB-1450)
5 mm or less (Tele end)
Black cloth
Camera
Fig. 5-3-17
Adjustment order
Screen display
5-3-8. Dark DP Adjustment
The Dark DP (Dead Pixel) Adjustment order is as follows.
Note:
Perform the Dark DP Adjustment after those performed in 5-3-4 to 5-3-7.
Small pattern box (PTB-1450) setting: 
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
Cap Raw  ...
Threshold :
Find DP NUM
Time (Sec)
DARK DPC
512
4
13
1
FINISH  ....
OK
Fig. 5-3-21
The adjustment is complete.
The adjustment is finished abnormally.
Cap Raw  ...
Threshold :
Find DP NUM
Time (Sec)
DARK DPC
602
99
41
1
FINISH  ....
NG
Fig. 5-3-22
Malfunction of Dark DP 
adjustment result
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally, 
the following indication appears on the screen.
(Fig. 5-3-22)
In this case, confirm the adjusting environment
and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “Dark DPC (LV10)”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears 
on the screen. (Fig. 5-3-21)
Press the “      (Playback)” button to return to 
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-3-20)
Equipment required: Small pattern box (PTB-1450)
Cover camera lens and
Small pattern box (PTB-1450)
(All black)
Clear chart
Small pattern box
(PTB-1450)
5 mm or less (Tele end)
Black cloth
Camera
Fig. 5-3-20
DSC-H300_ADJ
5-8
Adjustment order
Screen display
5-3-9. Light/S.S Adjustment
The Light/S.S (Light Dead Pixel/Slow Shutter Dead Pixel)
Adjustment order is as follows.
Note:
Perform the Light/S.S Adjustment after those performed in 5-3-4 to 5-3-8.
The adjustment is finished normally.
OK
 Fig. 
5-3-25
The adjustment is complete.
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the indication other than that shown in
Fig. 5-3-25 appears on the screen, confirm the
adjusting environment and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “Light S.S (BLACK)”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
*1 If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
*2 It takes approximately 15 minutes or more on this adjustment.
In case of the adjustment
is finished normally, the
adjustment completion
indication appears on the
screen. (Fig. 5-3-25)
* The Self-timer lamp
lights up. (Fig. 5-3-24)
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Cover camera lens (All black) (Fig. 5-3-23)
Restart the camera.
Fig. 5-3-24
Self-timer lamp
Camera
Equipment required: Cover camera lens
(All black)
Black cloth
Fig. 5-3-23
5-3-10. Flash WB Adjustment
Preparing the Flash Adjustment Box
A dark room is required to provide an accurate flash adjustment. If it is not available, prepare the flash adjustment box as shown below.
1)  Provide woody board A, B, C and D of 15 mm thickness.
2)  Apply black mat paint to one side of woody board A, B and D.
3)  Attach background paper (J-2501-130-A) to woody board C.
4)  Assemble so that the black sides and the background paper side of woody board A, B, C and D are internal. (Fig. 5-3-27)
Woody board A
Woody board B
Woody board B
Woody board C
Woody board A
Woody board D
Front of the lens
L = 500 mm
L
Camera
              
Woody board A (2)
400 mm
Woody board B (2)
370 mm
Woody board C (1)
700 mm
513 mm
513 mm
700 mm
Woody board D (1)
370 mm
370 mm
700 mm
730 mm
100 mm
120 mm
 Fig. 
5-3-26
Fig. 5-3-27
DSC-H300_ADJ
5-9
Adjustment order
Screen display
The adjustment is finished normally.
Success
OK
Angle:3.3 deg.
AF Luma:1119
Fig. 5-3-28
The adjustment is complete.
The adjustment is finished abnormally.
Success
NG
Angle:7.0 deg.
AF Luma:2269
Fig. 5-3-29
Malfunction of Flash WB 
adjustment
The Flash WB Adjustment order is as follows.
Note:
Perform the Flash WB Adjustment after those performed in 5-3-4 to 5-3-9.
Confirm the indication
on the screen.
In case of the adjustment is finished abnormally,
the following indication appears on the screen. 
(Fig. 5-3-29) 
In this case, confirm the adjusting environment 
and readjust.
n
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “FLASH WB”, 
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally, 
the adjustment completion indication appears 
on the screen. (Fig. 5-3-28)
Press the “      (Playback)” button to return to 
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Flash Adjustment Box. (Fig. 5-3-27)
Finished normally.
Finished abnormally.
5-3-11. Lens Option
Lens Option Setting order is as follows.
1)  Check that the camera is on the adjustment mode.
 Note:
 
For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
2)  Press the Control button “ b ” “ B ” and “ v ” “ V ”to change selected item. Choose “Lens Option”, 
 
press the “ 
 (Playback)” button to choose item.
 
Note:
 
If the setting is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the setting. (Page 5-3)
3)  Press the Control button “ V ” to “Enable LDC” item after press the Control button “ B ” to set enable (00001). 
Press the Control button “ V ” to “Enable LSC” item after press the Control button “ B ” to set enable (00001). 
Press the Control button “ V ” to “Enable OIS” item after press the Control button “ z ” to set enable (00002).
 
Final Press the “ 
 (Playback)” button to return to adjustment mode, then press the Control button “ z ”, 
 
select “OK” and press the Control button “ z ” to start.
 
Note:
 
LDC : Lens Distortion Correction
 
LSC : Lens Shading Correction
 
OIS  : Optical Image Stabilizer
4)  Confirm the indication on the screen.
When the setting is finished, the setting completion indication appears on the screen. (Fig. 5-3-30)
Press the “ 
 (Playback)” button to return to adjustment menu.
 
LDC
ON
LSC
ON
OIS
ON
 Fig. 
5-3-30
Page of 11
Display

Click on the first or last page to see other DSC-H300 (serv.man2) service manuals if exist.