Sony DSC-H3 (serv.man5) Service Manual ▷ View online
SERVICE MANUAL
LEVEL
2
Ver. 1.1 2007.10
Sony EMCS Co.
9-852-211-81
2007J0500-1
© 2007.10
Published by Kohda TEC
SUPPLEMENT-1
File this supplement with the service manual.
(DI07-203)
• Addition of Angular Velocity Sensor (Type M)
DSC-H3_L2
DSC-H3
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
Japanese Model
Tourist Model
• Along with Type S, Type M is added at type of angular velocity sensor.
• As for the suffix No. of SY-185 board, 21 (Type M) in addition to 11 (Type S) has been added.
• As for the suffix No. of SY-185 board, 21 (Type M) in addition to 11 (Type S) has been added.
• When the machine needs to be repaired, please refer to page 2 or 3 to discriminate the type of angular
velocity sensor.
— 2 —
DSC-H3_L2
1-6. ANGULAR VELOCITY SENSOR TYPE CHECK
As for the angular velocity sensor of this set, Type M (SE501, SE502) in addition to Type S (SE501) was added.
Along with this addition, as for the SY-185 board, suffix: -21 (Type M) in addition to suffix: -11 (Type S) is added.
Along with this addition, as for the SY-185 board, suffix: -21 (Type M) in addition to suffix: -11 (Type S) is added.
1. SERVICE NOTE
ENGLISH
JAPANESE
ENGLISH
JAPANESE
SE502
(PITCH)
SE501
(YAW)
(YAW)
SE501
(PITCH/YAW)
SY-185 BOARD (SIDE A)
Type S (Suffix: -11)
Type M (Suffix: -21)
IC503
•
Checking Method of Angular Velocity Sensor by Mount Parts
•
Checking Method of Angular Velocity Sensor by Data Value
Checking method:
1) Connect the camera and PC with USB cable, and switch the driver from “USB Mass Storage Device” to “Sony Seus USB Driver”.
2) Start SeusEX and click [Connect] button.
3) Enter the Block, Page, and Address given below to check the data value.
1) Connect the camera and PC with USB cable, and switch the driver from “USB Mass Storage Device” to “Sony Seus USB Driver”.
2) Start SeusEX and click [Connect] button.
3) Enter the Block, Page, and Address given below to check the data value.
Block
Page
Address
Data
Type S
Type M
11
71
0585
00
01
4) After checking the data value, click [Disconnect] button to release the connection.
— 3 —
DSC-H3_L2
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1. SERVICE NOTE
1-6. 角速度センサタイプチェック
本機の角速度センサはSタイプ
(SE501)
に加えてMタイプ
(SE501, SE502)
が追加されました。
それに伴ないSY-185基板は末尾:-11
(Sタイプ)
に加えて末尾:-21
(Mタイプ)
が追加されています。
SE502
(PITCH)
SE501
(YAW)
(YAW)
SE501
(PITCH/YAW)
SY-185基板(A面側)
Sタイプ(末尾:-11)
Mタイプ(末尾:-21)
IC503
• マウント部品による角速度センサ判別方法
• データ値による角速度センサ判別方法
確認方法:
1)カメラとPCをUSBケーブルで接続し,ドライバを
1)カメラとPCをUSBケーブルで接続し,ドライバを
“大容量記憶装置デバイス”
から
“Sony Seus USB Driver”
に切り替える。
2)SeusEXを起動し,[Connect]ボタンをクリックする。
3)下記のブロック,ページ,アドレスを入力し,データ値を確認する。
ブロック
ページ
アドレス
データ
Sタイプ
Mタイプ
11
71
0585
00
01
4)データ値を確認後,[Disconnect]ボタンをクリックし,接続を解除する。
— 4 —
DSC-H3_L2
(ENGLISH)
: Points changed portion.
Type S
1-2. SELF-DIAGNOSIS FUNCTION
1-2-3. Self-diagnosis Code Table
(Service manual page 1-2)
Type M
Sタイプ
Mタイプ
1-2. 自己診断機能
1-2-3. 自己診断コード表
(サービスマニュアル1-6ページ)
(JAPANESE)
:変更箇所
E
E
6
2
6
2
1
1
1
2
Lens overheating (PITCH).
Lens overheating (YAW).
Check the HALL element (PITCH) of optical image stabilizer
(pin 2, 3 of CN401 on the SY-185 board). If it is OK, check
PITCH angular velocity sensor (SE502 on the SY-185 board)
peripheral circuits.
(pin 2, 3 of CN401 on the SY-185 board). If it is OK, check
PITCH angular velocity sensor (SE502 on the SY-185 board)
peripheral circuits.
Check the HALL element (YAW) of optical image stabilizer (pin
6
6
, 7 of CN401 on the SY-185 board). If it is OK, check
YAW angular velocity sensor (SE501 on the SY-185 board)
peripheral circuits.
peripheral circuits.
E
E
6
2
6
2
1
1
1
2
Lens overheating (PITCH).
Lens overheating (YAW).
Check the HALL element (PITCH) of optical image stabilizer
(pin 2, 3 of CN401 on the SY-185 board). If it is OK, check
PITCH/YAW angular velocity sensor (SE501 on the SY-185
board) peripheral circuits.
(pin 2, 3 of CN401 on the SY-185 board). If it is OK, check
PITCH/YAW angular velocity sensor (SE501 on the SY-185
board) peripheral circuits.
Check the HALL element (YAW) of optical image stabilizer (pin
6
6
, 7 of CN401 on the SY-185 board). If it is OK, check
PITCH/YAW angular velocity sensor (SE501 on the SY-185
board) peripheral circuits.
board) peripheral circuits.
E
E
6
2
6
2
1
1
1
2
レンズオーバーヒート(PITCH)
レンズオーバーヒート(YAW)
光学手振れ補正ブロックのホール素子(PITCH)(SY-185
基板CN401 2,3ピン)を点検する。異常なければ
PITCH角速度センサ(SY-185基板SE502)周辺の回路を点
路を点検する。
光学手振れ補正ブロックのホール素子(YAW)(SY-185
基板CN401 6,7ピン)を点検する。異常なければ
YAW角速度センサ(SY-185基板SE501)周辺の回路を点
検する。
基板CN401 2,3ピン)を点検する。異常なければ
PITCH角速度センサ(SY-185基板SE502)周辺の回路を点
路を点検する。
光学手振れ補正ブロックのホール素子(YAW)(SY-185
基板CN401 6,7ピン)を点検する。異常なければ
YAW角速度センサ(SY-185基板SE501)周辺の回路を点
検する。
E
E
6
2
6
2
1
1
1
2
レンズオーバーヒート(PITCH)
レンズオーバーヒート(YAW)
光学手振れ補正ブロックのホール素子(PITCH)(SY-185
基板CN401 2,3ピン)を点検する。異常なければ
PITCH/YAW角速度センサ(SY-185基板SE501)周辺の回
路を点検する。
光学手振れ補正ブロックのホール素子(YAW)(SY-185
基板CN401 6,7ピン)を点検する。異常なければ
PITCH/YAW角速度センサ(SY-185基板SE501)周辺の回
路を点検する。
基板CN401 2,3ピン)を点検する。異常なければ
PITCH/YAW角速度センサ(SY-185基板SE501)周辺の回
路を点検する。
光学手振れ補正ブロックのホール素子(YAW)(SY-185
基板CN401 6,7ピン)を点検する。異常なければ
PITCH/YAW角速度センサ(SY-185基板SE501)周辺の回
路を点検する。
Display