DOWNLOAD Sony DSC-H10 (serv.man3) Service Manual ↓ Size: 822.47 KB | Pages: 40 in PDF or view online for FREE

6-36

DSC-H10_ADJ

In the AGING_MREC mode, motion pictures are continuously
recorded for the time (sec.) set to the “Rec Time” at the interval
(sec.) set to the “Rec Interval”.
At the start of AGING_MREC, the counter in the camera is ini-
tialized. This counter counts the number of recording times dur-
ing the execution of AGING_MREC, and it holds the counts
even during the power off.

1

[Preparation] button
Notes for aging is displayed.

2

Rec Time setting and display
The setting of recording time (sec.) is displayed. The setting
can be changed by entering a numeric value in this field.

3

Rec Interval setting and display
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.

4

[START] button
The AGING_MREC starts. In the AGING_MREC mode, the
aging starts immediately when the [START] button is clicked.
At the battery end, the AGING_MREC stops. To interrupt the
AGING_MREC, use the [STOP]  button, though the
AGING_MREC stops also by the power off or RESET button.

5

[STOP] button
The AGING_MREC stops.

6

[GET] button
After the AGING_MREC was executed, the number of record-
ing times is got from the counter in the camera. The result is
displayed in the “Count” display field.

7

Count display
The number of recording times got by the [GET] button is dis-
played.

In the AGING_PB mode, pictures are continuously played back at
the interval (sec.) set to the “Play Back Interval”.
At the start of AGING_PB, the counter in the camera is initial-
ized. This counter counts the number of play back times during
the execution of AGING_PB, and it holds the counts even during
the power off.

1

[Preparation] button
Notes for aging is displayed.

2

Play Back Interval setting and display
The setting of play back interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.

3

[START] button
The AGING_PB starts. In the AGING_PB mode, the aging
starts immediately when the [START] button is clicked.
At the battery end, the AGING_PB stops. To interrupt the
AGING_PB, use the [STOP] button, though the AGING_PB
stops also by the power off or RESET button.

4

[STOP] button
The AGING_PB stops.

5

[GET] button
After the AGING_PB was executed, the number of play back
times is got from the counter in the camera. The result is dis-
played in the “Count” display field.

6

Count display
The number of play back times got by the [GET]  button is
displayed.

6

4

5

1

7

2 3

5

3

4

1

6

2

6-37E

DSC-H10_ADJ

With the “DATA BACKUP”, the adjustment data in the camera
can be backed up in the PC as a file.
The adjustment data that can be backed up are as follows.

System Control Section:
1) Video System Adjustments
2) LCD System Adjustments

Camera Control Section:
1) Camera System Adjustments

Click the [DATA BACKUP] button on the Main Menu screen, and
the “DATA BACKUP” screen in Fig. 6-2-3 will appear.

1

[To Menu] button
Return to the main menu.

2

[Data Read and Save] button
Read the adjustment data from the camera and save them in
PC as a file.
Default file name is as follows:

3

[Data Load and Write] button
Load the adjustment data from the file saved in PC and write
them to the camera.

DSC-H10_ADJBAK_xxxxxxxx_yyyymmdd.dat

Date
USB serial number
Data name

1

2

3

DSC-H10_ADJ

1.0

1.1

1.2

1.3

2008.02

2008.05

2008.06

2008.06

Official Release

Revised-1
(A1 DI08-085)

Revised-2
(A2 DI08-134)

Revised-3
(A3 DI08-177)

—

Replacement of the previously issued SER-
VICE MANUAL 9-852-268-51 with this
Manual.
• Change of Automatic Adjustment Program

Version of Automatic Adjustment Program
has been changed from Ver_1.0r01 to
Ver_1.1r02.

• Addition of Thai Model
S.M. revised:

Replacement of the previously issued SER-
VICE MANUAL 9-852-268-52 with this
Manual.
• Change of Automatic Adjustment Program

Version of Automatic Adjustment Program
has been changed from Ver_1.1r02 to
Ver_1.2r03.

• Addition of the “Setting Distance between

Pattern Box and Camera”

• Addition of the “Precautions When Using

Pattern Box”

• Correction of the “Setting of Adjustment

Mode”

S.M. revised:

Replacement of the previously issued SER-
VICE MANUAL 9-852-268-53 with this
Manual.
• Correction of the “Setting of Adjustment

Mode”

S.M. revised:

– Continued on next page –

—

Yes

Yes

Yes

DSC-H10_ADJ

1.4

2009.04

Revised-4
(A4 09-010)

Replacement of the previously issued SER-
VICE MANUAL 9-852-268-54 with this
Manual.
• Change of  Automatic Adjustment Program

Version of Automatic Adjustment Program
has been changed from Ver_1.2r03 to
Ver_1.4r04.

• Automatic Adjustment Program

compatibility on Windows Vista

S.M. revised:

,

,

Yes