DOWNLOAD Sony DSC-H1 (serv.man4) Service Manual ↓ Size: 812.15 KB | Pages: 36 in PDF or view online for FREE

• Use this Service Manual together with the Automatic Adjustment Program (DSC-H1 Auto-Adj Ver_1.3r03.exe)

and the AWB Adjustment Program (H1AwbAdjustment.exe).

2007H0500-1

© 2007.8

DSC-H1

— 2 —

DSC-H1

Section

Title

Page

Before Starting Adjustment ······················································· 6-1
1-1.

Adjusting Items When Replacing
Main Parts and Boards ···················································· 6-3

6-1.

Camera Section Adjustments ··········································· 6-4

1-1.

Preparations Before Adjustments ···································· 6-4

1-2.

Adjustment Programs ······················································ 6-9

1-3.

Video System Adjustments ············································ 6-11

1-4.

Camera System Adjustments ········································· 6-13

1-5.

LCD System Adjustments ············································· 6-24

1-6.

EVF System Adjustments ·············································· 6-26

1-7.

Error ··············································································· 6-27

1-8.

Initialization of Data ······················································ 6-29

6-2.

Service Mode ································································· 6-30

6-1

DSC-H1

• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not

required.

• Perform “VIDEO OUT Default Data Check” mentioned below, and also the adjustment items necessary after SY

Board replacement.

When you replace to the repairing board, the written data of repairing board also might be changed to original setteing
because of broadcast system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code
is right. If not, rewrite to the right value.

Page

Address

Data

NTSC

PAL

4F

8D

00

01

4F

A2

00

01

Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click [Save] on the SEUS screen.
6) Wait for more than 3 sec.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.

6-2

DSC-H1

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the
internal memory.)

This item does not appear when a “Memory Stick” is inserted in the camera.
The default settings are marked with 

.

Formats the internal memory.

Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.

2

Select [OK] with v, then press z.
The format is complete.

OK

See the following procedure.

Cancel

Cancels the formatting.

Note 1: When replacing the SY-127 board, erase the data in internal memory of the board before replacement.
Note 2: When replacing the SY-127 board or the IC381 on the SY-127 board, execute formatting and initialize the

internal memory after replacement.

Copies all images in the internal memory to a “Memory Stick”.

1

Insert a “Memory Stick” having 32 MB or larger capacity.

2

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.

3

Select [OK] with v, then press z.
Copying starts. 

• Use fully charged Nickel-Metal Hydride batteries or the AC Adaptor (not supplied). If you attempt to 

copy image files using batteries with little remaining charge, the batteries may run out, causing copying to 
fail or possibly corrupting the data.

• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in 

 

Internal Memory Tool.

• You cannot select a folder copied on a “Memory Stick”.
• The setting of 

 (Print order) marks is not copied even when you copy data.

OK

See the following procedure.

Cancel

Cancels the copying.