Sony DSC-G1 (serv.man4) Service Manual ▷ View online
6-11
DSC-G1_ADJ
1-5.
VIDEO SYSTEM ADJUSTMENTS
1-5-1.
Function of Each Button on Video System
Adjustment Screen
Adjustment Screen
Click the [VIDEO SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the “VIDEO SYSTEM ADJUSTMENT” screen in Fig.
6-1-12 will appear.
screen, and the “VIDEO SYSTEM ADJUSTMENT” screen in Fig.
6-1-12 will appear.
Fig. 6-1-12
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Preparation] button
Notes for adjustment or jigs usd are displayed.
Notes for adjustment or jigs usd are displayed.
3
[Start] button
“Video Adjustment” starts.
“Video Adjustment” starts.
4
[Reset] button
This button functions same as the “Initialize” of the setup
screen.
This button functions same as the “Initialize” of the setup
screen.
5
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
1-5-2.
Adjustment Items of VIDEO System
Adjustment
Adjustment
The adjustment items of video system adjustment are as listed in
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Button
Adjustment
Signal
Name
VIDEO
VIDEO Output
Adjustment Level Adj.
Arbitrary
Note: The adjustment data cannot be read or
writen from the SeusEX.
Table 6-1-2
1-5-3. VIDEO Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. Video Output Level Adj.
3. Release of Data Setting during Video Adj.
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. Video Output Level Adj.
3. Release of Data Setting during Video Adj.
[Adjusting method]
1) Click the [Start] button of the VIDEO Adjustment.
2) The Automatic Adjustment Program executes the “1. Data
1) Click the [Start] button of the VIDEO Adjustment.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Video Adj.”.
3) If “1. Data Setting during Video Adj.” completed successfully,
the following screen is displayed during the execution of “2.
Video Output Level Adj.”. Using the [Up]/[Down] button on
the screen, adjust so that the sync level of the video signals
satisfies the specified value. After the adjustment, check that
the burst level of the video signals satisfies the specified value,
and click the [End] button in the screen.
Video Output Level Adj.”. Using the [Up]/[Down] button on
the screen, adjust so that the sync level of the video signals
satisfies the specified value. After the adjustment, check that
the burst level of the video signals satisfies the specified value,
and click the [End] button in the screen.
4) If the [End] button is clicked, “3. Release of Data Setting dur-
ing Video Adj.” will be executed.
5) Upon successful completion of all items of the VIDEO Ad-
justment, the following message is displayed. Click the [OK]
button.
button.
5
4
3
2
1
6-12
DSC-G1_ADJ
1-6.
CAMERA SYSTEM ADJUSTMENTS
1-6-1.
Function of Each Button on Camera System
Adjustment Screen
Adjustment Screen
Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-13 will appear.
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-13 will appear.
Fig. 6-1-13
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 7” starts.
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 7” starts.
4
[Reset] button
This button functions same as the Reset button of the camera.
This button functions same as the Reset button of the camera.
5
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment 1-7. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment 1-7. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)
5
4
3
2
1
2
3
6-13
DSC-G1_ADJ
1-6-2.
Adjustment Items of Camera System Adjust-
ment
ment
The adjustment items of camera system adjustment are as listed in
Table 6-1-3. The Automatic Adjustment Program divides the ad-
justment items into seven, camera adjustment 1-7. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Table 6-1-3. The Automatic Adjustment Program divides the ad-
justment items into seven, camera adjustment 1-7. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Note 1: The Automatic Adjustment Program does not support the “Wide Limit Adjustment”.
Note 2: Dark Siemens star chart.
Note 2: Dark Siemens star chart.
Table 6-1-3
Block
Page
Address
CAMERA Adjustment 1
Hall Adj.
Not required
11
61
0E00 to 0E04
(Note 1)
Wide Limit Adj.
Not required
11
61
0F18, 0F19
CAMERA Adjustment 2
Flange Back Adj.
Siemens star chart with ND filter
for minipattern box (Note 2) or
Flange back adjustment jig
for minipattern box (Note 2) or
Flange back adjustment jig
11
61
0F1C, 0F1D,
0F20 to 0F3F,
0F52, 0F53
0F20 to 0F3F,
0F52, 0F53
CAMERA Adjustment 3
Flange Back Check
Siemens star
(1.0m from front the lens)
(Luminance: 200 to 400 lux)
(1.0m from front the lens)
(Luminance: 200 to 400 lux)
-
-
-
F No. Compensation
11
61
095A, 095B
Measure Gain, LV Adj.
11
61
0961 to 0966
Mechanical Shutter Adj.
11
61
0980 to 0985,
0998 to 099A
0998 to 099A
AWB 3200K-5800K
Standard Data Input
Standard Data Input
11
61
0C00 to 0C21,
0C24 to 0C49
0C24 to 0C49
AWB 3200K-5800K Check
-
-
-
Color Reproduction
Adj. & Check
Adj. & Check
11
61
0C50 to 0C57
CCD Linearity Check
-
-
-
CCD White Defect
Compensation Check
Compensation Check
11
61
0000 to 00FF,
0F08 to 0F0D,
0F76 to 0F79,
0F7E to 0F83
0F08 to 0F0D,
0F76 to 0F79,
0F7E to 0F83
CCD Black Defect
Compensation Check
Compensation Check
11
61
0100 to 01FF,
0F70 to 0F75,
0F7A to 0F7D,
0F84 to 0F87
0F70 to 0F75,
0F7A to 0F7D,
0F84 to 0F87
CAMERA Adjustment 5
Strobe Adj.
Flash adjustment box (50 cm)
11
61
0C72 to 0C75
CAMERA Adjustment 6
Auto Focus Illumination Check
Flash adjustment box (50 cm)
11
61
0F10 to 0F15
CAMERA Adjustment 7
Angular Velocity Sensor
Sensitivity Adj.
Sensitivity Adj.
Not required
11
61
0E10, 0E11
Adjusting Address
Clear chart
(Standard picture frame)
(Standard picture frame)
Clear chart
(Standard picture frame)
(Standard picture frame)
Button Name
Adjustment
Subject
9 color chart
(Standard picture frame)
(Standard picture frame)
CAMERA Adjustment 4
6-14
DSC-G1_ADJ
1-6-3.
Adjusting Method
1.
CAMERA Adjustment 1
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Hall Adj.
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Hall Adj.
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes the “1. Data Set-
1) Click the [Start] button of CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes the “1. Data Set-
ting during Camera Adj.”.
3) Upon successful completion of “1. Data Setting during Cam-
era Adj.”, the following screen is displayed.
4) If the [OK] button is clicked, “2. Hall Adj.” and “3. Release of
Data Setting during Camera Adj.” will be executed.
5) Upon successful completion of all items of the CAMERA Ad-
justment 1, the following message is displayed. Click the [OK]
button.
button.
Click on the first or last page to see other DSC-G1 (serv.man4) service manuals if exist.