Sony XR-CA400 / XR-CA420X Service Manual ▷ View online
9
XR-CA400/CA420X
HEAT SINK (ISO)
1
seven screws
(PTT2.6
(PTT2.6
×
10)
2
heat sink (ISO)
10
XR-CA400/CA420X
SECTION 3
ASSEMBLY OF MECHANISM DECK
HOUSING
ARM (SUCTION)
Note:
Follow the assembly procedure in the numerical order given.
A
part
C
part
B
part
D
part
8
Hold the hanger by
bending the claw.
bending the claw.
6
Fit projection on D part.
4
Fit claw on B part.
3
Put the housing
under A part.
under A part.
5
Fit projection on C part.
1
Install the catch to the hanger.
2
Install the hanger onto
two claws of the housing.
two claws of the housing.
7
Hold the hanger by bending the claw.
hanger
housing
2
Move the arm (suction) in the arrow
direction and fit on projection.
direction and fit on projection.
1
Fit the arm (suction) on the shaft.
projection
11
XR-CA400/CA420X
LEVER (LDG-A) / (LDG-B)
GEAR (LDG-FT)
shaft A
shaft B
shaft C
1
Fit the lever (LDG-A) on
shafts A – C and install it.
shafts A – C and install it.
shaft A
shaft B
2
Fit the lever (LDG-B) on
shafts A and B and
install it.
shafts A and B and
install it.
3
type-E stop ring 2.0
gear (LDG-D)
5
gear (LDG-FT)
6
polyethylene washer
2
tension spring (LD-2)
2
tension spring (LD-1)
gear (LDG-FB)
lever (LDG-A)
hole
hole
4
Align hole in the gear (LDG-D)
with hole the lever (LDG-A).
with hole the lever (LDG-A).
3
Move the lever (LDG-B)
in the arrow direction.
in the arrow direction.
1
12
XR-CA400/CA420X
GUIDE (C)
MOUNTING POSITION OF CAPSTAN/REEL MOTOR (M901)
2
guide (C)
1
three claws
two precision screws
(P2
(P2
×
2)
Note: Mount the motor so that the
angle between of the
motor and the hole for the
screw becomes 30
motor and the hole for the
screw becomes 30
°
as
shown in this figure.
capstan/reel motor
(M901)
(M901)
30˚
Click on the first or last page to see other XR-CA400 / XR-CA420X service manuals if exist.