Sony XR-C653SP Service Manual ▷ View online
– 13 –
2-5. HEAT SINK
2-6. MAIN BOARD
4
PTT 2.6x8
3
PTT 2.6x8
2
PTT 2.6x8
1
PTT 2.6x8
5
PTT 2.6x8
6
heat sink
1
ground point screw
3
MAIN board
4
insulator
2
ground point screws
– 14 –
Note : Follow the assembly procedure in the numerical order given.
ALIGNMENT OF ROTARY SWITCH
SECTION 3
ASSEMBLY OF MECHANISM DECK
GEAR (LDG-E)
1
Align
∆
mark on the rotary switch
the position shown in the figure.
2
Align hole in the gear (LDG-D) with
the position shown in the figure.
chassis (S) assy
hole
2
Install the gear (LDG-E).
1
Align hole as shown in the figure.
– 15 –
CHASSIS (S) ASSY
LEVER (MODE)
1. Align
¢
mark on the rotary switch with
hole in the lever (mode).
2. Fit on positions
2. Fit on positions
A
,
B
and
C
and install
the lever (mode).
2
screw (PS 2x4)
3
screw (PS 2x4)
1
chassis (S) assy
∆
mark on rotary switch
hole in lever (mode)
lever (mode)
rotary switch
C
A
B
– 16 –
LEVER (PINCH SELECTION)
HEAD PLATE ASSY
2
lever (pinch selection)
1
Align.
6
step screw (HP)
3
Press the ATS lever.
4
Position the head plate
sub assy as shown
in the figure.
in the figure.
1
Fit in groove.
5
step screw (HP)
2
Fit shaft in groove.
head plate sub assy
ATS lever
groove
Click on the first or last page to see other XR-C653SP service manuals if exist.