Sony XR-C550RDS Service Manual ▷ View online
– 8 –
– 9 –
Note:
Follow the disassembly procedure in the numerical order given.
FRONT PANEL ASS’Y
SECTION 2
DISASSEMBLY
2
1
3
cover ass’y
1
2
COVER ASS’Y
1
Push the button
(release).
(release).
A
2
Remove the front panel ass’y
to the direction of the arrow
to the direction of the arrow
A
.
– 10 –
SUB PANEL, MECHANISM DECK (MG-25B-136)
5
screw
(PTT2.6
(PTT2.6
×
6)
6
mechanism deck
(MG-25B-136)
(MG-25B-136)
4
flexible flat cable
(CN301)
(CN301)
1
three screws
(PTT2.6
(PTT2.6
×
8)
2
sub panel
3
connector
(CN302)
(CN302)
MAIN BOARD, HEAT SINK
4
two ground point
screws
screws
3
two screws
(PTT2.6
(PTT2.6
×
8)
6
five screws
(PTT2.6
(PTT2.6
×
8)
3
screw (PTT2.6
×
8)
1
screw
(PTT2.6
(PTT2.6
×
8)
2
cord (with connector)
(line out front) (CN151)
(line out front) (CN151)
6
two screws
(PTT2.6
(PTT2.6
×
8)
7
heat sink
5
main board
1
three screws
(PTT2.6
(PTT2.6
×
8)
– 11 –
2
Install the hanger onto
two claws of the housing.
two claws of the housing.
1
Install the catch to the hanger.
7
Hold the hanger by bending the claw.
A
part
B
part
C
part
D
part
8
Hold the hanger by
bending the claw.
bending the claw.
3
Put the housing
under
under
A
part.
4
Fit claw on
B
part.
6
Fit projection on
D
part.
5
Fit projection on
C
part.
hanger
SECTION 3
ASSEMBLY OF MECHANISM DECK
housing
Note:
Follow the assembly procedure in the numerical order given.
HOUSING
2
Move the arm (suction) in the arrow
direction and fit on projection.
direction and fit on projection.
1
Fit the arm (suction) on the shaft.
projection
ARM (SUCTION)
Click on the first or last page to see other XR-C550RDS service manuals if exist.