Sony XR-C550 / XR-C550W Service Manual ▷ View online
– 13 –
GEAR (LDG-E)
Note :
Follow the assembly procedure in the numerical order given.
ALIGNMENT OF ROTARY SWITCH
SECTION 3
ASSEMBLY OF MECHANISM DECK
2 Align hole in the gear (LDG-D) with
the position shown in the figure.
1 Align ¢ mark on the rotary switch
the position shown in the figure.
the position shown in the figure.
hole
2 Install the gear (LDG-E).
1 Align hole as shown in the figure.
chassis (S) assy
– 14 –
CHASSIS (S) ASSY
LEVER (MODE)
3 screw (PS 2x4)
2 screw (PS 2x4)
1 chassis (S) assy
1. Align
¢ mark on the rotary switch with
hole in the lever (mode).
2. Fit on positions A, B and C and install
the lever (mode).
2. Fit on positions A, B and C and install
the lever (mode).
¢ mark on rotary switch
hole in lever (mode)
lever (mode)
C
rotary switch
B
A
– 15 –
LEVER (PINCH SELECTION)
1 Align.
2 lever (pinch selection)
6 step screw (HP)
5 step screw (HP)
1 Fit in groove.
ATS lever
3 Press the ATS lever.
4 Position the head plate sub
assy as shown in the figure.
assy as shown in the figure.
2 Fit shaft in groove.
head plate sub assy
groove
HEAD PLATE ASSY
– 16 –
LEVER (PINCH) ASSY
4 Fit shaft of the lever (pinch) assy in
hole on the chassis (M) assy and
install the lever (pinch) assy.
hole on the chassis (M) assy and
install the lever (pinch) assy.
5 claw
B
shaft
C
shaft
7 Install the spring (pinch press) to shaft A.
Set the ends of spring to B and C.
Set the ends of spring to B and C.
C
B
shaft A
hole
hole
2 claw
3 polyethylene washer
1 Fit shaft of the lever (pinch) assy in
hole on the chassis (M) assy and
install the lever (pinch) assy.
hole on the chassis (M) assy and
install the lever (pinch) assy.
1 Install the catch to the hanger.
hanger
6 Fit projection on D part.
5 Fit projections on C part.
2 Install the hanger on to
two claws of the housing.
two claws of the housing.
4 Fit claw on B part.
3 Put the housing
under A part.
under A part.
C part
D part
A part
HOUSING
6 polyethylene washer
8 Holder the hanger by
bending the claw.
bending the claw.
B part
7 Holder the hanger by bending the claw.
Click on the first or last page to see other XR-C550 / XR-C550W service manuals if exist.