Sony XAV-C1 Service Manual ▷ View online
SERVICE MANUAL
AV CENTER
SPECIFICATIONS
XAV-C1
Ver. 1.1 2008.12
– Continued on next page –
9-887-461-02
2008L05-1
© 2008.12
© 2008.12
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
Published by Sony Techno Create Corporation
US Model
Canadian Model
AEP Model
E Model
Australian Model
Chinese Model
•
US and Canadian models include the
connection box (XA-123).
connection box (XA-123).
Model Name Using Similar Mechanism
NEW
DVD
DVD Mechanism Type
MDAU51
Section
Optical Pick-up Name
HPD-60
OPEN/CLOSE
Model Name Using Similar Mechanism
NEW
Section
Open/Close Mechanism Type
DB-M03
Copyrights
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents, other
intellectual property rights owned by
Macrovision Corporation, and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
protection technology that is protected by
method claims of certain U.S. patents, other
intellectual property rights owned by
Macrovision Corporation, and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D
symbol are trademarks of Dolby
Laboratories.
Laboratories.
“Dolby”, “Pro Logic”, and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS 2.0 + Digital Out” are
trademarks of Digital Theater Systems, Inc.
trademarks of Digital Theater Systems, Inc.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
22 watts per channel minimum continuous average power into 4 ohms, 4 channels driven
from 20 Hz to 20 kHz with no more than 5 % total harmonic distortion.
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
22 watts per channel minimum continuous average power into 4 ohms, 4 channels driven
from 20 Hz to 20 kHz with no more than 5 % total harmonic distortion.
CEA2006 Standard
Power Output: 17 Watts RMS
Power Output: 17 Watts RMS
×
4 at
4 Ohms < 1% THD+N
SN Ratio: 82 dBA
(reference: 1 Watt into 4 Ohms)
SN Ratio: 82 dBA
(reference: 1 Watt into 4 Ohms)
System
Laser
Semiconductor laser
Signal format system
NTSC (US, CND)
PAL (AEP, RU, E, AUS, CH)
PAL (AEP, RU, E, AUS, CH)
Monitor section
Display type Wide LCD color monitor
Size
Size
7 in.
System
TFT active matrix
Number of pixel
336,960 pixels
DVD/CD Player section
Signal-to-noise ratio
100 dB
Frequency response
10
−
20,000 Hz
Wow and flutter
Below measurable limit
Harmonic distortion (DVD)
0.01%
Tuner section
FM
Tuning range
Tuning range
87.5 - 108MHz (AEP, RU, E, AUS, CH)
87.5 - 107.9 MHz (US, CND)
87.5 - 107.9 MHz (US, CND)
Intermediate frequency
10.7 MHz/550 kHz
Usable sensitivity
9 dBf
Frequency response
30 - 15,000 Hz
Selectivity
75 dB (400 kHz)
S/N ratio
64 dB (stereo)
69 dB (mono)
69 dB (mono)
Harmonic distortion at 1 kHz
0.5% (stereo)
0.4% (mono)
0.4% (mono)
Separation
35 dB at 1 kHz
US and foreign patents licensed from Dolby
Laboratories.
Laboratories.
2
XAV-C1
General
Power requirements
12 V DC, from car battery
(negative ground)
(negative ground)
Consumption current rating
Max. 10 A
Inputs
Power supply (1)
AUX (3)
AUX (3)
Outputs
Front PRE out (1)
Rear PRE out (1)
Subwoofer (mono) (2)
Power aerial relay control lead (1)
Power amplifier control lead (1)
Rear Monitor OUT (1)
Rear PRE out (1)
Subwoofer (mono) (2)
Power aerial relay control lead (1)
Power amplifier control lead (1)
Rear Monitor OUT (1)
Tone controls Bass
±
10 dB at 100 Hz
Treble
±
10 dB at 10 kHz
Dimensions With monitor closed
Approx. 178
×
50
×
185 mm
(W
×
H
×
D)
Mass
Approx. 1.7 kg
Supplied accessories
Remote commander RM-X706 (1)
(incl. 1 lithium battery)
Parts for installation and
connections (1 set)
Operating Instructions (1 set)
(incl. 1 lithium battery)
Parts for installation and
connections (1 set)
Operating Instructions (1 set)
Design and specifications are subject to
change without notice.
change without notice.
Connection box for XM tuner (1)
(US, CND)
(US, CND)
Amplifier section
Outputs
Speaker outputs
(sure seal connectors)
(sure seal connectors)
Speaker impedance
4 - 8 ohms
Maximum power output
50 W
×
4 (into 4 ohms, at 1 kHz)
AM
Tuning range
Tuning range
531 - 1,602 kHz (AEP, RU, E, AUS, CH)
530 - 1,710 kHz (US, CND)
530 - 1,710 kHz (US, CND)
Intermediate frequency
10.8 MHz / 450 kHz
Usable sensitivity
30
µ
V
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0
SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
•
Abbreviation
AUS : Australian model
CH
AUS : Australian model
CH
: Chinese model
CND : Canadian model
RU
RU
: Russian model
CAUTION
The use of optical instruments with this
product will increase eye hazard.
product will increase eye hazard.
As the laser beam used in this CD/DVD
player is harmful to eyes, do not attempt to
disassemble the cabinet. Refer servicing to
qualified personnel only.
player is harmful to eyes, do not attempt to
disassemble the cabinet. Refer servicing to
qualified personnel only.
This label is located on the bottom of the chassis.
This product is classified as a CLASS 1 LASER PRODUCT.
This product is classified as a CLASS 1 LASER PRODUCT.
This label is located on the top exterior.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
other than those specified herein may result in hazardous radiation
exposure.
This label is located on the bottom of the
chassis.
chassis.
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
•
Keep the temperature of the soldering iron around 270 ˚C
during repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
– US, Canadian models –
3
XAV-C1
TABLE OF CONTENTS
1.
SERVICING NOTES
...............................................
4
2.
GENERAL
...................................................................
7
3.
DISASSEMBLY
3-1.
Disassembly Flow ........................................................... 12
3-2.
Front Panel Assy .............................................................. 13
3-3.
Chassis secion .................................................................. 13
3-4.
Bracket (Slider) ............................................................... 14
3-5.
SLIDER Board ................................................................ 15
3-6.
Bracket (Motor) Assy (M2) ............................................. 15
3-7.
Bracket (Motor S) Assy (M1) .......................................... 16
3-8.
Monitor Block ................................................................. 16
3-9.
Gear (1), Gear (4) ............................................................ 17
3-10. Mechanical Complete Assy (DB-M03) ........................... 17
3-11. LCD Board ...................................................................... 18
3-12. LCD ................................................................................. 18
3-13. DVD-ROM Mechanism Deck (MDAU51) ...................... 19
3-14. MAIN Board .................................................................... 19
3-15. SERVO Board .................................................................. 20
3-16. Clamp Chassis Assy, Disc Assy Plate ............................. 20
3-17. DVD Chassis Assy .......................................................... 21
3-11. LCD Board ...................................................................... 18
3-12. LCD ................................................................................. 18
3-13. DVD-ROM Mechanism Deck (MDAU51) ...................... 19
3-14. MAIN Board .................................................................... 19
3-15. SERVO Board .................................................................. 20
3-16. Clamp Chassis Assy, Disc Assy Plate ............................. 20
3-17. DVD Chassis Assy .......................................................... 21
4.
ELECTRICAL ADJUSTMENTS
......................... 22
5.
EXPLODED VIEWS
5-1.
Front Panel Section ......................................................... 24
5-2.
Detach Front Panel Section ............................................. 25
5-3.
LCD Cover Assy Section ................................................. 26
5-4.
Monitor Section ............................................................... 27
5-5.
Open/Close Mechanism Deck Section (DB-M03) .......... 28
5-6.
Chassis Section ................................................................ 29
5-7.
MDAU51 DVD ROM Mechanism Deck Section ............ 30
5-8.
Accessories ...................................................................... 31
4
XAV-C1
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
Never look into the laser diode emission from right above when
checking it for adjustment. It is feared that you will lose your sight.
checking it for adjustment. It is feared that you will lose your sight.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•
Unleaded solder melts at a temperature about 40 ˚C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
REGION CODE
This system is used to protect software
copyrights.
The region code is located on the bottom of
the unit, and only DVDs labeled with an
identical region code can be played on this
unit.
copyrights.
The region code is located on the bottom of
the unit, and only DVDs labeled with an
identical region code can be played on this
unit.
DVDs labeled
ALL
can be also played on this
unit.
If you try to play any other DVD, the
message “Can not play” will appear on the
monitor screen. Depending on the DVD, no
If you try to play any other DVD, the
message “Can not play” will appear on the
monitor screen. Depending on the DVD, no
region code may be labeled even though
playing the DVD is prohibited by area
restrictions.
playing the DVD is prohibited by area
restrictions.
Region code
Label indication
Signal format
Region
Destination
system
code
NTSC
1
US, Canadian models
PAL
2
AEP model
PAL
3
E, Australian models
PAL
5
Russian model
PAL
6
Chinese model
Playable discs
Format of discs
DVD VIDEO
DVD-R*
DVD-RW*
DVD+R*
DVD+RW*
Video CD
Audio CD
CD-R*
CD-RW*
* Discs that are not finalized cannot be played.
“DVD VIDEO”, “DVD-R”, “DVD-RW”, “DVD+R”,
and “DVD+RW” are trademarks.
and “DVD+RW” are trademarks.
DVD
A DVD contains both audio and visual data.
A 12-cm disc can hold 7 times the amount of
data contained in a CD-ROM, which equals
to 4 consecutive hours of playing time (8
hours for double-sided discs). DVDs are
divided into 4 types: single sided single layer,
single sided double layer, double sided single
layer, and double sided double layer.
A 12-cm disc can hold 7 times the amount of
data contained in a CD-ROM, which equals
to 4 consecutive hours of playing time (8
hours for double-sided discs). DVDs are
divided into 4 types: single sided single layer,
single sided double layer, double sided single
layer, and double sided double layer.
Video CD (VCD)
A Video CD can contain both audio and
visual data on a disc with the same size as a
regular Audio CD. The playing time is 74
minutes for a standard 12-cm CD.
visual data on a disc with the same size as a
regular Audio CD. The playing time is 74
minutes for a standard 12-cm CD.
Audio CD
An Audio CD containing audio data. The
playing time is 74 minutes for a standard 12-
cm CD.
playing time is 74 minutes for a standard 12-
cm CD.
CD-Recordable (CD-R)
With a CD-R, you can edit audio data. You
can write information on a CD-R only once.
can write information on a CD-R only once.
CD-Rewritable (CD-RW)
With a CD-RW, you can edit audio data. You
can write information on a CD-RW again and
again.
can write information on a CD-RW again and
again.
CD-Extra
A CD-Extra has two sections (sessions) for
audio and data respectively. You can only
play the section of audio on this unit.
audio and data respectively. You can only
play the section of audio on this unit.
Notes
•
You can play DVD-Rs/DVD-RWs, DVD+Rs/
DVD+RWs and CD-Rs/CD-RWs designed for audio
with this unit. However, depending on the recorded
conditions, you cannot play some discs.
with this unit. However, depending on the recorded
conditions, you cannot play some discs.
•
You cannot play CD-Rs/CD-RWs, DVD-Rs/DVD-
RWs or DVD+Rs/DVD+RWs that are not finalized.
•
Discs created in Packet Write format cannot be played.
•
The discs listed below cannot be played on this unit:
−
8-cm discs
−
CD-ROM (the data other than the MP3 or JPEG files)
−
CD-G
−
Photo-CD
−
VSD (Video single disc)
−
DVD-ROM (the data other than the MP3 or JPEG
files)
files)
−
DVD-RAM
−
DVD-Audio
−
CPRM
−
Active-Audio (Data)
−
CD-Extra (Data)
−
Mixed CD
−
SVCD (Super Video CD)
−
CDV
−
CD-F
−
SACD (Super Audio CD)