Sony XAV-601BT Service Manual ▷ View online
XAV-601BT
65
Pin No.
Pin Name
I/O
Description
53
SELF_SW
I
Self loading position detection switch input terminal
54
IN_SW
I
Disc insert detection switch input terminal
55
D_SW
I
Chucking end detection switch input terminal
56
MECHA_RESET
O
Reset signal output to the DVD processor and fl ash memory “L”: reset
57
MECHA_CTS
O
Clear to send signal output to the DVD processor
58
IPOD_DET
-
Not used
59
AP_CNT1
-
Not used
60
VCC
-
Power supply terminal (+3.3V)
61
AP_RESET
O
Reset signal output to the panel section “L”: reset
62
VSS
-
Ground terminal
63
AP_ON
O
Power supply on/off control signal output to the DC/DC converter “H”: power on
64
ILL_IN
I
Illumination line detection signal input terminal for the automatic dimmer control
“L”: dimmer on
“L”: dimmer on
65
NCO
-
Not used
66
EJECT
O
Loading motor drive signal (eject direction) output terminal “H”: motor on
67
LOAD
O
Loading motor drive signal (loading direction) output terminal “H”: motor on
68
DR_ON
O
Power supply on/off control signal output terminal for loading motor driver “H”: power on
69
VMUTE
O
Video muting on/off control signal output to the video select IC “L”: muting on
70, 71
SEL_VOUT0,
SEL_VOUT1
O
Video signal selection signal output to the video select IC
72
NOSE_SW
I
Front panel connecting detection signal and error signal input from the front panel section
“L”: normal mode
“L”: normal mode
73, 74
SEL_VIN0, SEL_VIN1
O
Video signal selection signal output to the video select IC
75
AP_Tx
O
Serial data output to the panel section
76
AP_Rx
I
Serial data input from the panel section
77
EN_SYS
O
Power supply on/off control signal output terminal for DC/DC converter “H”: power on
78
IPOD
O
iPod connection mode setting terminal Fixed at “L” in this unit
79
USB_ON
O
Power supply on/off control signal output terminal for USB section “H”: power on
80
USB_OVER
I
USB over current detection signal input from the DC/DC converter “L”: over current
81
RE_0
I
Jog dial pulse input from the panel section (A phase input) (for volume)
82
RE_1
I
Jog dial pulse input from the panel section (B phase input) (for volume)
83
IDET
I
Monitor open/close motor drive current detection signal input terminal Not used
84
TEMP
I
Temperature detection signal input terminal Not used
85
KEY_IN0
I
Front panel key input terminal (A/D input)
86
RC_IN0
I
Rotary commander key input terminal (A/D input)
87
RCACK
I
Acknowledge signal (wake up signal) input terminal for the rotary commander key entry
Acknowledge signal is input to accept any function key in the standby state On at input of “H”
Acknowledge signal is input to accept any function key in the standby state On at input of “H”
88
KEYACK
I
Acknowledge signal (wake up signal) input terminal for the front panel key entry
Acknowledge signal is input to accept any function key in the standby state On at input of “H”
Acknowledge signal is input to accept any function key in the standby state On at input of “H”
89
RC_IN1
I
Rotary commander key input terminal
90
M_LOW
O
Monitor open/close speed (low) control signal output terminal Not used
91
M_MID
O
Monitor open/close speed (middle) control signal output terminal Not used
92
OPEN
I
Monitor open detection switch input terminal Not used
93
CLOSE
I
Monitor close detection switch input terminal Not used
94
AVSS
-
Ground terminal
95
MOTOR_ON
O
Power supply on/off control signal output terminal Not used
96
VREF
I
Reference voltage (+3.3V) input terminal (for A/D converter)
97
AVCC
-
Power supply terminal (+3.3V)
98
MOTOR_+
O
Monitor open/close motor drive signal (forward direction) output terminal Not used
99
MOTOR_-
O
Monitor open/close motor drive signal (reverse direction) output terminal Not used
100
MODEL_SEL0
I
Model setting terminal
66
XAV-601BT
SECTION 6
EXPLODED VIEWS
CNC1
1-839-912-11 CORD, CONNECTION (20P) (REVERSE IN/
SUB OUT/FRONT AUDIO OUT/REAR AUDIO OUT/
AUX1 AUDIO IN/AUX2 AUDIO IN)
(RU, E (NTSC), E (PAL), EA)
CNC1
1-839-912-21 CORD, CONNECTION (20P) (SPEED IN/
REVERSE IN/SUB OUT/FRONT AUDIO OUT/
REAR AUDIO OUT/AUX1 AUDIO IN/
AUX2 AUDIO IN) (US, CND, AEP, UK)
PW1
1-839-376-31 CONNECTION CORD FOR AUTOMOBILE
(POWER) (US, CND, E (NTSC), E (PAL), EA)
PW1
1-839-626-11 CONNECTION CORD (ISO) (POWER)
(AEP, RU, UK)
#2
7-685-792-01 SCREW +PTT 2.6X6 (S)
#3
7-685-793-09 SCREW +PTT 2.6X8 (S)
#7
7-685-791-01 SCREW +PTT 2.6X5 (S)
#8
7-627-552-87 SCREW, PRECISION +P 1.7X2.2
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
• Abbreviation
CND : Canadian model
EA
CND : Canadian model
EA
: Saudi Arabia model
RU
: Russian model
6-1. OVERALL SECTION
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
Les composants identifi és par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por-
tant le numéro spécifi é.
front panel section
chassis section
sub panel section
not supplied
#2
#2
#2
#2
#2
#3
#3
#3
#3
#2
#2
DVD mechanism deck section
(MG-613XD-187)
(MG-613XD-187)
PW1
#2
#3
not supplied
CNC1
not supplied
not supplied
#8
#2 (for MG-614D-189)
#7 (for MG-613XD-187)
#7 (for MG-613XD-187)
#2 (for MG-614D-189)
#7 (for MG-613XD-187)
#7 (for MG-613XD-187)
E
E
(MG-613XD-187 only)
X
X
Ver. 1.3
Note: Refer to SUPPLEMENT-2 for discrim-
ination of the DVD mechanism deck
(MG-613XD-187 or MG-614D-189).
(MG-613XD-187 or MG-614D-189).
67
XAV-601BT
6-2. FRONT PANEL SECTION
51
3-250-543-02 SCREW (+B P-TITE M2)
52
3-042-244-11 SCREW
(T)
53
4-416-514-01 SHEET
(LOCK
ASSY)
54
4-298-925-01 PLATE
(GND)
55
3-275-728-11 SCREW (+B, TT, P-TYPE, 2XL)
56
A-1871-775-A D-SUB6 BOARD, COMPLETE
57
3-042-244-51 SCREW
(T)
58
A-1871-772-A DISP BOARD, COMPLETE (US, CND, AEP, UK)
58
A-1871-773-A DISP BOARD, COMPLETE (RU, E (PAL), EA)
58
A-1871-774-A DISP BOARD, COMPLETE (E (NTSC))
59
A-1871-776-A KEY6 BOARD, COMPLETE
60
4-434-436-11 SHEET (HEAT), TRANSFER, T0.5
61
4-298-927-01 SHEILD
(AP)
62
4-446-848-01 GASKET (BT), H2.5
63
4-422-724-01 GASKET (CHASSIS) (See Note 1)
64
4-428-135-01 SHEET
(SCREW)
65
4-415-479-01 SCREW +Z S1.7X4
66
X-2584-668-6 PANEL (SV) ASSY, FRONT (US, CND)
66
X-2584-669-6 PANEL (SV) ASSY, FRONT (AEP, UK)
66
X-2584-670-6 PANEL (SV) ASSY, FRONT
(RU, E (PAL), E (NTSC), EA)
67
X-2584-672-1 KNOB (VOL) (SV) ASSY
68
4-298-914-01 BUTTON (RELEASE) ( )
69
4-298-930-02 SPRING
(RELEASE)
70
4-430-672-01 CUSHION (LCD), SIDE
71
4-429-668-01 CUSHION (LCD), LOWER
72
4-426-954-01 SHEET
(LCD)
FP1
A-1865-030-A PANEL COMPLETE ASSY, FRONT
(RU, E (PAL), EA)
FP1
A-1871-769-A PANEL COMPLETE ASSY, FRONT (US, CND)
FP1
A-1871-770-A PANEL COMPLETE ASSY, FRONT (AEP, UK)
FP1
A-1871-771-A PANEL COMPLETE ASSY, FRONT (E (NTSC))
FFC3
1-839-934-11 CABLE, FLEXIBLE FLAT (20 CORE)
LCD1
1-811-310-11
DISPLAY PANEL, LIQUID CRYSTAL
TPN1 1-458-489-11 TOUCH
PANEL
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
51
62
60
61
60
63
63
63
63
55
57
55
57
57
57
55
51
51
56
59
57
52
52
52
52
66
67
72
65
64
64
69
71
71
71
70
70
70
54
not supplied
not supplied
LCD1
TPN1
not supplied
FFC3
A
B
C
A
C
FP1
58
65
68
B
53
(See Note 1)
Note 2: When complete DISP board is exchanged,
exchanged old complete DISP board and is
destroyed with the hammer, and throw out it.
destroyed with the hammer, and throw out it.
Note 1: Ref. No. 63 (GASKET (CHASSIS)) is
deleted from the midway of production.
Ver. 1.3
68
XAV-601BT
101
4-298-964-01 SHAFT (PANEL SUB) (See Note 2)
102
3-042-244-11 SCREW
(T)
103
3-243-844-02 CUSHION (SUB PANEL)
104
X-2583-155-2 PANEL (SUB6) ASSY, SUB
105
X-2582-850-6 LOCK ASSY (2DIN) (See Note 1)
106
A-1871-747-A M-SUB6 BOARD, COMPLETE
107
4-298-966-01 PLATE (POSITION) (See Note 2)
108
4-298-967-02 PLATE
(ADJUST)
109
4-298-965-01 PLATE (GUIDE) (See Note 2)
110
4-439-172-01 CUSHION
(LOCK
ASSY)
FPB1
1-886-726-11 PRINTED WIRING BOARD, FLEXIBLE
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
6-3. SUB PANEL SECTION
FPB1
106
107
103
103
107
107
109
108
108
105
104
101
101
102
102
110
Note 1: About Ref. No. 105
LOCK ASSY (2DIN) has been changed from the midway of production.
When replacing new parts, please check the existence of a cushion.
If there is no cushion, please install the CUSHION (LOCK ASSY) (Ref. No. 110) and exchange LOCK ASSY (2DIN).
LOCK ASSY (2DIN) has been changed from the midway of production.
When replacing new parts, please check the existence of a cushion.
If there is no cushion, please install the CUSHION (LOCK ASSY) (Ref. No. 110) and exchange LOCK ASSY (2DIN).
Check method
$W\SH
%W\SH
±LQQHUVLGHYLHZ±
sub panel (SUB6) assy
There is no cushion (lock assy).
There is a cushion (lock assy).
6HH1RWH
6HH1RWH
6HH1RWH
110
Ver. 1.3
Note 2: These parts are deleted from
the midway of production.
Click on the first or last page to see other XAV-601BT service manuals if exist.