Sony MEX-V50DT Service Manual ▷ View online
MEX-V50DT
5
SECTION 3
DISASSEMBLY
•
This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
3-2. COVER
3-2. COVER
(Page
(Page
5)
3-3. DVD DECK ASSY (DL-C28DB2-YG2)
(Page
(Page
6)
3-4. SUB PANEL COMPLETE ASSY
(Page
(Page
7)
3-5. MAIN
BOARD
(Page
7)
SET
FRONT PANEL SECTION
Note: Illustration of disassembly is omitted.
1 screw
(M3
u 5)
2 boss
4 cover
2 boss
3 two claws
MEX-V50DT
6
3-3. DVD DECK ASSY (DL-C28DB2-YG2)
Note 1: Before disconnecting the FPC (SJ-V049-01) of optical pick-up block, solder the short-land.
Note 3: When assembling the optical pick-up block,
remove the solder of short-land after
connecting the FPC (SJ-V049-01).
2
1 screw
(M3
u 5)
4 Lift up the lead pin.
5 FPC (SJ-V049-01)
(CON2)
6 FFC (SJ-V049-0 deck to MAIN MT)
(J101)
7 DVD deck assy
(DL-C28DB2-YG2)
1 three screws
(M3
u 5)
Note
2: When you install three screws (M3 × 5),
fix by the following bond.
Part No.
Description
7-432-916-01 BOND TAFF, SONY 20 ml
3 Solder the short-land.
)OH[LEOHSULQWHGFDEOHVHWWLQJ
rear side
MAIN board
lead pin
MEX-V50DT
7
3-5. MAIN BOARD
3-4. SUB PANEL COMPLETE ASSY
3 two screws
(M2.6
u 3)
5 FFC (S. panel to M. MT. SJ-V049-0)
(CON1)
6 sub panel complete assy
3 two screws
(M2.6
u 3)
2 Remove
the
solder.
1 fixing cloth
sub panel complete assy
4
:LUHVHWWLQJ
front side
fixing cloth
MAIN board
8 screw
(M3
u 8)
8 two screws
(M3
u 8)
9 three screws
(M2.6
u 5)
1 fuse (blade type) (auto fuse)
(10A/32V)
(FU1)
2 connector
(CON402)
4 connector
(CN7)
6 connector
(CON5)
3 cord (V/A out) with bracket
(video out, audio line output)
(CNJ1)
5 cord (audio) with bracket
(audio line input, audio line output)
(CNJ2)
7 cord (video in) with bracket
(video in, camera in)
(CNJ3)
0 MAIN board
8
MEX-V50DT
SECTION 4
EXPLODED VIEW
1
4-294-047-01 SCREW (M2.6X3 B/F)
2
4-294-050-01 SCREW (M3X5 B/F)
3
4-294-049-01 SCREW (M2.6X5 B/F)
4
A-1850-284-A MAIN BOARD, COMPLETE (for SERVICE)
5
4-294-048-01 SCREW (M3X8 B/F)
CNJ1
1-968-019-11 CORD (V/A OUT) WITH BRACKET
(VIDEO OUT, AUDIO LINE OUTPUT)
CNJ2
1-968-020-11 CORD (AUDIO) WITH BRACKET
(AUDIO LINE INPUT, AUDIO LINE OUTPUT)
CNJ3
1-968-021-11 CORD (VIDEO IN) WITH BRACKET
(VIDEO IN, CAMERA IN)
CNP1
9-885-160-70 CORD WITH CONNECTOR (SJ-V049-1) (POWER)
FFC1
9-885-160-69 FFC (S.PANEL TO M.MT, SJ-V049-0)
FFC2
9-885-160-68 FFC (DECK TO MAIN MT, SJ-V049-0)
FP1
A-1850-283-A PANEL
COMPLETE ASSY, FRONT (Including Case)
FPC1 9-885-160-67 FPC
(SJ-V049-01)
FU1
1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) (10A/32V)
0 MD1
A-1844-213-A DVD DECK ASSY (DL-C28DB2-YG2)
SUB1
A-1844-212-A PANEL COMPLETE ASSY, SUB
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
The components identifi ed by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
or dotted line with mark 0 are critical for
safety.
Replace only with part number specifi ed.
CNP1
not supplied
CNJ1
CNJ2
CNJ3
not supplied
FU1
MAIN board
SUB1
FFC1
FPC1
FP1
MD1
not supplied
not supplied
not supplied
not supplied
1
C
A
A
B
B
D
C
2
2
3
4
5
5
5
3
2
2
1
FFC2
not supplied
not supplied
3
3
5
D
Click on the first or last page to see other MEX-V50DT service manuals if exist.