Sony MEX-N4100BE / MEX-N4100BT / MEX-N4150BT (serv.man2) Service Manual ▷ View online
MEMO
MEX-N4100BE/N4100BT/N4150BT
17
MEX-N4100BE/N4100BT/N4150BT
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.12
New
1.1
2015.11
Change of Part No. for OPERATING INSTRUCTION
(US, Canadian, AEP, Russian, UK and Australian models)
Change of MAIN board (Suffi x-21/-31) (SUPPLEMENT-1)
(SMR-15030)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
MEX-N4100BE/N4100BT/N4150BT
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.12
New
1.1
2015.11
Change of Part No. for OPERATING INSTRUCTION
(US, Canadian, AEP, Russian, UK and Australian models)
Change of MAIN board (Suffi x-21/-31) (SUPPLEMENT-1)
(SMR-15030)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
MEX-N4100BE/N4100BT/N4150BT
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.12
New
1.1
2015.11
Change of Part No. for OPERATING INSTRUCTION
(US, Canadian, AEP, Russian, UK and Australian models)
Change of MAIN board (Suffi x-21/-31) (SUPPLEMENT-1)
(SMR-15030)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
