Sony MEX-DV2200 / MEX-DV220EE Service Manual ▷ View online
MEX-DV220EE/DV2200
5
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension
cable) as shown below.
When repairing or servicing this set, connect the jig (extension
cable) as shown below.
• Connect the MAIN board (CN101) and the SERVO board
(CN3) with the extension cable (Part No. J-2502-107-1).
SERVO board
(CN3)
(CN3)
MAIN board
(CN101)
(CN101)
extension cable
(Part No. J-2502-107-1)
(Part No. J-2502-107-1)
NOTE FOR FLEXIBLE BOARD OF THE OPTICAL
PICK-UP
When connecting or disconnecting the fl exible board of the opti-
cal pick-up to or from the CN2 of the SERVO board, follow the
procedure given below.
PICK-UP
When connecting or disconnecting the fl exible board of the opti-
cal pick-up to or from the CN2 of the SERVO board, follow the
procedure given below.
Note: When soldering the short lands, solder within 5 seconds at the tem-
perature of soldering iron below 300°C.
Disconnection:
1. Solder two shortland.
2. Disconnect the fl exible board from the CN2 of the SERVO
1. Solder two shortland.
2. Disconnect the fl exible board from the CN2 of the SERVO
board.
Connection:
1. Connect
1. Connect
the
fl exible board to the CN2 of the SERVO board.
2. Unsolder two shortland.
MEX-DV220EE/DV2200
6
Playable discs and symbols used in this manual
This unit can play various video/audio discs.
The following chart helps you to check if a disc is supported by this unit, as well as what functions are
available for a given disc type.
The following chart helps you to check if a disc is supported by this unit, as well as what functions are
available for a given disc type.
*1 Audio files can also be stored.
*2 Video/image files can also be stored.
*2 Video/image files can also be stored.
Note
“DVD” may be used in this manual as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/
DVD+RWs.
“DVD” may be used in this manual as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/
DVD+RWs.
Disc symbol in manual
Disc format
Disc logo
VI
D
EO
DVD VIDEO
DVD-R*
1
DVD-R DL*
1
(Video mode/VR mode)
DVD-RW*
1
(Video mode/VR mode)
DVD+R*
1
DVD+R DL*
1
DVD+RW*
1
Video CD
(Ver. 1.0/1.1/2.0)
AU
D
IO
Super Audio CD
Audio CD
CD-ROM*
2
CD-R*
2
CD-RW*
2
MEX-DV220EE/DV2200
7
The following chart shows the supported compression formats, their file types, and the disc types on
which those files can be stored.
Available functions differ depending on the format, regardless of disc type. The format symbols below
appear next to the description of functions available for that format.
which those files can be stored.
Available functions differ depending on the format, regardless of disc type. The format symbols below
appear next to the description of functions available for that format.
Unsupported discs
The following discs cannot be played on this unit.
• 8 cm (3
• 8 cm (3
1
/
4
in) discs
• 12 cm (4
3
/
4
in) discs utilizing only the inner 8 cm (3
1
/
4
in) data portion (the rest is transparent)
• CD-ROM containing files other than MP3/WMA/JPEG/DivX (DV220EE/DV2200: E and Indian models only)
• CD-G
• Photo-CD
• VSD (Video Single Disc)
• DVD-ROM containing files other than MP3/WMA/JPEG/DivX (DV220EE/DV2200: E and Indian models only)
• DVD-RAM
• DVD-Audio
• Active-Audio (Data)
• SVCD (Super Video CD)
• CDV
• Discs created in Packet Write format
• CD-G
• Photo-CD
• VSD (Video Single Disc)
• DVD-ROM containing files other than MP3/WMA/JPEG/DivX (DV220EE/DV2200: E and Indian models only)
• DVD-RAM
• DVD-Audio
• Active-Audio (Data)
• SVCD (Super Video CD)
• CDV
• Discs created in Packet Write format
Note
Even compatible discs may not be playable on this unit, depending on their recorded condition.
Even compatible discs may not be playable on this unit, depending on their recorded condition.
Region code
The region system is used to protect software copyrights.
The region code is located on the bottom of the unit, and only DVDs
labeled with an identical region code can be played on this unit.
The region code is located on the bottom of the unit, and only DVDs
labeled with an identical region code can be played on this unit.
DVDs labeled
can also be played.
If you try to play any other DVD, the message “Playback prohibited
by region code.” will appear on the monitor screen. Depending on
the DVD, no region code may be labeled even though playing the
DVD is prohibited by area restrictions.
by region code.” will appear on the monitor screen. Depending on
the DVD, no region code may be labeled even though playing the
DVD is prohibited by area restrictions.
Format symbol in manual
File type
Storable disc type
MP3 audio file
DATA DVDs
DVD-ROM
DVD-R
DVD-R DL
DVD-RW
DVD+R
DVD+R DL
DVD+RW
DATA CDs
CD-ROM
CD-R
CD-RW
WMA audio file
JPEG image file
DivX
®
video file
MULTI DISC PLAYER
DC : 12V NEGATIVE GROUND
SERIAL NO.
CLASS 1
LASER PRODUCT
LASER PRODUCT
Region code
ALL
(DV220EE/DV2200: E and
Indian models only)
(DV220EE/DV2200: E and
Indian models only)
– DV220EE/DV2200
(E and Indian models) –
(E and Indian models) –
– DV2200
(US and Canadian models) –
(US and Canadian models) –
MULTI DISC PLAYER
DC : 12V NEGATIVE GROUND
SERIAL NO.
Region code
MEX-DV220EE/DV2200
8
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Location and function of controls
Main unit
Front panel removed
OFF
SOURCE
MODE
SEEK
SEEK
DSPL
AF/TA
SETUP
OPEN
ALBUM
REP
SHUF
3
1
2
4
5
6
AUX
PUSH SOUND/ENTER
PTY
1
q;
9
2
qa
qg
qd
4
6
5
7
8
3
qf
qs
RESET
qj
qk
qh
Refer to the pages listed for details.
Instructions in this manual generally describe the
controls on the card remote commander. You can
also use the controls on the main unit if they have
the same or similar names to those on the card
remote commander.
Instructions in this manual generally describe the
controls on the card remote commander. You can
also use the controls on the main unit if they have
the same or similar names to those on the card
remote commander.
A OFF button
To power off/stop the source (press); shut off
completely (press and hold).
completely (press and hold).
B
(Back)/DSPL (Display) button
To return to the previous display/change
display items.
display items.
C SOURCE button
To power on; change the source (Radio/Disc/
AUX)*
AUX)*
1
.
D m (Microphone) button
To activate the karaoke mode.
E Control dial/SOUND/ENTER button
To adjust the volume/adjust a setting (rotate);
open the sound menu/apply a setting (press).
open the sound menu/apply a setting (press).
F Receptor for the card remote
commander
G Display window
H OPEN button
I SEEK +/– buttons
Disc:
To skip a chapter/track/scene/file (press);
reverse/fast-forward disc (press and hold
momentarily); reverse/fast-forward track
(press and hold).*
To skip a chapter/track/scene/file (press);
reverse/fast-forward disc (press and hold
momentarily); reverse/fast-forward track
(press and hold).*
2
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
J MODE button
To select the radio band (FM/MW/LW);
select an auxiliary device.*
select an auxiliary device.*
1
K
(Browse) button
To enter the Quick-BrowZer mode.*
3
L SETUP button
To open the system setup menu.
M Number buttons
Disc:
(1): b REP
(2): SHUF B
(3)/(4): ALBUM –/+ (V/v)
To skip an album/move the cursor
(press); skip albums or folder
continuously (press and hold).*
(press); skip albums or folder
continuously (press and hold).*
4
(6): u (play/pause)
To start/pause playback.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
N AF (Alternative Frequencies)/TA
(Traffic Announcement)/PTY
(Program Type) button
To set AF and TA (press); select PTY (press
and hold) in RDS.
(Program Type) button
To set AF and TA (press); select PTY (press
and hold) in RDS.
O AUX input jack
To connect a portable audio device.
P RESET button
Q Z (eject) button
To eject the disc.
R Disc slot
To insert the disc.
*1 While a CD changer is connected, “CDC” appears
on the display when
(SOURCE) is pressed. You
can switch the CD changer by pressing
(MODE) if
several CD changers are connected.
*2 Operation differs depending on the disc.
*3 When a Super Audio CD/CD/MP3/WMA/JPEG/
*3 When a Super Audio CD/CD/MP3/WMA/JPEG/
DivX is played.
*4 If the changer is connected, operation is different.
Card remote commander RM-X169
Refer to the pages listed for details.
Remove the insulation film before use.
Remove the insulation film before use.
A OFF button
To power off/stop the source (press); shut off
completely (press and hold).
completely (press and hold).
B SOUND button
To open the sound menu.
C VISUAL SETUP button
To open the play mode/visual setup menu.
D SYSTEM SETUP button
To open the system setup menu.
E
(Back)/
O (Return) button
To return to the previous display; return to
the menu on a VCD*
the menu on a VCD*
1
.
qd
1
2
3
4
5
6
7
8
9
qf
qg
qh
qk
ql
qj
q;
qa
qs
F Number buttons
Disc:
To locate a title/chapter/track.
Radio:
To receive stored stations (press); store
stations (press and hold).
To locate a title/chapter/track.
Radio:
To receive stored stations (press); store
stations (press and hold).
G CLEAR button
To delete an entered number.
H DSPL (Display) button
To change display items.
I PLII (Pro Logic II) button
To select a Dolby Pro Logic II mode.
J ATT (Attenuate) button
To attenuate the sound (to cancel, press
again).
again).
K u (Play/Pause) button
To start/pause playback.
L .m/M> buttons
Disc:
To skip a chapter/track/scene/file (press);
reverse/fast-forward disc (press and hold
momentarily); reverse/fast-forward track
(press and hold).*
To skip a chapter/track/scene/file (press);
reverse/fast-forward disc (press and hold
momentarily); reverse/fast-forward track
(press and hold).*
2
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
M DVD playback setting buttons
(AUDIO):
To change the audio language/format.
(For VCD/CD/MP3/WMA, to change the
audio channel.)
(For VCD/CD/MP3/WMA, to change the
audio channel.)
(SUBTITLE):
To change the subtitle language.
(ANGLE):
To change the viewing angle.
(TOP MENU):
To open the top menu on a DVD.
(MENU):
To open the menu on a disc.
N
(Browse)/CAT button
To enter the Quick-BrowZer mode.*
3
(the
CAT button does not work on this model).
O </M/m/, (Cursor)/ENTER buttons
To move the cursor and apply a setting.
P SRC (Source) button
To power on; change the source (Radio/Disc/
AUX)*
AUX)*
4
.
Q MODE button
To select the radio band (FM/MW/LW);
select an auxiliary device*
select an auxiliary device*
4
.
R VOL (Volume) +/– buttons
To adjust the volume.
S m (Microphone) button
To activate the karaoke mode.
*1 When playing with PBC function.
*2 Operation differs depending on the disc.
*3 When a Super Audio CD/CD/MP3/WMA/JPEG/
*2 Operation differs depending on the disc.
*3 When a Super Audio CD/CD/MP3/WMA/JPEG/
DivX is played.
*4 While a CD changer is connected, “CDC” appears
on the display when
(SOURCE) is pressed. You
can switch the CD changer by pressing
(MODE) if
several CD changers are connected.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE) on the main unit is pressed, or a
disc is inserted to activate the unit first.
(DV220EE)
Click on the first or last page to see other MEX-DV2200 / MEX-DV220EE service manuals if exist.