Sony MEX-BT3600U Service Manual ▷ View online
MEX-BT3600U
7
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Canadian and Saudi Arabia models:
Location of controls and basic operations
Main unit
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
The corresponding buttons on the card remote
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
" OFF button
To power off; stop the source.
#
(BROWSE) button
To enter the Quick-BrowZer mode.
$ Control dial/select/
(handsfree)
button
To adjust volume/select search category
To adjust volume/select search category
(rotate); select setup items (press and rotate);
receive/end a call (press).
% SOURCE button
To power on; change the source (Radio/CD/
USB/AUX/Bluetooth audio/Bluetooth
phone).
& Disc slot
Insert the disc (label side up), playback
starts.
' Display window
( USB terminal
To connect to the USB device.
) ;(eject) button
To eject the disc.
*
(front panel release) button
+
(BACK) button
To return to the previous display.
, Receptor for the card remote
commander
- SEEK –/+ buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
BT
BTM
DSPL
L
R
C
S
F
U
H
S
P
E
R
1
2
3
4
5
6
PAUSE
BROWSE
BACK
SEEK
SEEK
MODE
SOURCE
PUSH SELECT /
MIC
AUX
OFF
ALBUM
BLUETOOTH
RB
RE
R
RT
RGRH
RK
RI
RL
RESET
X
RM
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
Bluetooth audio device*
1
:
To skip tracks (press).
. MODE button
To select the radio band (FM/AM); select the
play mode of ATRAC Audio Device.
/ BLUETOOTH button
For Bluetooth signal on/off, pairing.
0 BTM button
To start the BTM function (press and hold).
1 Number buttons
CD/USB:
/ : ALBUM –/+ (during MP3/WMA/
/ : ALBUM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
: REP
: SHUF
: PAUSE*
: SHUF
: PAUSE*
2
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Bluetooth audio device*
1
:
: PAUSE*
2
To pause playback. To cancel, press
again.
Bluetooth phone:
: MIC
: MIC
2 DSPL (display)/SCRL (scroll) button
To change display items (press); scroll the
display item (press and hold).
3 AUX input jack
To connect a portable audio device.
4 RESET button (located behind the front
panel)
5 Microphone
Note
Do not cover the microphone, the handsfree
function may not work properly.
Do not cover the microphone, the handsfree
function may not work properly.
*1 When a Bluetooth audio device (supports
AVRCP of Bluetooth technology) is connected.
Depending on the device, certain operations
may not be available.
Depending on the device, certain operations
may not be available.
*2 When playing back on this unit.
Notes
• When ejecting/inserting a disc, keep any USB
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears,
it cannot be operated with the card remote
commander unless 4063$& on the unit is
commander unless 4063$& on the unit is
pressed, or a disc is inserted to activate the unit
first.
first.
About USB cap
When not using the USB terminal ((), use the
When not using the USB terminal ((), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
Card remote commander
RM-X304
RM-X304
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use.
" OFF button
To power off; stop the source.
# SOURCE button
To power on; change the source (Radio/CD/
USB/AUX/Bluetooth audio/Bluetooth
phone).
$ ()/
() buttons
To control CD/radio/USB/Bluetooth audio,
the same as 4&&,
–/+ on the unit.
Setup, sound setting, etc., can be operated by
.
.
% DSPL (display) button
To change display items.
& VOL (volume) +/– button
To adjust volume.
' ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
( MODE button
To select the radio band (FM/AM); select the
play mode of ATRAC Audio Device.
) SEL (select)/
(handsfree) button
The same as the select button on the unit.
During the Quick-BrowZer mode, 4&-
(select) is inactive.
* . (+)/N (–) buttons
To control CD/USB, the same as
/
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
. N.
. N.
+ SCRL (scroll) button
To scroll the display item.
, Number buttons
To receive stored stations (press); store
stations (press and hold).
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
RB
MEX-BT3600U
8
AEP, Russian and UK models:
Location of controls and basic operations
Main unit
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
The corresponding buttons on the card remote
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
" OFF button
To power off; stop the source.
#
(BROWSE) button
To enter the Quick-BrowZer mode.
$ Control dial/select/
(handsfree)
button
To adjust volume/select search category
To adjust volume/select search category
(rotate); select setup items (press and rotate);
receive/end a call (press).
% SOURCE button
To power on; change the source (Radio/CD/
USB/AUX/Bluetooth audio/Bluetooth
phone).
& Disc slot
Insert the disc (label side up), playback
starts.
' Display window
( USB terminal
To connect to the USB device.
) ;(eject) button
To eject the disc.
*
(front panel release) button
+
(BACK) button
To return to the previous display.
, Receptor for the card remote
commander
- SEEK –/+ buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
BT
DSPL
L
R
C
S
F
U
H
S
P
E
R
1
2
3
4
5
6
PAUSE
BROWSE
BACK
SEEK
SEEK
MODE
SOURCE
PUSH SELECT /
MIC
AUX
OFF
ALBUM
BLUETOOTH
PTY
AF/TA
RB
RE
R
RT
RGRH
RK
RI
RL
RESET
X
RM
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
Bluetooth audio device*
1
:
To skip tracks (press).
. MODE button
To select the radio band (FM/MW/LW);
select the play mode of ATRAC Audio
Device.
/ BLUETOOTH button
For Bluetooth signal on/off, pairing.
0 AF (Alternative Frequencies)/
TA (Traffic Announcement)/
PTY (Program Type) button
To set AF and TA (press); select PTY (press
To set AF and TA (press); select PTY (press
and hold) in RDS.
1 Number buttons
CD/USB:
/ : ALBUM –/+ (during MP3/WMA/
/ : ALBUM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
: REP
: SHUF
: PAUSE*
: SHUF
: PAUSE*
2
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Bluetooth audio device*
1
:
: PAUSE*
2
To pause playback. To cancel, press
again.
Bluetooth phone:
: MIC
: MIC
2 DSPL (display)/SCRL (scroll) button
To change display items (press); scroll the
display item (press and hold).
3 AUX input jack
To connect a portable audio device.
4 RESET button (located behind the front
panel)
5 Microphone
Note
Do not cover the microphone, the handsfree
function may not work properly.
Do not cover the microphone, the handsfree
function may not work properly.
*1 When a Bluetooth audio device (supports
AVRCP of Bluetooth technology) is connected.
Depending on the device, certain operations
may not be available.
Depending on the device, certain operations
may not be available.
*2 When playing back on this unit.
Notes
• When ejecting/inserting a disc, keep any USB
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears,
it cannot be operated with the card remote
commander unless 4063$& on the unit is
commander unless 4063$& on the unit is
pressed, or a disc is inserted to activate the unit
first.
first.
About USB cap
When not using the USB terminal ((), use the
When not using the USB terminal ((), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
Card remote commander
RM-X304
RM-X304
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use.
" OFF button
To power off; stop the source.
# SOURCE button
To power on; change the source (Radio/CD/
USB/AUX/Bluetooth audio/Bluetooth
phone).
$ ()/
() buttons
To control CD/radio/USB/Bluetooth audio,
the same as 4&&,
–/+ on the unit.
Setup, sound setting, etc., can be operated by
.
.
% DSPL (display) button
To change display items.
& VOL (volume) +/– button
To adjust volume.
' ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
( MODE button
To select the radio band (FM/MW/LW);
select the play mode of ATRAC Audio
Device.
) SEL (select)/
(handsfree) button
The same as the select button on the unit.
During the Quick-BrowZer mode, 4&-
(select) is inactive.
* . (+)/N (–) buttons
To control CD/USB, the same as
/
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
. N.
. N.
+ SCRL (scroll) button
To scroll the display item.
, Number buttons
To receive stored stations (press); store
stations (press and hold).
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
RB
MEX-BT3600U
9
E, Mexican and Indian models:
Location of controls and basic operations
Main unit
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
The corresponding buttons on the card remote
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
" OFF button
To power off; stop the source.
#
(BROWSE) button
To enter the Quick-BrowZer mode.
$ Control dial/select/
(handsfree)
button
To adjust volume/select search category
To adjust volume/select search category
(rotate); select setup items (press and rotate);
receive/end a call (press).
% SOURCE button
To power on; change the source (Radio/CD/
USB/AUX/Bluetooth audio/Bluetooth
phone).
& Disc slot
Insert the disc (label side up), playback
starts.
' Display window
( USB terminal
To connect to the USB device.
) ;(eject) button
To eject the disc.
*
(front panel release) button
+
(BACK) button
To return to the previous display.
, Receptor for the card remote
commander
- SEEK –/+ buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
BT
BTM
DSPL
L
R
C
S
F
U
H
S
P
E
R
1
2
3
4
5
6
PAUSE
BROWSE
BACK
SEEK
SEEK
MODE
SOURCE
PUSH SELECT /
MIC
AUX
OFF
ALBUM
BLUETOOTH
RB
RE
R
RT
RGRH
RL
RK
RM
RI
RESET
XB
X
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
Bluetooth audio device*
1
:
To skip tracks (press).
. MODE button
To select the radio band (FM/MW/SW);
select the play mode of ATRAC Audio
Device.
/ BLUETOOTH button
For Bluetooth signal on/off, pairing.
0 BTM button
To start the BTM function (press and hold).
1 Frequency select switch (located on the
bottom of the unit)
See “Frequency select switch” in the
See “Frequency select switch” in the
supplied installation/connections manual.
2 Number buttons
CD/USB:
/ : ALBUM –/+ (during MP3/WMA/
/ : ALBUM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
: REP
: SHUF
: PAUSE*
: SHUF
: PAUSE*
2
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Bluetooth audio device*
1
:
: PAUSE*
2
To pause playback. To cancel, press
again.
Bluetooth phone:
: MIC
: MIC
3 DSPL (display)/SCRL (scroll) button
To change display items (press); scroll the
display item (press and hold).
4 AUX input jack
To connect a portable audio device.
5 RESET button (located behind the front
panel)
6 Microphone
Note
Do not cover the microphone, the handsfree
function may not work properly.
Do not cover the microphone, the handsfree
function may not work properly.
*1 When a Bluetooth audio device (supports
AVRCP of Bluetooth technology) is connected.
Depending on the device, certain operations
may not be available.
Depending on the device, certain operations
may not be available.
*2 When playing back on this unit.
Notes
• When ejecting/inserting a disc, keep any USB
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears,
it cannot be operated with the card remote
commander unless 4063$& on the unit is
commander unless 4063$& on the unit is
pressed, or a disc is inserted to activate the unit
first.
first.
About USB cap
When not using the USB terminal ((), use the
When not using the USB terminal ((), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
Card remote commander
RM-X304
RM-X304
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use.
" OFF button
To power off; stop the source.
# SOURCE button
To power on; change the source (Radio/CD/
USB/AUX/Bluetooth audio/Bluetooth
phone).
$ ()/
() buttons
To control CD/radio/USB/Bluetooth audio,
the same as 4&&,
–/+ on the unit.
Setup, sound setting, etc., can be operated by
.
.
% DSPL (display) button
To change display items.
& VOL (volume) +/– button
To adjust volume.
' ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
( MODE button
To select the radio band (FM/MW/SW);
select the play mode of ATRAC Audio
Device.
) SEL (select)/
(handsfree) button
The same as the select button on the unit.
During the Quick-BrowZer mode, 4&-
(select) is inactive.
* . (+)/N (–) buttons
To control CD/USB, the same as
/
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
. N.
. N.
+ SCRL (scroll) button
To scroll the display item.
, Number buttons
To receive stored stations (press); store
stations (press and hold).
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
RB
MEX-BT3600U
10
Except AEP, Russian and UK models:
L
R
FRONT
AUDIO OUT
SUB REAR
SUB AUDIO OUT
REMOTE
IN
REAR
AUDIO OUT
FRONT
AUDIO OUT
Cautions
Be sure to install this unit in the dashboard of the car
as the rear side of the unit becomes hot during use.
• This unit is designed for negative ground (earth) 12 V
DC operation only.
• Do not get the leads under a screw, or caught in moving
parts (e.g. seat railing).
• Before making connections, turn the car ignition off to
avoid short circuits.
• Connect the yellow and red power input leads only
after all other leads have been connected.
• Run all ground (earth) leads to a common
ground (earth) point.
• Be sure to insulate any loose unconnected leads with
electrical tape for safety.
• Do not cover the ventilation slots or heat sinks of the
unit.
Notes on the power supply lead (yellow)
• When connecting this unit in combination with other
stereo components, the connected car circuit’s rating
must be higher than the sum of each component’s fuse.
• When no car circuits are rated high enough, connect
the unit directly to the battery.
Parts Iist
• The numbers in the list are keyed to those in the
instructions.
• The bracket
and the protection collar are
attached to the unit before shipping. Before mounting
the unit, use the release keys
to remove the bracket
and the protection collar from the unit. For
details, see “Removing the protection collar and the
bracket (
)” on the reverse side of the sheet.
• Keep the release keys
for future use as they
are also necessary if you remove the unit from
your car.
Caution
Handle the bracket
carefully to avoid injuring your
fingers.
Catch
Note
Before installing, make sure that the catches on both sides of
the bracket
are bent inwards 2 mm. If the catches are straight
or bent outwards, the unit will not be installed securely and may
spring out.
Connection example
Notes
• Be sure to connect the ground (earth) lead before connecting
the amplifier.
• The alarm will only sound if the built-in amplifier is used.
Connection diagram
To a metal surface of the car
First connect the black ground (earth) lead, then connect the
yellow and red power supply leads.
To the power antenna (aerial) control lead or
power supply lead of antenna (aerial) booster
amplifier
Notes
• It is not necessary to connect this lead if there is no power
antenna (aerial) or antenna (aerial) booster, or with a
manually-operated telescopic antenna (aerial).
• When your car has a built-in FM/MW/SW antenna (aerial)
in the rear/side glass, see “Notes on the control and power
supply leads.”
To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting any other
system may damage the unit.
To the interface cable of a car telephone
To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch
Notes
• If there is no accessory position, connect to the +12 V
power (battery) terminal which is energized at all times.
Be sure to connect the black ground (earth) lead to a
metal surface of the car first.
• When your car has a built-in FM/MW/SW antenna (aerial)
in the rear/side glass, see “Notes on the control and power
supply leads.”
To the +12 V power terminal which is
energized at all times
Be sure to connect the black ground (earth) lead to a metal
surface of the car first.
Notes on the control and power supply leads
• The power antenna (aerial) control lead (blue) supplies +12 V
DC when you turn on the tuner.
• When your car has built-in FM/MW/SW antenna (aerial) in the
rear/side glass, connect the power antenna (aerial) control
lead (blue) or the accessory power input lead (red) to the
power terminal of the existing antenna (aerial) booster. For
details, consult your dealer.
• A power antenna (aerial) without a relay box cannot be used
with this unit.
Memory hold connection
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
• Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
• Do not connect the ground (earth) lead of this unit to the
negative (–) terminal of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active speakers
(with built-in amplifiers) to the speaker terminals may damage
the unit.
• To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
• Do not connect the unit’s speaker leads to each other.
Note on connection
Note on connection
If speaker and amplifier are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifier are connected correctly.
Precauciones
Asegúrese de instalar la unidad en el tablero del
automóvil, ya que la parte posterior de la unidad se
calienta durante el uso.
• Esta unidad ha sido diseñada para alimentarse sólo con cc
de 12 V de masa negativa.
• No coloque los cables debajo de ningún tornillo, ni los
aprisione con partes móviles (p. ej. los raíles del asiento).
• Antes de realizar las conexiones, desactive el encendido
del automóvil para evitar cortocircuitos.
• Conecte los cables de entrada de alimentación amarillo y
rojo solamente después de haber conectado los demás.
• Conecte todos los cables de conexión a masa a
un punto común.
• Por razones de seguridad, asegúrese de aislar con cinta
aislante los cables sueltos que no estén conectados.
• No cubra las ranuras ni las rejillas de ventilación de la
unidad.
Notas sobre el cable de fuente de alimentación
(amarillo)
• Cuando conecte esta unidad en combinación con otros
componentes estéreo, la capacidad nominal del circuito
conectado del automóvil debe ser superior a la suma del
fusible de cada componente.
• Si no hay circuitos del automóvil con capacidad nominal
suficientemente alta, conecte la unidad directamente a la
batería.
Lista de componentes
• Los números de la lista corresponden a los de las
instrucciones.
• La unidad se comercializa con el soporte
y el marco
de protección
ya colocados. Antes de montarla,
utilice las llaves de liberación
para extraer el
soporte
y el marco de protección de la misma.
Para obtener más información, consulte “Extracción
del marco de protección y del soporte (
)”.
• Conserve las llaves de liberación
para
utilizarlas en el futuro, ya que también las
necesitará si retira la unidad del automóvil.
Precaución
Tenga mucho cuidado al manipular el soporte
para
evitar posibles lesiones en los dedos.
Enganche
Nota
Antes de instalar la unidad, compruebe que los enganches de
ambos lados del soporte
están doblados hacia adentro 2 mm.
Si no lo están o están doblados hacia afuera, la unidad no se
instalará correctamente y puede saltar.
Ejemplo de conexiones
Notas
• Asegúrese de conectar primero el cable de conexión a masa
antes de realizar la conexión del amplificador.
• La alarma sonará únicamente si se utiliza el amplificador
incorporado.
Diagrama de conexión
A una superficie metálica del automóvil
Conecte primero el cable de conexión a masa negro, y después
los cables amarillo, y rojo de entrada de alimentación.
Al cable de control de la antena motorizada
o al cable de fuente de alimentación del
amplificador de señal de la antena
Notas
• Si no se dispone de antena motorizada ni de amplificador
de antena, o se utiliza una antena telescópica accionada
manualmente, no será necesario conectar este cable.
• Si el automóvil dispone de una antena de FM/MW/SW
incorporada en el cristal trasero o lateral, consulte “Notas
sobre los cables de control y de fuente de alimentación”.
A AMP REMOTE IN de un amplificador de
potencia opcional
Esta conexión es sólo para amplificadores. La conexión de
cualquier otro sistema puede dañar la unidad.
Al cable de interfaz de un teléfono para
automóvil
Al terminal de alimentación de +12 V que
recibe energía en la posición de accesorio del
interruptor de la llave de encendido
Notas
• Si no hay posición de accesorio, conéctelo al terminal de
alimentación (batería) de +12 V que recibe energía sin
interrupción.
Asegúrese de conectar primero el cable de conexión a masa
negro a una superficie metálica del automóvil.
• Si el automóvil dispone de una antena de FM/MW/SW
incorporada en el cristal trasero o lateral, consulte “Notas
sobre los cables de control y de fuente de alimentación”.
Al terminal de alimentación de +12 V que recibe
energía sin interrupción
Asegúrese de conectar primero el cable de conexión a masa
negro a una superficie metálica del automóvil.
Notas sobre los cables de control y de fuente de alimentación
• El cable de control de la antena motorizada (azul) suministrará cc
de + 12 V cuando conecte la alimentación del sintonizador.
• Si el automóvil dispone de una antena de FM/MW/SW incorporada
en el cristal trasero o lateral, conecte el cable de control de antena
motorizada (azul) o el cable de entrada de alimentación auxiliar
(rojo) al terminal de alimentación del amplificador de antena
existente. Para obtener más información, consulte a su distribuidor.
• Con esta unidad no es posible utilizar una antena motorizada sin
caja de relé.
Conexión para protección de la memoria
Si conecta el cable de entrada de alimentación amarillo, el circuito
de la memoria recibirá siempre alimentación, aunque apague el
interruptor de encendido.
Notas sobre la conexión de los altavoces
Notas sobre la conexión de los altavoces
• Antes de conectar los altavoces, desconecte la alimentación de la
unidad.
• Utilice altavoces con una impedancia de 4 a 8
Ω con la capacidad
de potencia adecuada para evitar que se dañen.
• No conecte los terminales de altavoz al chasis del automóvil, ni
conecte los terminales del altavoz derecho con los del izquierdo.
• No conecte el cable de conexión a masa de esta unidad al
terminal negativo (–) del altavoz.
• No intente conectar los altavoces en paralelo.
• Conecte solamente altavoces pasivos. Si conecta altavoces
activos (con amplificadores incorporados) a los terminales de
altavoz, puede dañar la unidad.
• Para evitar fallas de funcionamiento, no utilice los cables de altavoz
incorporados instalados en el automóvil si la unidad comparte un
cable negativo común (–) para los altavoces derecho e izquierdo.
• No conecte los cables de altavoz de la unidad entre sí.
Nota sobre la conexión
Nota sobre la conexión
Si el altavoz y el amplificador no están conectados correctamente,
aparecerá “FAILURE” en la pantalla. En tal caso compruebe la
conexión de ambos dispositivos.
from car antenna (aerial)
desde la antena del automóvil
desde la antena del automóvil
REAR
AUDIO OUT
SUB AUDIO OUT
FRONT AUDIO OUT
AMP REM
Max. supply current 0.3 A
Corriente máx. de alimentación de 0,3 A
Corriente máx. de alimentación de 0,3 A
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
Blue/white striped
Con rayas azules y blancas
Con rayas azules y blancas
Red
Rojo
Rojo
Yellow
Amarillo
Amarillo
White
Blanco
Blanco
Green
Verde
Verde
Purple
Morado
Morado
White/black striped
Con rayas blancas y negras
Con rayas blancas y negras
Grey/black striped
Con rayas grises y negras
Con rayas grises y negras
Green/black striped
Con rayas verdes y negras
Con rayas verdes y negras
Grey
Gris
Gris
Left
Izquierdo
Izquierdo
Right
Derecho
Derecho
Left
Izquierdo
Izquierdo
Right
Derecho
Derecho
ANT REM
Black
Negro
Negro
Blue
Azul
Azul
Max. supply current 0.1 A
Corriente máx. de alimentación de 0,1 A
Purple/black striped
Con rayas moradas y negras
Con rayas moradas y negras
*
1
*
1
ATT
Light blue
Azul celeste
Azul celeste
*
2
*
1
RCA pin cord (not supplied)
*
2
Insert with the cord upwards.
*
1
Cable con terminales RCA
(no suministrado)
*
2
Insertar con el cable hacia arriba.
*
1
Click on the first or last page to see other MEX-BT3600U service manuals if exist.