Sony MEX-5DI Service Manual ▷ View online
3
MEX-5DI
Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable
CDs)
CDs)
This unit can play the following discs:
Type of discs
Label on the disc
Audio CD
MP3 files
• Some CD-Rs/CD-RWs (depending on the equipment used for
its recording or the condition of the disc) may not play on this
unit.
unit.
• You cannot play a CD-R/CD-RW that is not finalized∗.
• You can play MP3 files recorded on CD-ROMs, CD-Rs, and
• You can play MP3 files recorded on CD-ROMs, CD-Rs, and
CD-RWs.
• A CD-R/CD-RW to which a session can be added can be played.
∗ A process necessary for a recorded CD-R/CD-RW disc to be
played on the audio CD player.
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
as shown below.
• Connect the MAIN board (CN901) and the DIGITAL board
(CN1012) with the extension cable (Part No. J-2502-068-1).
NOTE FOR THE OPENING OF THE FRONT PANEL
In this set, the front panel is lowered to below the bottom face when
it is opened.
When servicing the set, place it on a stand having a height of about
2 cm.
it is opened.
When servicing the set, place it on a stand having a height of about
2 cm.
stand
MAIN BOARD CN901
DIGITAL BOARD CN1012
FORCED FRONT PANEL OPEN/CLOSE
The front panel is forced to OPEN/CLOSE at the timing that the
power (ACC) is turned off.
If the OPEN/CLOSE button for the front panel is not effective, the
following method is used:
power (ACC) is turned off.
If the OPEN/CLOSE button for the front panel is not effective, the
following method is used:
With the front panel open: The front panel is closed when ACC is
switched from ON to OFF edge.
With the front panel closed: The front panel is opened when ACC
is switched from ON to OFF edge.
4
TABLE OF CONTENTS
1. GENERAL
Location of Controls ................................................................ 5
Connections ............................................................................. 6
Connections ............................................................................. 6
2. DISASSEMBLY
2-1. Front Panel Assy ................................................................. 9
2-2. Sub Panel (CD) Assy ........................................................... 9
2-3. CD Mechanism Block ....................................................... 10
2-4. Digital Board ..................................................................... 10
2-5. Cam Block Assy, Motor Block Assy ................................. 11
2-6. Main Board ....................................................................... 11
2-7. Fan, Chassis Back ............................................................. 12
2-8. Mechanism Block (M) Assy .............................................. 12
2-9. Tray (UM) Assy ................................................................ 13
2-10. MD Assy ........................................................................... 13
2-11. Servo Board ....................................................................... 14
2-12. Optical Pick-up Block ....................................................... 14
2-2. Sub Panel (CD) Assy ........................................................... 9
2-3. CD Mechanism Block ....................................................... 10
2-4. Digital Board ..................................................................... 10
2-5. Cam Block Assy, Motor Block Assy ................................. 11
2-6. Main Board ....................................................................... 11
2-7. Fan, Chassis Back ............................................................. 12
2-8. Mechanism Block (M) Assy .............................................. 12
2-9. Tray (UM) Assy ................................................................ 13
2-10. MD Assy ........................................................................... 13
2-11. Servo Board ....................................................................... 14
2-12. Optical Pick-up Block ....................................................... 14
3. PHASE ALIGNMENT
3-1. Gear (Cam L) .................................................................... 15
3-2. Gear (Cam R) .................................................................... 15
3-2. Gear (Cam R) .................................................................... 15
4. DIAGRAMS
4-1. Note for Replacement of Digital Board ............................ 16
4-2. IC Pin Descriptions ........................................................... 17
4-3. Block Diagram –CD Section– ........................................... 24
4-4. Block Diagram –Tuner Section– ....................................... 25
4-5. Block Diagram –Display Section– .................................... 26
4-6. Circuit Boards Location .................................................... 27
4-7. Printed Wiring Board –CD Mechanism Section– ............. 28
4-8. Schematic Diagram –CD Mechanism Section (1/2)– ....... 30
4-9. Schematic Diagram –CD Mechanism Section (2/2)– ....... 31
4-10. Printed Wiring Boards –Main Section– ............................ 32
4-11. Schematic Diagram –Main Section (1/4)– ........................ 34
4-12. Schematic Diagram –Main Section (2/4)– ........................ 35
4-13. Schematic Diagram –Main Section (3/4)– ........................ 36
4-14. Schematic Diagram –Main Section (4/4)– ........................ 37
4-15. Printed Wiring Board –Display Section– .......................... 38
4-16. Schematic Diagram –Display Section– ............................. 39
4-2. IC Pin Descriptions ........................................................... 17
4-3. Block Diagram –CD Section– ........................................... 24
4-4. Block Diagram –Tuner Section– ....................................... 25
4-5. Block Diagram –Display Section– .................................... 26
4-6. Circuit Boards Location .................................................... 27
4-7. Printed Wiring Board –CD Mechanism Section– ............. 28
4-8. Schematic Diagram –CD Mechanism Section (1/2)– ....... 30
4-9. Schematic Diagram –CD Mechanism Section (2/2)– ....... 31
4-10. Printed Wiring Boards –Main Section– ............................ 32
4-11. Schematic Diagram –Main Section (1/4)– ........................ 34
4-12. Schematic Diagram –Main Section (2/4)– ........................ 35
4-13. Schematic Diagram –Main Section (3/4)– ........................ 36
4-14. Schematic Diagram –Main Section (4/4)– ........................ 37
4-15. Printed Wiring Board –Display Section– .......................... 38
4-16. Schematic Diagram –Display Section– ............................. 39
5. EXPLODED VIEWS
5-1. Chassis Section ................................................................. 46
5-2. Digital Board Section ........................................................ 47
5-3. Cam Section ...................................................................... 48
5-4. Main Board Section .......................................................... 49
5-5. Front panel Assy Section ................................................... 50
5-6. CD Mechanism Section (1) ............................................... 51
5-7. CD Mechanism Section (2) ............................................... 52
5-8. CD Mechanism Deck Section ........................................... 53
5-2. Digital Board Section ........................................................ 47
5-3. Cam Section ...................................................................... 48
5-4. Main Board Section .......................................................... 49
5-5. Front panel Assy Section ................................................... 50
5-6. CD Mechanism Section (1) ............................................... 51
5-7. CD Mechanism Section (2) ............................................... 52
5-8. CD Mechanism Deck Section ........................................... 53
6. ELECTRICAL PARTS LIST
........................................ 54
MEX-5DI
5
MEX-5DI
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
(US, Canadian Model)
(AEP, UK, E Model)
6
MEX-5DI
Connections