Sony CDX-M600 / CDX-M600R / CDX-M650 Service Manual ▷ View online
21
SECTION 2
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
2-1. FRONT PANEL ASSY (NORMAL)
2-2. FRONT PANEL ASSY (INOPERATIVE)
1
Turn on the power and open the front panel.
2
screw (panel)
stand
4
screw (panel)
5
spacer (arm)
3
spacer (arm)
6
front panel assy
(Take care not to
pull the flexible
board excessively.)
pull the flexible
board excessively.)
flexible board
9
Lift the cam (R) assy
slightly to make a play.
6
PTT 2.6x6
5
PTT 2.6x6
1
screw (panel)
flexible board
qa
qs
front panel assy
(Take care not to pull the
flexible board excessively.)
3
screw (panel)
0
Lift the motor block assy
slightly to make a play.
7
PTT 2.6x6
8
PTT 2.6x6
4
spacer (arm)
2
spacer (arm)
22
2-3. CD MECHANISM BLOCK, FLEXIBLE BOARD
2-4. SUB PANEL (CD) SUB ASSY
2
PTT 2.6x4
4
CNP701
1
PTT 2.6x6
3
PTT 2.6x4
5
CD mechanism block
7
bracket (CD)
6
PTT 2.6x6
8
cover (flexible)
0
flexible board
9
CNP802
Note: When installing
the flexible board,
make the board slack
make the board slack
as illustrated.
3
PTT 2.6x6
6
sub panel (CD) sub assy
2
PTT 2.6 x6
5
claw
1
CNP805
4
claw
23
1
PTT 2.6x6
4
PTT 2.6x6
5
motor block assy
2
cam (R) assy
3
CNP902
A
Note: Install the cam (R) assy with
the cam fully rotated in the
direction of the arrow
the cam fully rotated in the
direction of the arrow
A
.
2-6. MAIN BOARD
2-5. MOTOR BLOCK ASSY, CAM (R) ASSY
Note : Install the motor block assy and cam (R) assy in this roder.
For phase alignment between cams (L) and (R), see page 28 and 30.
4
PTT 2.6x6
ground point
5
PTT 2.6x6
ground point
1
PTT 2.6x8
6
MAIN board
3
PTT 2.6x8
2
PTT 2.6x8
24
2-7. HEAT SINK
2-8. CHASSIS (T) SUB ASSY
5
heat sink
1
PTT 2.6x8
3
PTT 2.6x8
4
PTT 2.6x8
2
PTT 2.6x12
4
chassis (T) sub assy
3
P 2x3
2
P 2x3
1
Unsolder the
lead wires.
black
red
white
Click on the first or last page to see other CDX-M600 / CDX-M600R / CDX-M650 service manuals if exist.