Sony CDX-GT660UE / CDX-GT660UP / CDX-GT660UV / CDX-GT662UE / CDX-GT710UV / CDX-GT717UV Service Manual ▷ View online
CDX-GT660UE/GT660UP/GT660UV/GT662UE/GT710UV/GT717UV
14
3-6. SERVO BOARD
–
CD mechanism deck bottom side view
–
–
CD mechanism deck bottom side view
–
6 SERVO board
2 toothed lock screw
(M1.7
u 2.5)
5 optical pick-up (16 core)
(CN101)
2 toothed lock screw
(M1.7
u 2.5)
3 claw
4 claw
CD mechanism deck
SERVO board
1 Remove the eleven solders.
GRY
YEL
BLU
ORG
RED
BLK
RED
WHT
BLK
RED
WHT
6 SERVO board
3 claw
4 claw
SERVO board
2 toothed lock screw
(M1.7
u 2.5)
2 toothed lock screw
(M1.7
u 2.5)
1 Remove the eleven solders.
GRY
YEL
BLU
ORG
RED
BLK
RED
WHT
BLK
RED
WHT
5 optical pick-up (16 core)
(CN101)
CD mechanism deck
Note: In this unit, the complete SERVO board has been changed in the
midway of production. When replacing the complete SERVO
board, refer to “ABOUT THE MG-101CA-188 OF FORMER
AND NEW” on page 6.
board, refer to “ABOUT THE MG-101CA-188 OF FORMER
AND NEW” on page 6.
• Former type
• New type
Ver. 1.1
CDX-GT660UE/GT660UP/GT660UV/GT662UE/GT710UV/GT717UV
15
3-7. CHASSIS (T) SUB ASSY
3-8. ROLLER ARM ASSY
3 chassis (T) sub assy
2 claw
1 two screws
(M1.7
u 2.5)
1 two screws
(M1.7
u 2.5)
3 washer
4 gear (HRA)
5 roller arm assy
1 spring (RAL)
2 spring (RAR)
CDX-GT660UE/GT660UP/GT660UV/GT662UE/GT710UV/GT717UV
16
3-9. CHASSIS (OP) ASSY
3-10. CHUCKING ARM SUB ASSY
6 two coil springs (damper) (natural)
7 coil spring (damper) (blue)
8 chassis (OP) assy
5
1 tension spring (KF)
2 gear (LE1)
3 lever (D)
4 slider (R)
3 chucking arm sub assy
2
1 spring
Note 1: Have this portion receive the chassis.
Note 1: Have this portion receive the chassis.
Note 2: Be careful not to touch the turn table.
CDX-GT660UE/GT660UP/GT660UV/GT662UE/GT710UV/GT717UV
CDX-GT660UE/GT660UP/GT660UV/GT662UE/GT710UV/GT717UV
17
17
3-12. OPTICAL PICK-UP SECTION
3-13. OPTICAL PICK-UP
1
2 optical pick-up section
Note: Be careful not to touch the lens and hologram
terminal when removing the optical pick-up section.
–
bottom side view
–
There is space at the end of the
leaf spring (OPS) to avoid
contact with the slide.
leaf spring (OPS) to avoid
contact with the slide.
5 optical pick-up
4 lead screw assy
Prevent the end of the
leaf spring (OPS) from being
in contact with the OP slide base.
leaf spring (OPS) from being
in contact with the OP slide base.
Prevent the end of the
leaf spring (OPS) from being
in contact with the OP slide base.
leaf spring (OPS) from being
in contact with the OP slide base.
1 tapping screw
(P
1.4)
2 leaf spring (OPS)
3 rack
–
bottom side view
–
Notes for Assembly
3-11. SLED MOTOR ASSY
3 sled motor assy
sled motor assy
1 spring
spring
stand
stand
turn table
2 three serration screws
(M2
u 3)
three
serration
screws
(M2
u 3)
bearing (F)
bearing (R)
Note 1: Place the stand with care not to touch the turn table.
Note 2: Never remove these parts since they were adjusted.
Note 3: Take care to prevent the chassis from being bent
when tightening the three machine screws.
1RWHIRU$VVHPEO\
–
ERWWRPVLGHYLHZ
–
–
ERWWRPVLGHYLHZ
–
–
ERWWRPVLGHYLHZ
–
Click on the first or last page to see other CDX-GT660UE / CDX-GT660UP / CDX-GT660UV / CDX-GT662UE / CDX-GT710UV / CDX-GT717UV service manuals if exist.