Sony CDX-GT610U / CDX-GT616U / CDX-GT617UE Service Manual ▷ View online
5
CDX-GT610U/GT616U/GT617UE
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
• LOCATION OF CONTROLS
• CDX-GT610U/GT616U
• CDX-GT610U/GT616U
• CDX-GT617UE
6
Location of controls and basic operations
Main unit
Front panel removed
Card remote commander
RM-X151
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
OFF button
To power off; stop the source.
B
DSO button 4
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
The larger the number, the more enhanced
the effect.
C
Volume control dial/select button 12
To adjust volume (rotate); select setup items
(press and rotate).
(press and rotate).
D
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/USB/AUX).
E
Display window
F
USB terminal 11
To connect to the USB device.
G
OPEN button 5
OFF
OPEN
DSPL
AF/TA
SEEK
SEEK
PAUSE
GP/ALBM
REP
SHUF
BBE MP
PUSH SELECT
1
2
3
4
5
6
MODE
DSO
PTY
EQ3
SOURCE
1
q;
9
qa
qd
qg
qs
2
qf
4
5
8
6
7
3
CDX-GT616U
CDX-GT610U
CDX-GT610U
RESET
qj
qk
qh
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
4
ws
qs
1
ql
qd
wa
w;
wg
wd
wf
7
H
EQ3 (equalizer) button 12
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
I
Receptor for the card remote
commander
commander
J
SEEK –/+ buttons
CD/MD*
1
/USB*
2
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
K
PTY (Program Type) button 10
To select PTY in RDS.
L
MODE button 8, 11, 13
To select the radio band (FM/MW/LW);
select the unit*
select the unit*
3
; select the play mode*
4
.
M
DSPL (display) button 8, 9, 11
To change display items.
N
Number buttons
CD/MD*
1
/USB*
2
:
(1)/(2):
GP
*
5
/ALBM
*
6
–/+
To skip albums (press); skip albums
continuously (press and hold).*
continuously (press and hold).*
7
(3):
REP 8, 11, 13
(4):
SHUF 8, 11, 13
(5):
BBE MP
*
8
2
To activate the BBE MP function, set
“BBE MP-ON.” To cancel, set “BBE
MP-OFF.”
“BBE MP-ON.” To cancel, set “BBE
MP-OFF.”
(6):
PAUSE
*
8
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
O
AF (Alternative Frequencies)/TA
(Traffic Announcement) button 9
(Traffic Announcement) button 9
To set AF and TA in RDS.
P
RESET button 4
Q Z
(eject) button 5
To eject the disc.
R
Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql <
(
.
)/
,
(
>
) buttons
To control CD/radio/MD/USB, the same as
(SEEK) –/+ on the unit.
(SEEK) –/+ on the unit.
w;
VOL (volume) +/– button
To adjust volume.
wa
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
ws
SEL (select) button
The same as the select button on the unit.
wd M
(+)/
m
(–) buttons
To control CD, the same as (1)/(2) (GP/
ALBM –/+) on the unit.
ALBM –/+) on the unit.
wf
SCRL (scroll) button 8, 11
To scroll the display item.
wg
Number buttons
To receive stored stations (press); store
stations (press and hold).
stations (press and hold).
*1
When an MD changer is connected.
*2
When a USB device is connected.
*3
When a CD/MD changer is connected.
*4
When an ATRAC Audio Device is connected.
*5
When an ATRAC CD is played.
*6
When an MP3/WMA/AAC is played.
*7
If the changer/USB is connected, the operation is
different, see page 13.
different, see page 13.
*8
When playing back on this unit and a USB device.
Notes
•
•
When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
devices disconnected to avoid damage to the disc.
•
If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless
cannot be operated with the card remote
commander unless
(SOURCE)
on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
About USB cap
When not using the USB terminal (
When not using the USB terminal (
F
), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
6
Location of controls and basic operations
Main unit
Front panel removed
Card remote commander
RM-X151
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
OFF button
To power off; stop the source.
B
DSO button 4
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
The larger the number, the more enhanced
the effect.
C
Volume control dial/select button 12
To adjust volume (rotate); select setup items
(press and rotate).
(press and rotate).
D
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/USB/AUX).
E
Display window
F
USB terminal 11
To connect to the USB device.
G
OPEN button 5
OFF
OPEN
DSPL
AF/TA
SEEK
SEEK
PAUSE
GP/ALBM
REP
SHUF
BBE MP
PUSH SELECT
1
2
3
4
5
6
MODE
DSO
PTY
EQ3
SOURCE
1
q;
9
qa
qd
qg
qs
2
qf
4
5
8
6
7
3
CDX-GT617UE
RESET
qj
qk
qh
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
4
ws
qs
1
ql
qd
wa
w;
wg
wd
wf
7
H
EQ3 (equalizer) button 12
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
I
Receptor for the card remote
commander
commander
J
SEEK –/+ buttons
CD/MD*
1
/USB*
2
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
K
PTY (Program Type) button 10
To select PTY in RDS.
L
MODE button 8, 11, 13
To select the radio band (FM/MW/LW);
select the unit*
select the unit*
3
; select the play mode*
4
.
M
DSPL (display) button 8, 9, 11
To change display items.
N
Number buttons
CD/MD*
1
/USB*
2
:
(1)/(2):
GP
*
5
/ALBM
*
6
–/+
To skip albums (press); skip albums
continuously (press and hold).*
continuously (press and hold).*
7
(3):
REP 8, 11, 13
(4):
SHUF 8, 11, 13
(5):
BBE MP
*
8
2
To activate the BBE MP function, set
“BBE MP-ON.” To cancel, set “BBE
MP-OFF.”
“BBE MP-ON.” To cancel, set “BBE
MP-OFF.”
(6):
PAUSE
*
8
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
O
AF (Alternative Frequencies)/TA
(Traffic Announcement) button 9
(Traffic Announcement) button 9
To set AF and TA in RDS.
P
RESET button 4
Q Z
(eject) button 5
To eject the disc.
R
Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql <
(
.
)/
,
(
>
) buttons
To control CD/radio/MD/USB, the same as
(SEEK) –/+ on the unit.
(SEEK) –/+ on the unit.
w;
VOL (volume) +/– button
To adjust volume.
wa
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
ws
SEL (select) button
The same as the select button on the unit.
wd M
(+)/
m
(–) buttons
To control CD, the same as (1)/(2) (GP/
ALBM –/+) on the unit.
ALBM –/+) on the unit.
wf
SCRL (scroll) button 8, 11
To scroll the display item.
wg
Number buttons
To receive stored stations (press); store
stations (press and hold).
stations (press and hold).
*1
When an MD changer is connected.
*2
When a USB device is connected.
*3
When a CD/MD changer is connected.
*4
When an ATRAC Audio Device is connected.
*5
When an ATRAC CD is played.
*6
When an MP3/WMA/AAC is played.
*7
If the changer/USB is connected, the operation is
different, see page 13.
different, see page 13.
*8
When playing back on this unit and a USB device.
Notes
•
•
When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
devices disconnected to avoid damage to the disc.
•
If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless
cannot be operated with the card remote
commander unless
(SOURCE)
on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 17.
About USB cap
When not using the USB terminal (
When not using the USB terminal (
F
), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
6
CDX-GT610U/GT616U/GT617UE
• CONNECTIONS
• CDX-GT610U/GT616U
• CDX-GT610U/GT616U
AUDIO OUT
FRONT
AUDIO OUT
REAR
SUB OUT (MONO)
BUS AUDIO IN
BUS CONTROL IN
BUS AUDIO IN
BUS CONTROL IN
A
B
*
not supplied
nicht mitgeliefert
non fourni
non in dotazione
niet bijgeleverd
non fourni
non in dotazione
niet bijgeleverd
Source selector
*
Signalquellenwähler
*
Sélecteur de source
*
Selettore di fonte
*
Geluidsbronkiezer
*
XA-C40
Voorbeeldaansluitingen
Opmerkingen (
2
-A)
•
Sluit eerst de aarddraad aan voordat u de versterker aansluit.
•
U hoort de pieptoon alleen als de ingebouwde versterker wordt
gebruikt.
gebruikt.
Tip (
2
-B- )
Om twee of meer CD/MD-wisselaars aan te sluiten, hebt u de
geluidsbronkiezer XA-C40 (niet bijgeleverd) nodig.
geluidsbronkiezer XA-C40 (niet bijgeleverd) nodig.
Exemple de raccordement
Remarques (
2
-A)
•
Raccordez d’abord le câble de mise à la masse avant de
connecter l’amplifi cateur.
connecter l’amplifi cateur.
•
L’alarme est émise uniquement lorsque l’amplifi cateur intégré
est utilisé.
est utilisé.
Conseil (
2
-B- )
Dans le cas du raccordement de deux changeurs de CD/MD
ou plus, le sélecteur de source XA-C40 (non fourni) est
indispensable.
ou plus, le sélecteur de source XA-C40 (non fourni) est
indispensable.
Anschlussbeispiel
Hinweise (
2
-A)
•
Schließen Sie unbedingt zuerst das Massekabel an, bevor Sie
den Verstärker anschließen.
den Verstärker anschließen.
•
Der Warnton wird nur ausgegeben, wenn der integrierte
Verstärker verwendet wird.
Verstärker verwendet wird.
Tipp (
2
-B- )
Zum Anschließen von zwei oder mehr CD/MD-Wechslern wird
der Signalquellenwähler XA-C40 (nicht mitgeliefert) benötigt.
der Signalquellenwähler XA-C40 (nicht mitgeliefert) benötigt.
Esempio di collegamento
Note (
2
-A)
•
Assicurarsi di collegare il cavo di terra prima di collegare
l’apparecchio all’amplifi catore.
l’apparecchio all’amplifi catore.
•
L’allarme viene emesso solo se è in uso l’amplifi catore
incorporato.
incorporato.
Suggerimento (
2
-B- )
Per collegare due o più cambia CD/MD, occorre utilizzare il
selettore di fonte XA-C40 (non in dotazione).
selettore di fonte XA-C40 (non in dotazione).
Connection example
Notes (
2
-A)
•
Be sure to connect the ground (earth) lead before connecting
the amplifi er.
the amplifi er.
•
The alarm will only sound if the built-in amplifi er is used.
Tip (
2
-B- )
For connecting two or more CD/MD changers, the source
selector XA-C40 (not supplied) is necessary.
selector XA-C40 (not supplied) is necessary.
7
CDX-GT610U/GT616U/GT617UE
L
R
AUDIO
OUT
REAR
AUDIO
OUT
FRONT
BUS
AUDIO
IN
5
7
4
8
1
3
5
7
2
4
6
8
A
B
6
AUDIO OUT
REAR
BUS
CONTROL IN
REMOTE
IN
AUDIO OUT
FRONT
BUS AUDIO IN/
AUX IN
*
3
SUB OUT (MONO)
*
1
from car antenna (aerial)
von Autoantenne
de l’antenne de la voiture
dall’antenna dell’auto
van een auto-antenne
Fuse (10 A)
Sicherung (10 A)
Fusible (10 A)
Fusibile (10 A)
Zekering (10 A)
Sicherung (10 A)
Fusible (10 A)
Fusibile (10 A)
Zekering (10 A)
AMP REM
Light blue
Hellblau
Bleu ciel
Azzurro
Lichtblauw
Hellblau
Bleu ciel
Azzurro
Lichtblauw
Blue/white striped
Blauweiß gestreift
Rayé bleu/blanc
Rigato blu e bianco
Blauw/wit gestreept
Blauweiß gestreift
Rayé bleu/blanc
Rigato blu e bianco
Blauw/wit gestreept
from the car’s power connector
vom Stromanschluss des Fahrzeugs
du connecteur d’alimentation de la voiture
dal connettore di alimentazione dell’auto
van de autovoedingsstekker
vom Stromanschluss des Fahrzeugs
du connecteur d’alimentation de la voiture
dal connettore di alimentazione dell’auto
van de autovoedingsstekker
ATT
See “Power connection diagram” on the reverse side for details.
Näheres dazu fi nden Sie im „Stromanschlussdiagramm“. Blättern
Sie dazu bitte um.
Sie dazu bitte um.
Voir le « Schéma de raccordement d’alimentation » au verso pour
plus de détails.
plus de détails.
Per ulteriori informazioni, vedere “Diagramma dei collegamenti di
alimentazione” che si trova sul retro.
alimentazione” che si trova sul retro.
Zie "Voedingsaansluitschema" op de achterkant voor meer details.
Max. supply current 0.3 A
max. Versorgungsstrom 0,3 A
Courant d’alimentation maximum 0,3 A
Alimentazione massima fornita 0,3 A
Max. voedingsstroom 0,3 A
max. Versorgungsstrom 0,3 A
Courant d’alimentation maximum 0,3 A
Alimentazione massima fornita 0,3 A
Max. voedingsstroom 0,3 A
Negative polarity positions 2, 4, 6, and 8 have striped leads.
An den negativ gepolten Positionen 2, 4, 6 und 8 befi nden sich gestreifte Adern.
Les positions de polarité négative 2, 4, 6 et 8 sont dotées de cordons rayés.
Le posizioni a polarità negativa 2, 4, 6 e 8 hanno cavi rigati.
De posities voor negatieve polariteit (2, 4, 6 en 8) hebben gestreepte kabels.
An den negativ gepolten Positionen 2, 4, 6 und 8 befi nden sich gestreifte Adern.
Les positions de polarité négative 2, 4, 6 et 8 sont dotées de cordons rayés.
Le posizioni a polarità negativa 2, 4, 6 e 8 hanno cavi rigati.
De posities voor negatieve polariteit (2, 4, 6 en 8) hebben gestreepte kabels.
1
Purple
Violett
Mauve
Violett
Mauve
Viola
Paars
+
Speaker, Rear, Right
Lautsprecher hinten rechts
Haut-parleur, arrière, droit
Diffusore, posteriore, destro
Luidspreker, achter, rechts
5
White
Weiß
Blanc
Bianco
Wit
+
Speaker, Front, Left
Lautsprecher vorne links
Haut-parleur, avant, gauche
Diffusore, anteriore, sinistro
Luidspreker, voor, links
2
–
Speaker, Rear, Right
Lautsprecher hinten rechts
Haut-parleur, arrière, droit
Diffusore, posteriore, destro
Luidspreker, achter, rechts
6
–
Speaker, Front, Left
Lautsprecher vorne links
Haut-parleur, avant, gauche
Diffusore, anteriore, sinistro
Luidspreker, voor, links
3
Gray
Grau
Grau
Gris
Grigio
Grijs
+
Speaker, Front, Right
Lautsprecher vorne rechts
Haut-parleur, avant, droit
Diffusore, anteriore, destro
Luidspreker, voor, rechts
7
Green
Grün
Vert
Verde
Groen
+
Speaker, Rear, Left
Lautsprecher hinten links
Haut-parleur, arrière, gauche
Diffusore, posteriore, sinistro
Luidspreker, achter, links
4
–
Speaker, Front, Right
Lautsprecher vorne rechts
Haut-parleur, avant, droit
Diffusore, anteriore, destro
Luidspreker, voor, rechts
8
–
Speaker, Rear, Left
Lautsprecher hinten links
Haut-parleur, arrière, gauche
Diffusore, posteriore, sinistro
Luidspreker, achter, links
*
2
Supplied with the CD/MD changer
Mit dem CD/MD-Wechsler geliefert
Fourni avec le changeur de CD/MD
In dotazione con il cambia CD/MD
Geleverd met de CD/MD-wisselaar
Mit dem CD/MD-Wechsler geliefert
Fourni avec le changeur de CD/MD
In dotazione con il cambia CD/MD
Geleverd met de CD/MD-wisselaar
Source selector
(not supplied)
Signalquellenwähler
(nicht mitgeliefert)
Sélecteur de source
(non fourni)
Selettore di fonte
(non in dotazione)
Geluidsbronkiezer
Geluidsbronkiezer
(niet bijgeleverd)
XA-C40
from the car’s speaker connector
vom Lautsprecheranschluss des Fahrzeugs
du connecteur de haut-parleur de la voiture
dal connettore del diffusore dellíauto
van de autoluidsprekerstekker
vom Lautsprecheranschluss des Fahrzeugs
du connecteur de haut-parleur de la voiture
dal connettore del diffusore dellíauto
van de autoluidsprekerstekker
Positions 1, 2 and 3 do not have pins.
An Position 1, 2 und 3 befi nden sich keine Stifte.
Les positions 1, 2 et 3 ne comportent pas de broches.
Le posizioni 1, 2 e 3 non hanno piedini.
De posities 1, 2 en 3 hebben geen pins.
An Position 1, 2 und 3 befi nden sich keine Stifte.
Les positions 1, 2 et 3 ne comportent pas de broches.
Le posizioni 1, 2 e 3 non hanno piedini.
De posities 1, 2 en 3 hebben geen pins.
4
Yellow
Gelb
Jaune
Giallo
Giallo
Geel
continuous power supply
permanente Stromversorgung
alimentation continue
alimentazione continua
continu voeding
5
Blue
Blau
Bleu
Blau
Bleu
Blu
Blauw
power antenna (aerial) control
Motorantennensteuerung
antenne électrique
comando dell’antenna elettrica
automatische antenne
6
Orange/White
Orangeweiß
gestreift
Rayé orange/
blanc
Arancione/
bianco
Oranje/wit
switched illumination power supply
geschaltete
Beleuchtungsstromversorgung
alimentation de l’éclairage
commuté
alimentazione illuminazione
commutata
geschakelde voeding voor
verlichting
7
Red
Rot
Rouge
Rosso
Rosso
Rood
switched power supply
geschaltete Stromversorgung
alimentation commutée
alimentazione commutata
geschakelde voeding
8
Black
Schwarz
Noir
Nero
Zwart
ground (earth)
Masse
masse
masse
terra
aarding
*
2
*
5
*
1
Note for the antenna (aerial) connecting
If your car antenna (aerial) is an
ISO (International Organization for
Standardization) type, use the supplied
adaptor
ISO (International Organization for
Standardization) type, use the supplied
adaptor
2
to connect it. First connect
the car antenna (aerial) to the supplied
adaptor, then connect it to the antenna
(aerial) jack of the master unit.
adaptor, then connect it to the antenna
(aerial) jack of the master unit.
*
2
RCA pin cord (not supplied)
*
3
Be sure to match the color-coded cord
for audio to the appropriate jacks from
the unit. If you connect an optional
CD/MD changer, you cannot use AUX IN
terminal.
the unit. If you connect an optional
CD/MD changer, you cannot use AUX IN
terminal.
*
4
Supplied with the auxiliary equipment
*
5
Insert with the cord upwards.
*
6
Supplied with XA-C40
*
1
Hinweis zum Anschließen der Antenne
Wenn Ihre Fahrzeugantenne der
ISO-Norm (ISO = International
Organization for Standardization
- Internationale Normungsgemeinschaft)
entspricht, schließen Sie sie mithilfe des
mitgelieferten Adapters
ISO-Norm (ISO = International
Organization for Standardization
- Internationale Normungsgemeinschaft)
entspricht, schließen Sie sie mithilfe des
mitgelieferten Adapters
2
an. Verbinden
Sie zuerst die Fahrzeugantenne mit dem
mitgelieferten Adapter und verbinden Sie
diesen dann mit der Antennenbuchse
des Hauptgeräts.
mitgelieferten Adapter und verbinden Sie
diesen dann mit der Antennenbuchse
des Hauptgeräts.
*
2
Cinchkabel (nicht mitgeliefert)
*
3
Achten Sie darauf, das farbcodierte
Audiokabel mit den richtigen Buchsen
am Gerät zu verbinden. Wenn ein
gesondert erhältlicher CD/MD-Wechsler
angeschlossen ist, kann der Anschluss
AUX IN nicht verwendet werden.
am Gerät zu verbinden. Wenn ein
gesondert erhältlicher CD/MD-Wechsler
angeschlossen ist, kann der Anschluss
AUX IN nicht verwendet werden.
*
4
Mit den Zusatzgeräten mitgeliefert
*
5
Mit dem Kabel nach oben einsetzen.
*
6
Mit dem XA-C40 geliefert
*
1
Remarque sur le raccordement de
l’antenne
Si votre antenne de voiture est de type
ISO (Organisation internationale de
normalisation), utilisez l’adaptateur fourni
Si votre antenne de voiture est de type
ISO (Organisation internationale de
normalisation), utilisez l’adaptateur fourni
pour la r
2
accorder. Raccordez d’abord
l’antenne de voiture à l’adaptateur fourni
et, ensuite, à la prise d’antenne de
l’appareil principal.
et, ensuite, à la prise d’antenne de
l’appareil principal.
*
2
Cordon à broche RCA (non fourni)
*
3
Veillez à faire correspondre le code de
couleur du cordon audio à celui des
fiches correspondantes de l’appareil. Si
vous raccordez un changeur de CD/MD
en option, vous ne pouvez pas utiliser la
borne AUX IN.
vous raccordez un changeur de CD/MD
en option, vous ne pouvez pas utiliser la
borne AUX IN.
*
4
Fourni avec l’appareil auxiliaire
*
5
Insérez avec le câble vers le haut.
*
6
Fourni avec le XA-C40
*
1
Opmerking bij de antenne-aansluiting
Indien uw auto is uitgerust met een
antenne van het type ISO (International
Organization for Standardization),
moet u die aansluiten met behulp
van de bijgeleverde adapter
antenne van het type ISO (International
Organization for Standardization),
moet u die aansluiten met behulp
van de bijgeleverde adapter
2
. Sluit
eerst de auto-antenne aan op de
bijgeleverde adapter en vervolgens de
antennestekker op het hoofdtoestel.
bijgeleverde adapter en vervolgens de
antennestekker op het hoofdtoestel.
*
2
Tulpstekkersnoer (niet bijgeleverd)
*
3
Zorg ervoor dat de kleurcode van het
snoer voor audio overeenkomt met
de bijbehorende aansluitingen op het
apparaat. Als u een optionele CD/MD-
wisselaar aansluit, kunt u de AUX IN
aansluiting niet gebruiken.
de bijbehorende aansluitingen op het
apparaat. Als u een optionele CD/MD-
wisselaar aansluit, kunt u de AUX IN
aansluiting niet gebruiken.
*
4
Geleverd bij de optionele apparatuur
*
5
Plaatsen met het snoer naar boven.
*
6
Geleverd met de XA-C40
Auxiliary equipment such as portable
DVD player (not supplied)
Zusätzliche Geräte wie z. B. der tragbare
DVD-Player (nicht mitgeliefert)
Equipement auxiliaire comme un lecteur
de DVD portable (non fourni)
Apparecchio ausiliario quale un lettore
DVD portatile (non in dotazione)
Optionele apparatuur zoals de draagbare
DVD-speler (niet bijgeleverd)
DVD player (not supplied)
Zusätzliche Geräte wie z. B. der tragbare
DVD-Player (nicht mitgeliefert)
Equipement auxiliaire comme un lecteur
de DVD portable (non fourni)
Apparecchio ausiliario quale un lettore
DVD portatile (non in dotazione)
Optionele apparatuur zoals de draagbare
DVD-speler (niet bijgeleverd)
*
1
Nota per il collegamento dell’antenna
Se l’antenna dell’auto è di tipo
ISO (International Organization for
Standardization), utilizzare l’adattatore
ISO (International Organization for
Standardization), utilizzare l’adattatore
in dotazione per collegar
2
la. Collegare
prima l’antenna della macchina
all’adattatore in dotazione, quindi
collegarla alla presa dell’antenna
dell’apparecchio principale.
all’adattatore in dotazione, quindi
collegarla alla presa dell’antenna
dell’apparecchio principale.
*
2
Cavo a piedini RCA (non in dotazione)
*
3
Assicurarsi che i cavi differenziati in
base al colore per l’audio corrispondano
alle prese appropriate dell’apparecchio.
Se viene collegato un cambia CD/MD
opzionale, non è possibile utilizzare il
terminale AUX IN.
alle prese appropriate dell’apparecchio.
Se viene collegato un cambia CD/MD
opzionale, non è possibile utilizzare il
terminale AUX IN.
*
4
in dotazione con l’apparecchio ausiliario
*
5
Inserire con il cavo rivolto verso l’alto.
*
6
In dotazione con il modello XA-C40
*
6
*
2
*
4
*
6
2
3
Aansluitschema
A
Naar AMP REMOTE IN van een optionele
eindversterker
eindversterker
Deze aansluiting is alleen bedoeld voor versterkers. Door
een ander systeem aan te sluiten kan het apparaat worden
beschadigd.
een ander systeem aan te sluiten kan het apparaat worden
beschadigd.
B
Naar het interface-snoer van een
autotelefoon
autotelefoon
Waarschuwing
Indien u een elektrische antenne hebt zonder relaiskast,
kan het aansluiten van dit apparaat met het bijgeleverde
netsnoer 3 de antenne beschadigen.
kan het aansluiten van dit apparaat met het bijgeleverde
netsnoer 3 de antenne beschadigen.
Opmerkingen over de bedienings- en voedingskabels
•
De antennevoedingskabel (blauw) levert +12 V gelijkstroom
wanneer u de tuner inschakelt of de AF (Alternative
Frequency) of TA (Traffi c Announcement) functie activeert.
wanneer u de tuner inschakelt of de AF (Alternative
Frequency) of TA (Traffi c Announcement) functie activeert.
•
Wanneer uw auto is uitgerust met een FM/MW/LW-antenne
in de achterruit/zijruit, moet u de antennevoedingskabel
(blauw) of de hulpvoedingskabel (rood) aansluiten op de
voedingsingang van de bestaande antenneversterker.
Raadpleeg uw dealer voor meer details.
in de achterruit/zijruit, moet u de antennevoedingskabel
(blauw) of de hulpvoedingskabel (rood) aansluiten op de
voedingsingang van de bestaande antenneversterker.
Raadpleeg uw dealer voor meer details.
•
Met dit apparaat is het niet mogelijk een automatische antenne
zonder relaiskast te gebruiken.
zonder relaiskast te gebruiken.
Instandhouden van het geheugen
Zolang de gele stroomdraad is aangesloten, blijft de
stroomvoorziening van het geheugen intact, ook wanneer het
contact van de auto wordt uitgeschakeld.
Zolang de gele stroomdraad is aangesloten, blijft de
stroomvoorziening van het geheugen intact, ook wanneer het
contact van de auto wordt uitgeschakeld.
Opmerkingen betreffende het aansluiten van de luidsprekers
•
Zorg dat het apparaat is uitgeschakeld, alvorens de
luidsprekers aan te sluiten.
luidsprekers aan te sluiten.
•
Gebruik luidsprekers met een impedantie van 4 tot 8 Ohm
en let op dat die het vermogen van de versterker kunnen
verwerken. Als u dit niet doet, kunnen de luidsprekers ernstig
beschadigd raken.
en let op dat die het vermogen van de versterker kunnen
verwerken. Als u dit niet doet, kunnen de luidsprekers ernstig
beschadigd raken.
•
Verbind in geen geval de aansluitingen van de luidsprekers
met het chassis van de auto en sluit de aansluitingen van de
rechter- en linkerluidspreker niet op elkaar aan.
met het chassis van de auto en sluit de aansluitingen van de
rechter- en linkerluidspreker niet op elkaar aan.
•
Verbind de aarddraad van dit apparaat niet met de negatieve
(–) aansluiting van de luidspreker.
(–) aansluiting van de luidspreker.
•
Probeer nooit de luidsprekers parallel aan te sluiten.
•
Sluit geen actieve luidsprekers (met ingebouwde versterkers)
aan op de luidsprekeraansluiting van dit apparaat. Dit zal
leiden tot beschadiging van de actieve luidsprekers. Sluit dus
altijd uitsluitend luidsprekers zonder ingebouwde versterker
aan.
aan op de luidsprekeraansluiting van dit apparaat. Dit zal
leiden tot beschadiging van de actieve luidsprekers. Sluit dus
altijd uitsluitend luidsprekers zonder ingebouwde versterker
aan.
•
Om defecten te vermijden mag u de bestaande
luidsprekerbedrading in uw auto niet gebruiken wanneer er een
gemeenschappelijke negatieve (–) draad is voor de rechter- en
linkerluidsprekers.
luidsprekerbedrading in uw auto niet gebruiken wanneer er een
gemeenschappelijke negatieve (–) draad is voor de rechter- en
linkerluidsprekers.
•
Verbind de luidsprekerdraden niet met elkaar.
Opmerking over aansluiten
Als de luidspreker en versterker niet correct zijn aangesloten,
wordt "FAILURE" in het display weergegeven. In dit geval moet u
zorgen dat de luidspreker en versterker correct zijn aangesloten.
Als de luidspreker en versterker niet correct zijn aangesloten,
wordt "FAILURE" in het display weergegeven. In dit geval moet u
zorgen dat de luidspreker en versterker correct zijn aangesloten.
Schémas de raccordement
A
Au niveau du AMP REMOTE IN d’un
amplifi cateur de puissance facultatif
amplifi cateur de puissance facultatif
Ce raccordement existe seulement pour les amplifi cateurs.
Le raccordement à tout autre système peut endommager
l’appareil.
Le raccordement à tout autre système peut endommager
l’appareil.
B
Vers le cordon de liaison d’un téléphone de
voiture
voiture
Avertissement
Si vous disposez d’une antenne électrique sans boîtier
de relais, le branchement de cet appareil au moyen du
cordon d’alimentation fourni 3 risque d’endommager
l’antenne.
de relais, le branchement de cet appareil au moyen du
cordon d’alimentation fourni 3 risque d’endommager
l’antenne.
Remarques sur les câbles de commande et d’alimentation
•
Le câble de commande (bleu) fournit du courant continu de
+12 V lorsque vous mettez le tuner sous tension ou lorsque
vous activez la fonction AF (fréquence alternative) ou TA
(informations de circulation).
+12 V lorsque vous mettez le tuner sous tension ou lorsque
vous activez la fonction AF (fréquence alternative) ou TA
(informations de circulation).
•
Lorsque votre voiture est équipée d’une antenne FM/MW
(GO)/LW (PO) intégrée dans la vitre arrière/latérale,
raccordez le câble de commande d’antenne (bleu) ou
l’entrée d’alimentation des accessoires (rouge) au bornier
de l’amplifi cateur d’antenne existant. Pour plus de détails,
consultez votre revendeur.
(GO)/LW (PO) intégrée dans la vitre arrière/latérale,
raccordez le câble de commande d’antenne (bleu) ou
l’entrée d’alimentation des accessoires (rouge) au bornier
de l’amplifi cateur d’antenne existant. Pour plus de détails,
consultez votre revendeur.
•
Une antenne électrique sans boîtier de relais ne peut pas être
utilisée avec cet appareil.
utilisée avec cet appareil.
Raccordement pour la conservation de la mémoire
Lorsque le câble de commande d’antenne jaune est connecté, le
circuit de la mémoire est alimenté en permanence même si la clé
de contact est en position d’arrêt.
Lorsque le câble de commande d’antenne jaune est connecté, le
circuit de la mémoire est alimenté en permanence même si la clé
de contact est en position d’arrêt.
Remarques sur le raccordement des haut-parleurs
•
Avant de raccorder les haut-parleurs, mettre l’appareil hors
tension.
tension.
•
Utiliser des haut-parleurs ayant une impédance de 4 à 8 ohms
et une capacité adéquate sous peine de les endommager.
et une capacité adéquate sous peine de les endommager.
•
Ne pas raccorder les bornes du système de haut-parleurs au
châssis de la voiture et ne pas connecter les bornes du haut-
parleur droit à celles du haut-parleur gauche.
châssis de la voiture et ne pas connecter les bornes du haut-
parleur droit à celles du haut-parleur gauche.
•
Ne pas raccorder le câble de mise à la masse de cet appareil
à la borne négative (–) du haut-parleur.
à la borne négative (–) du haut-parleur.
•
Ne pas tenter de raccorder les haut-parleurs en parallèle.
•
Connecter uniquement des haut-parleurs passifs. La
connexion de haut-parleurs actifs (avec des amplifi cateurs
intégrés) aux bornes des haut-parleurs pourrait endommager
l’appareil.
connexion de haut-parleurs actifs (avec des amplifi cateurs
intégrés) aux bornes des haut-parleurs pourrait endommager
l’appareil.
•
Pour éviter tout problème de fonctionnement, n’utilisez pas les
câbles des haut-parleurs intégrés installés dans votre voiture
si l’appareil dispose d’un câble négatif commun (–) pour les
haut-parleurs droit et gauche.
câbles des haut-parleurs intégrés installés dans votre voiture
si l’appareil dispose d’un câble négatif commun (–) pour les
haut-parleurs droit et gauche.
•
Ne raccordez pas entre eux les cordons des haut-parleurs de
l’appareil.
l’appareil.
Remarque sur le raccordement
Si les enceintes et l’amplifi cateur ne sont pas raccordés
correctement, le message « FAILURE » s’affi che. Dans ce cas,
assurez-vous que les enceintes et l’amplifi cateur sont raccordés
correctement.
Si les enceintes et l’amplifi cateur ne sont pas raccordés
correctement, le message « FAILURE » s’affi che. Dans ce cas,
assurez-vous que les enceintes et l’amplifi cateur sont raccordés
correctement.
Anschlussdiagramm
A
An AMP REMOTE IN des gesondert
erhältlichen Endverstärkers
erhältlichen Endverstärkers
Dieser Anschluss ist ausschließlich für Verstärker gedacht.
Schließen Sie nichts anderes daran an. Andernfalls kann
das Gerät beschädigt werden.
Schließen Sie nichts anderes daran an. Andernfalls kann
das Gerät beschädigt werden.
B
An Schnittstellenkabel eines Autotelefons
Warnung
Wenn Sie eine Motorantenne ohne Relaiskästchen
verwenden, kann durch Anschließen dieses Geräts mit
dem mitgelieferten Stromversorgungskabel 3 die
Antenne beschädigt werden.
verwenden, kann durch Anschließen dieses Geräts mit
dem mitgelieferten Stromversorgungskabel 3 die
Antenne beschädigt werden.
Hinweise zu den Steuer- und Stromversorgungsleitungen
•
Die Motorantennen-Steuerleitung (blau) liefert +12 V
Gleichstrom, wenn Sie den Tuner einschalten oder die
AF- (Alternativfrequenzsuche) oder die TA-Funktion
(Verkehrsdurchsagen) aktivieren.
Gleichstrom, wenn Sie den Tuner einschalten oder die
AF- (Alternativfrequenzsuche) oder die TA-Funktion
(Verkehrsdurchsagen) aktivieren.
•
Wenn das Fahrzeug mit einer in der Heck-/
Seitenfensterscheibe integrierten FM (UKW)/MW/LW-
Antenne ausgestattet ist, schließen Sie die Motorantennen-
Steuerleitung (blau) oder die Zubehörstromversorgungsleitung
(rot) an den Stromversorgungsanschluss des vorhandenen
Antennenverstärkers an. Näheres dazu erfahren Sie bei Ihrem
Händler.
Seitenfensterscheibe integrierten FM (UKW)/MW/LW-
Antenne ausgestattet ist, schließen Sie die Motorantennen-
Steuerleitung (blau) oder die Zubehörstromversorgungsleitung
(rot) an den Stromversorgungsanschluss des vorhandenen
Antennenverstärkers an. Näheres dazu erfahren Sie bei Ihrem
Händler.
•
Es kann nur eine Motorantenne mit Relaiskästchen
angeschlossen werden.
angeschlossen werden.
Stromversorgung des Speichers
Wenn die gelbe Stromversorgungsleitung angeschlossen ist,
wird der Speicher stets (auch bei ausgeschalteter Zündung) mit
Strom versorgt.
Wenn die gelbe Stromversorgungsleitung angeschlossen ist,
wird der Speicher stets (auch bei ausgeschalteter Zündung) mit
Strom versorgt.
Hinweise zum Lautsprecheranschluss
•
Schalten Sie das Gerät aus, bevor Sie die Lautsprecher
anschließen.
anschließen.
•
Verwenden Sie Lautsprecher mit einer Impedanz zwischen 4 und
8 Ohm und ausreichender Belastbarkeit. Ansonsten können die
Lautsprecher beschädigt werden.
8 Ohm und ausreichender Belastbarkeit. Ansonsten können die
Lautsprecher beschädigt werden.
•
Verbinden Sie die Lautsprecheranschlüsse nicht mit dem
Wagenchassis und verbinden Sie auch nicht die Anschlüsse
des rechten mit denen des linken Lautsprechers.
des rechten mit denen des linken Lautsprechers.
•
Verbinden Sie die Masseleitung dieses Geräts nicht mit dem
negativen (–) Lautsprecheranschluss.
negativen (–) Lautsprecheranschluss.
•
Versuchen Sie nicht, Lautsprecher parallel anzuschließen.
•
An die Lautsprecheranschlüsse dieses Geräts dürfen nur
Passivlautsprecher angeschlossen werden. Schließen Sie
keine Aktivlautsprecher (Lautsprecher mit eingebauten
Verstärkern) an, da das Gerät sonst beschuadigt werden
könnte.
Passivlautsprecher angeschlossen werden. Schließen Sie
keine Aktivlautsprecher (Lautsprecher mit eingebauten
Verstärkern) an, da das Gerät sonst beschuadigt werden
könnte.
•
Um Fehlfunktionen zu vermeiden, verwenden Sie nicht die
im Fahrzeug installierten, integrierten Lautsprecherleitungen,
wenn am Ende eine gemeinsame negative (–) Leitung für den
rechten und den linken Lautsprecher verwendet wird.
im Fahrzeug installierten, integrierten Lautsprecherleitungen,
wenn am Ende eine gemeinsame negative (–) Leitung für den
rechten und den linken Lautsprecher verwendet wird.
•
Verbinden Sie nicht die Lautsprecherkabel des Geräts
miteinander.
miteinander.
Hinweis zum Anschließen
Wenn Lautsprecher und Verstärker nicht richtig angeschlossen
sind, erscheint „FAILURE“ im Display. Vergewissern Sie sich
in diesem Fall, dass Lautsprecher und Verstärker richtig
angeschlossen sind.
Wenn Lautsprecher und Verstärker nicht richtig angeschlossen
sind, erscheint „FAILURE“ im Display. Vergewissern Sie sich
in diesem Fall, dass Lautsprecher und Verstärker richtig
angeschlossen sind.
Schema di collegamento
A
A AMP REMOTE IN di un amplifi catore di
potenza opzionale
potenza opzionale
Questo collegamento è riservato esclusivamente agli
amplifi catori. Non collegare un tipo di sistema diverso onde
evitare di causare danni all’apparecchio.
amplifi catori. Non collegare un tipo di sistema diverso onde
evitare di causare danni all’apparecchio.
B
Al cavo di interfaccia di un telefono per auto
Avvertenza
Quando si collega l’apparecchio con il cavo di
alimentazione in dotazione 3, si potrebbe danneggiare
l’antenna elettrica se questa non dispone di scatola a relè.
alimentazione in dotazione 3, si potrebbe danneggiare
l’antenna elettrica se questa non dispone di scatola a relè.
Note sui cavi di controllo e di alimentazione
•
Il cavo (blu) di controllo dell’antenna elettrica fornisce
alimentazione pari a +12 V CC quando si attiva il
sintonizzatore oppure la funzione TA (notiziario sul traffi co) o
AF (frequenza alternativa).
alimentazione pari a +12 V CC quando si attiva il
sintonizzatore oppure la funzione TA (notiziario sul traffi co) o
AF (frequenza alternativa).
•
Se l’automobile è dotata di antenna FM/MW/LW incorporata
nel vetro posteriore/laterale, collegare il cavo (blu) di
controllo dell’antenna elettrica o il cavo (rosso) di ingresso
dell’alimentazione accessoria al terminale di alimentazione
del preamplifi catore dell’antenna esistente. Per ulteriori
informazioni, consultare il proprio fornitore.
nel vetro posteriore/laterale, collegare il cavo (blu) di
controllo dell’antenna elettrica o il cavo (rosso) di ingresso
dell’alimentazione accessoria al terminale di alimentazione
del preamplifi catore dell’antenna esistente. Per ulteriori
informazioni, consultare il proprio fornitore.
•
Non è possibile usare un’antenna elettrica senza scatola a relè
con questo apparecchio.
con questo apparecchio.
Collegamento per la conservazione della memoria
Quando il cavo di ingresso alimentazione giallo è collegato,
viene sempre fornita alimentazione al circuito di memoria anche
quando l’interruttore di accensione è spento.
Quando il cavo di ingresso alimentazione giallo è collegato,
viene sempre fornita alimentazione al circuito di memoria anche
quando l’interruttore di accensione è spento.
Note sul collegamento dei diffusori
•
Prima di collegare i diffusori spegnere l’apparecchio.
•
Usare diffusori di impedenza compresa tra 4 e 8 ohm e con
capacità di potenza adeguata, altrimenti i diffusori potrebbero
venire danneggiati.
capacità di potenza adeguata, altrimenti i diffusori potrebbero
venire danneggiati.
•
Non collegare i terminali del sistema diffusori al telaio dell’auto
e non collegare i terminali del diffusore destro a quelli del
diffusore sinistro.
e non collegare i terminali del diffusore destro a quelli del
diffusore sinistro.
•
Non collegare il cavo di terra di questo apparecchio al
terminale negativo (–) del diffusore.
terminale negativo (–) del diffusore.
•
Non collegare i diffusori in parallelo.
•
Assicurarsi di collegare soltanto diffusori passivi, poiché
il collegamento di diffusori attivi, dotati di amplifi catori
incorporati, ai terminali dei diffusori potrebbe danneggiare
l’apparecchio.
il collegamento di diffusori attivi, dotati di amplifi catori
incorporati, ai terminali dei diffusori potrebbe danneggiare
l’apparecchio.
•
Per evitare problemi di funzionamento, non utilizzare i cavi dei
diffusori incorporati installati nell’automobile se l’apparecchio
condivide un cavo comune negativo (–) per i diffusori destro e
sinistro.
diffusori incorporati installati nell’automobile se l’apparecchio
condivide un cavo comune negativo (–) per i diffusori destro e
sinistro.
•
Non collegare fra loro i cavi dei diffusori dell’apparecchio.
Nota sui collegamenti
Se l’amplifi catore e il diffusore non sono collegati correttamente,
“FAILURE” viene visualizzato nel display. In tal caso, accertarsi
che l’amplifi catore e il diffusore siano collegati correttamente.
Se l’amplifi catore e il diffusore non sono collegati correttamente,
“FAILURE” viene visualizzato nel display. In tal caso, accertarsi
che l’amplifi catore e il diffusore siano collegati correttamente.
Connection diagram
A
To AMP REMOTE IN of an optional power
amplifi er
amplifi er
This connection is only for amplifi ers. Connecting any other
system may damage the unit.
system may damage the unit.
B
To the interface cable of a car telephone
Warning
If you have a power antenna (aerial) without a relay box,
connecting this unit with the supplied power connecting
lead 3 may damage the antenna (aerial).
connecting this unit with the supplied power connecting
lead 3 may damage the antenna (aerial).
Notes on the control power and suppy leads
•
The power antenna (aerial) control lead (blue) supplies +12 V
DC when you turn on the tuner, or when you activate the AF
(Alternative Frequency) or TA (Traffi c Announcement) function.
DC when you turn on the tuner, or when you activate the AF
(Alternative Frequency) or TA (Traffi c Announcement) function.
•
When your car has built-in FM/MW/LW antenna (aerial) in the
rear/side glass, connect the power antenna (aerial) control
lead (blue) or the accessory power supply lead (red) to the
power terminal of the existing antenna (aerial) booster. For
details, consult your dealer.
rear/side glass, connect the power antenna (aerial) control
lead (blue) or the accessory power supply lead (red) to the
power terminal of the existing antenna (aerial) booster. For
details, consult your dealer.
•
A power antenna (aerial) without a relay box cannot be used
with this unit.
with this unit.
Memory hold connection
When the yellow power supply lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
When the yellow power supply lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
•
Before connecting the speakers, turn the unit off.
•
Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
adequate power handling capacities to avoid its damage.
•
Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
connect the terminals of the right speakers with those of the
left speaker.
•
Do not connect the ground (earth) lead of this unit to the
negative (–) terminal of the speaker.
negative (–) terminal of the speaker.
•
Do not attempt to connect the speakers in parallel.
•
Connect only passive speakers. Connecting active speakers
(with built-in amplifi ers) to the speaker terminals may damage
the unit.
(with built-in amplifi ers) to the speaker terminals may damage
the unit.
•
To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
•
Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
8
CDX-GT610U/GT616U/GT617UE
• CDX-GT617UE
AUDIO OUT
FRONT
AUDIO OUT
REAR
SUB OUT (MONO)
BUS AUDIO IN
BUS CONTROL IN
A
B
BUS AUDIO IN
BUS CONTROL IN
Source selector
*
*
XA-C40
*
not supplied
Connection example
Notes (
2
-A)
•
Be sure to connect the ground (earth) lead before connecting
the amplifi er.
the amplifi er.
•
The alarm will only sound if the built-in amplifi er is used.
Tip (
2
-B- )
For connecting two or more CD/MD changers, the source
selector XA-C40 (not supplied) is necessary.
selector XA-C40 (not supplied) is necessary.
Click on the first or last page to see other CDX-GT610U / CDX-GT616U / CDX-GT617UE service manuals if exist.