Sony CDX-GT572 Service Manual ▷ View online
CDX-GT572
10
3-5. CHASSIS (T) SUB ASSY
3-6. ROLLER ARM ASSY
chassis (T) sub assy
claw
two precision screws
(+P
1.7
× 2.2)
two precision screws
(+P
1.7
× 2.2)
washer
gear (RA1)
roller arm assy
spring (RAL)
spring (RAR)
CDX-GT572
11
3-7. CHASSIS (OP) ASSY
3-8. CHUCKING ARM SUB ASSY
coil spring (damper) (natural)
coil spring (damper) (blue)
chassis (OP) assy
tension spring (KF)
gear (LE1)
lever (D)
slider (R)
chucking arm sub assy
spring
Note: Have this portion receive the chassis.
Note: Have this portion receive the chassis.
Note: Be careful not to touch the turn table.
CDX-GT572
12
3-9. SLED MOTOR ASSY
sled motor assy
sled motor assy
spring
spring
stand
stand
turn table
three serration screws
(M
2
× 3)
three
serration
screws
(M
2
× 3)
Note: Place the stand with care not to touch the turn table.
Note:
Never remove these parts since they were adjusted.
Never remove these parts since they were adjusted.
Note for Assembly
Note: Take care to prevent the chassis from being bent
when tightening the three machine screws.
CDX-GT572
13
3-10. OPTICAL PICK-UP SECTION
3-11. OPTICAL PICK-UP
optical pick-up section
Note: Be careful not to touch the lens and hologram
terminal when removing the optical pick-up section.
There is space at the end of the
leaf spring (sub guide) to avoid
contact with the slide.
leaf spring (sub guide) to avoid
contact with the slide.
pan tapping screw
(M
1.4
× 2.5)
leaf spring (sub guide)
leaf spring (OP)
optical pick-up
lead screw assy
Notes for Assembly
Prevent the end of the
leaf spring (sub guide) from being
in contact with the OP slide base.
leaf spring (sub guide) from being
in contact with the OP slide base.
Prevent the end of the
leaf spring (sub guide) from being
in contact with the OP slide base.
leaf spring (sub guide) from being
in contact with the OP slide base.
Click on the first or last page to see other CDX-GT572 service manuals if exist.