Sony CDX-GT572 Service Manual ▷ View online
CDX-GT572
13
3-10. OPTICAL PICK-UP SECTION
3-11. OPTICAL PICK-UP
optical pick-up section
Note: Be careful not to touch the lens and hologram
terminal when removing the optical pick-up section.
There is space at the end of the
leaf spring (sub guide) to avoid
contact with the slide.
leaf spring (sub guide) to avoid
contact with the slide.
pan tapping screw
(M
1.4
× 2.5)
leaf spring (sub guide)
leaf spring (OP)
optical pick-up
lead screw assy
Notes for Assembly
Prevent the end of the
leaf spring (sub guide) from being
in contact with the OP slide base.
leaf spring (sub guide) from being
in contact with the OP slide base.
Prevent the end of the
leaf spring (sub guide) from being
in contact with the OP slide base.
leaf spring (sub guide) from being
in contact with the OP slide base.
CDX-GT572
14
4. Contents of each display mode
4-1. Reset count display mode
4-2. Reset count by watchdog timer display mode
SECTION 4
DIAGNOSIS FUNCTION
Description of the Diagnostics function:
1. Setting the Diag display mode
With the power off, press the [4/SHUF] button, [5] button, and
[4/SHUF] button on the set body or the remote control (for
more than 2 seconds) in turn.
[4/SHUF] button on the set body or the remote control (for
more than 2 seconds) in turn.
2. Canceling the Diag display mode
During the Diag function mode, press the [OFF] button.
3. Initial display in the Diag display mode
Just when the Diag mode is entered, “reset count” is displayed.
The display mode is switched by each rotation of [SEEK +/
M>
] or [SEEK –/
.m
] buttons.
4-3. Number of connected units display mode
The display mode is switched by each rotation of [ALBM+] or
[ALBM–] buttons during the number of connected units display
mode.
[ALBM–] buttons during the number of connected units display
mode.
4-4. Operating hours display mode
4-5. CD error information display mode
4-5-1. Error description
4-5-1. Error description
Reset count
(in hexadecimal format)
(in hexadecimal format)
Diag code
01: Reset count
01: Reset count
Reset count
(in hexadecimal format)
(in hexadecimal format)
Diag code
02: Number of resets by watchdog timer
02: Number of resets by watchdog timer
Shown the number of connected
units for CD-C, MD-C and XM
respectivery from the rightmost
(in hexadecimal format).
units for CD-C, MD-C and XM
respectivery from the rightmost
(in hexadecimal format).
Recency of information
1 - 3: 1 represents the latest.
1 - 3: 1 represents the latest.
Diag code
03: Number of connected unit
03: Number of connected unit
No. of connected units history 1 (latest) display
No. of connected units history 3 display
No. of connected units history 2 display
Operating hours
(in hexadecimal format)
(in hexadecimal format)
Diag code
04: Operating hours
04: Operating hours
Error information
Indication
Description
1X
SERVO ERROR
3X
LOADING ERROR
4X
TRACK JUMP
5X
TEXT ERROR
FX
MECHA ERROR
Error description
(in hexadecimal format)
(in hexadecimal format)
Recency of information
1 - 3: 1 represents the latest.
1 - 3: 1 represents the latest.
Diag code
05: CD error information
05: CD error information
Reset count display
OFFSET/FAILURE error display
CD error information display
Operating hours display
Number of connected units display
Reset count by watchdog timer display
CDX-GT572
15
4-5-2. Disc type and operating hours
The display mode is switched by each rotation of [ALBM+] or
[ALBM–] buttons during the CD error information display mode.
[ALBM–] buttons during the CD error information display mode.
4-6. OFFSET/FAILURE error display mode
The display mode is switched by each rotation of [ALBM+] or
[ALBM–] buttons during the OFFSET/FAILURE error display
mode.
[ALBM–] buttons during the OFFSET/FAILURE error display
mode.
Disc type
Indication
Disc type
0
MP3
1
WMA
2
AAC
3
ATRAC
8
CD-DA
F
UNKNOWN
Operating hours
Recency of information
1 - 3: 1 represents the latest.
1 - 3: 1 represents the latest.
Diag code
05: CD error information
05: CD error information
Disc type
CD error info history 1 (latest)
Error description plus error details display
Error description plus error details display
CD error info history 3
Disc type plus operating hours display
Disc type plus operating hours display
CD error info history 3
Error description plus error details display
Error description plus error details display
CD error info history 2
Disc type plus operating hours display
Disc type plus operating hours display
CD error info history 2
Error description plus error details display
Error description plus error details display
CD error info history 1 (latest)
Disc type plus operating hours display
Disc type plus operating hours display
Operating hours
Recency of information
1 - 3: 1 represents the latest.
1 - 3: 1 represents the latest.
Diag code
06: OFFSET/FAILURE
06: OFFSET/FAILURE
Error description
(0: OFFSET, 1: FAILURE)
(0: OFFSET, 1: FAILURE)
OFFSET/FAILURE error history 1 (latest) display
OFFSET/FAILURE error history 3 display
OFFSET/FAILURE error history 2 display
CDX-GT572
16
For Schematic Diagram.
Note:
• All capacitors are in
• All capacitors are in
μF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in
Ω and
1
/
4
W or less unless otherwise
specifi ed.
•
f : internal component.
•
C : panel designation.
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
(In addition to this, the necessary note is printed in each block.)
•
A : B+ Line.
•
B : B– Line.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : FM
(
(
)
:
MW
<
> : CD PLAY
• Voltages are taken with a VOM (Input impedance 10 M
Ω).
Voltage variations may be noted due to normal production
tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production
Voltage variations may be noted due to normal production
tolerances.
• Circled numbers refer to waveforms.
• Signal path.
J
: CD PLAY
F :
FM
f :
MW
L :
AUX
g : AUDIO
For Printed Wiring Boards.
Note:
•
•
X : Parts extracted from the component side.
•
Y : parts extracted from the conductor side.
•
a
:
Through
hole.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side:
(SIDE B)
Parts face side:
(SIDE A)
Pattern face side:
(SIDE B)
Parts face side:
(SIDE A)
Parts on the pattern face side seen from
the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
Note: The components identifi ed by mark
0 or dotted
line with mark
0 are critical for safety.
Replace only with part number specifi ed.
• Waveforms
– MAIN Board –
– MAIN Board –
SECTION 5
DIAGRAMS
1.6 Vp-p
32.768 kHz
IC501
VM (XOUT)
2.5 Vp-p
18.432 MHz
IC501
JE (OSCOUT)
1 V/DIV, 50 nsec/DIV
1 V/DIV, 50 nsec/DIV
Click on the first or last page to see other CDX-GT572 service manuals if exist.