Sony CDX-GT317EE / CDX-GT360 Service Manual ▷ View online
5
CDX-GT317EE/GT360
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
• LOCATION OF CONTROLS
• CDX-GT317EE
• CDX-GT317EE
• CDX-GT360
6
Location of controls and basic operations
Main unit
Card remote commander
RM-X151
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
OFF button
To power off; stop the source.
B
EQ3 (equalizer) button 11
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C
Volume control dial/select button 11
To adjust volume (rotate); select setup items
(press and rotate).
(press and rotate).
D
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/AUX).
E
Disc slot
Insert the disc (label side up), playback
starts.
starts.
F
Display window
G
AUX input jack 12
To connect a portable audio device.
H Z
(eject) button
To eject the disc.
I
PTY (Program Type) button 10
To select PTY in RDS.
J
(front panel release) button 5
OFF
DSPL
MODE
PUSH SELECT
SEEK
SEEK
PAUSE
ALBM
DIM
REP
SHUF
EQ3
AUX
SOURCE
1
2
3
4
5
6
AF/ TA
PTY
1 2
qj
qh
4
5
8
6
7
3
CDX-GT317EE
qa
qd
q;
9
qs
qfqg
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
4
wa
qd
1
wd
qk
qf
w;
ql
wf
ws
7
K
SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L
Receptor for the card remote
commander
commander
M
MODE button 8, 12
To select the radio band (FM/MW/LW);
select the unit*
select the unit*
2
.
N
DSPL (display)/DIM (dimmer) button
8, 9
8, 9
To change display items (press); change the
display brightness (press and hold).
display brightness (press and hold).
O
RESET button
(located behind the front
panel)
4
P
Number buttons
CD/MD*
1
:
(1)/(2):
ALBM –/+
*
3
*
4
To skip albums (press); skip albums
continuously (press and hold).
continuously (press and hold).
(3):
REP 8
(4):
SHUF 8
(6):
PAUSE
*
5
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
Q
AF (Alternative Frequencies)/TA
(Traffic Announcement) button 9
(Traffic Announcement) button 9
To set AF and TA in RDS.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
qk <
(
.
)/
,
(
>
) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
–/+ on the unit.
ql
VOL (volume) +/– button
To adjust volume.
w;
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wa
SEL (select) button
The same as the select button on the unit.
ws M
(+)/
m
(–) buttons
To control CD, the same as (1)/(2)
(ALBM –/+) on the unit.
(ALBM –/+) on the unit.
wd
SCRL (scroll) button 8
To scroll the display item.
wf
Number buttons
To receive stored stations (press); store
stations (press and hold).
stations (press and hold).
*1
When an MD changer is connected.
*2
When a CD/MD changer is connected.
*3
When an MP3/WMA is played.
*4
If the changer is connected, the operation is
different, see page 13.
different, see page 13.
*5
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 15.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 15.
6
Location of controls and basic operations
Main unit
Card remote commander
RM-X151
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
OFF button
To power off; stop the source.
B
EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C
Volume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
(press and rotate).
D
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/AUX).
E
Disc slot
Insert the disc (label side up), playback
starts.
starts.
F
Display window
G
AUX input jack 10
To connect a portable audio device.
H Z
(eject) button
To eject the disc.
I
BTM button 8
To start the BTM function (press and hold).
J
(front panel release) button 5
OFF
BTM
DSPL
MODE
SCRL
PUSH SELECT
SEEK
SEEK
PAUSE
ALBM
DIM
REP
SHUF
EQ3
AUX
SOURCE
1
2
3
4
5
6
1 2
qj
qh
4
5
8
6
7
3
CDX-GT360
qa
qd
q;
9
qs
qfqg
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
4
wa
qd
1
qj
qk
qf
w;
ql
wd
ws
7
K
SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L
Receptor for the card remote
commander
commander
M
MODE button 8, 11
To select the radio band (FM/MW/SW);
select the unit*
select the unit*
2
.
N
DSPL (display)/DIM (dimmer) button
8
8
To change display items (press); change the
display brightness (press and hold).
display brightness (press and hold).
O
RESET button
(located behind the front
panel)
4
P
Number buttons
CD/MD*
1
:
(1)/(2)
: ALBM –/+
*
3
*
4
To skip albums (press); skip albums
continuously (press and hold).
continuously (press and hold).
(3):
REP 8
(4):
SHUF 8
(6):
PAUSE
*
5
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
Q
SCRL (scroll) button 8
To scroll the display item.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
qk <
(
.
)/
,
(
>
) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
–/+ on the unit.
ql
VOL (volume) +/– button
To adjust volume.
w;
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wa
SEL (select) button
The same as the select button on the unit.
ws M
(+)/
m
(–) buttons
To control CD, the same as (1)/(2)
(ALBM –/+) on the unit.
(ALBM –/+) on the unit.
wd
Number buttons
To receive stored stations (press); store
stations (press and hold).
stations (press and hold).
*1
When an MD changer is connected.
*2
When a CD/MD changer is connected.
*3
When an MP3/WMA is played.
*4
If the changer is connected, the operation is
different, see page 11.
different, see page 11.
*5
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.
6
CDX-GT317EE/GT360
• CONNECTIONS
• CDX-GT317EE
• CDX-GT317EE
AUDIO OUT REAR
*
BUS AUDIO IN
BUS CONTROL IN
A
B
BUS AUDIO IN
BUS CONTROL IN
Source selector
*
*
XA-C40
*
not supplied
*
AUDIO OUT SUB/REAR
Connection example
Notes (
2
-A)
•
Be sure to connect the ground (earth) lead before connecting
the amplifi er.
the amplifi er.
•
The alarm will only sound if the built-in amplifi er is used.
Tip (
2
-B- )
For connecting two or more CD/MD changers, the source
selector XA-C40 (not supplied) is necessary.
selector XA-C40 (not supplied) is necessary.
7
CDX-GT317EE/GT360
L
R
AUDIO OUT
REAR/SUB
BUS
IN
BUS
CONTROL IN
1
3
5
7
2
4
6
8
5
7
4
8
AUDIO OUT REAR
*
3
BUS AUDIO IN
Negative polarity positions 2, 4, 6, and 8 have striped leads.
1
Purple
+
Speaker, Rear, Right
5
White
+
Speaker, Front, Left
2
–
Speaker, Rear, Right
6
–
Speaker, Front, Left
3
Grey
+
Speaker, Front, Right
7
Green
+
Speaker, Rear, Left
4
–
Speaker, Front, Right
8
–
Speaker, Rear, Left
AMP REM
Max. supply current 0.3 A
Fuse (10 A)
Blue/white striped
Light blue
from the car’s power connector
See “Power connection diagram” on the reverse
side for details.
side for details.
Positions 1, 2, 3, and 6 do not have pins.
from the car’s speaker
connector
connector
ATT
*
2
Source selector
(not supplied)
XA-C40
4
Yellow
continuous power supply
7
Red
switched power supply
5
Blue
power antenna (aerial) control
8
Black
ground (earth)
Supplied with the CD/MD changer
from car antenna (aerial)
*
1
*
1
Note for the aerial connecting
If your car aerial is an ISO (International
Organization for Standardization) type, use the
supplied adaptor
Organization for Standardization) type, use the
supplied adaptor
2
to connect it. First connect
the car antenna (aerial) to the supplied adaptor,
then connect it to the antenna (aerial) jack of the
master unit.
then connect it to the antenna (aerial) jack of the
master unit.
*
2
RCA pin cord (not supplied)
*
3
AUDIO OUT can be switched to SUB or REAR. For
details, see the supplied Operating Instructions.
*
1
*
2
*
3
Supplied with XA-C40
XA-C40
2
3
Connection diagram
A
To AMP REMOTE IN of an optional power
amplifi er
amplifi er
This connection is only for amplifi ers. Connecting any other
system may damage the unit.
system may damage the unit.
B
To the interface cable of a car telephone
Warning
If you have a power antenna (aerial) without a relay box,
connecting this unit with the supplied power connecting
lead 3 may damage the antenna (aerial).
connecting this unit with the supplied power connecting
lead 3 may damage the antenna (aerial).
Notes on the control and power suppy leads
•
•
The power antenna (aerial) control lead (blue) supplies +12 V
DC when you turn on the tuner, or when you activate the AF
(Alternative Frequency) or TA (Traffi c Announcement) function.
DC when you turn on the tuner, or when you activate the AF
(Alternative Frequency) or TA (Traffi c Announcement) function.
•
When your car has built-in FM/MW/LW antenna (aerial) in the
rear/side glass, connect the power antenna (aerial) control
lead (blue) or the accessory power supply lead (red) to the
power terminal of the existing antenna (aerial) booster. For
details, consult your dealer.
rear/side glass, connect the power antenna (aerial) control
lead (blue) or the accessory power supply lead (red) to the
power terminal of the existing antenna (aerial) booster. For
details, consult your dealer.
•
A power antenna (aerial) without a relay box cannot be used
with this unit.
with this unit.
Memory hold connection
When the yellow power supply lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
When the yellow power supply lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
•
•
Before connecting the speakers, turn the unit off.
•
Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
adequate power handling capacities to avoid its damage.
•
Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
connect the terminals of the right speakers with those of the
left speaker.
•
Do not connect the ground (earth) lead of this unit to the
negative (–) terminal of the speaker.
negative (–) terminal of the speaker.
•
Do not attempt to connect the speakers in parallel.
•
Connect only passive speakers. Connecting active speakers
(with built-in amplifi ers) to the speaker terminals may damage
the unit.
(with built-in amplifi ers) to the speaker terminals may damage
the unit.
•
To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
•
Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
8
CDX-GT317EE/GT360
• CONNECTIONS
• CDX-GT360
• CDX-GT360
AUDIO OUT REAR
*
BUS AUDIO IN
BUS CONTROL IN
A
B
BUS AUDIO IN
BUS CONTROL IN
Source selector
*
XA-C40
*
not supplied
*
AUDIO OUT SUB/REAR
Connection example
Notes (
2
-A)
•
Be sure to connect the ground (earth) lead before connecting
the amplifi er.
the amplifi er.
•
The alarm will only sound if the built-in amplifi er is used.
Tip (
2
-B- )
For connecting two or more CD/MD changers, the source
selector XA-C40 (not supplied) is necessary.
selector XA-C40 (not supplied) is necessary.
Click on the first or last page to see other CDX-GT317EE / CDX-GT360 service manuals if exist.