DOWNLOAD Sony CDX-GT110 / CDX-GT11W / CDX-GT160 / CDX-GT160S Service Manual ↓ Size: 4.73 MB | Pages: 40 in PDF or view online for FREE

Model
CDX-GT110 CDX-GT11W CDX-GT160 CDX-GT160S
Pages
40
Size
4.73 MB
Type
PDF
Document
Service Manual
Brand
Device
Car Audio
File
cdx-gt110-cdx-gt11w-cdx-gt160-cdx-gt160s.pdf
Date

Sony CDX-GT110 / CDX-GT11W / CDX-GT160 / CDX-GT160S Service Manual ▷ View online

10
CDX-GT11W/GT110/GT160/GT160S
2
Fuse (10 A)
Fusible (10 A)
from car antenna (aerial) 
desde la antena del automóvil
Left
Izquierdo
Right
Derecho
Left
Izquierdo
Right
Derecho
ANT REM
Red
Rojo
Yellow
Amarillo
Black
Negro
Blue
Azul
Max. supply current 0.1 A
Corriente máx. de alimentación de 0,1 A
White
Blanco
Green
Verde
Purple
Morado
White/black striped
Con rayas blancas y negras
Gray/black striped
Con rayas grises y negras
Green/black striped
Con rayas verdes y negras
Gray
Gris
Purple/black striped
Con rayas moradas y negras
Connection diagram
1
  To a metal surface of the car
First connect the black ground (earth) lead, then connect the 
yellow and red power supply leads.
2
  To the power antenna (aerial) control lead or 
power supply lead of antenna (aerial) booster
Notes
  It is not necessary to connect this lead if there is no power 
antenna (aerial) or antenna (aerial) booster, or with a 
manually-operated telescopic antenna (aerial).
  When your car has a built-in FM/MW/SW antenna (aerial) 
in the rear/side glass, see “Notes on the control and power 
supply leads.”
3
  To the + 12 V power terminal which is 
energized in the accessory position of the 
ignition switch
Notes
  If there is no accessory position, connect to the + 12 V 
power (battery) terminal which is energized at all times.
  Be sure to connect the black ground (earth) lead to a 
metal surface of the car fi rst.
  When your car has a built-in FM/MW/SW antenna (aerial) 
in the rear/side glass, see “Notes on the control and power 
supply leads.”
4
  To the + 12 V power terminal which is 
energized at all times
Be sure to connect the black ground (earth) lead to a metal 
surface of the car fi rst.
Notes on the control and power supply leads
  The power antenna (aerial) control lead (blue) supplies + 12 V 
DC when you turn on the tuner.
  When your car has built-in FM/MW/SW antenna (aerial) in the 
rear/side glass, connect the power antenna (aerial) control 
lead (blue) or the accessory power supply lead (red) to the 
power terminal of the existing antenna (aerial) booster. For 
details, consult your dealer.
  A power antenna (aerial) without a relay box cannot be used 
with this unit.
Memory hold connection
When the yellow power supply lead is connected, power will 
always be supplied to the memory circuit even when the ignition 
switch is turned off.
Notes on speaker connection
  Before connecting the speakers, turn the unit off.
  Use speakers with an impedance of 4 to 8 ohms, and with 
adequate power handling capacities to avoid its damage.
  Do not connect the speaker terminals to the car chassis, or 
connect the terminals of the right speakers with those of the 
left speaker.
  Do not connect the ground (earth) lead of this unit to the 
negative (–) terminal of the speaker.
  Do not attempt to connect the speakers in parallel.
  Connect only passive speakers. Connecting active speakers 
(with built-in amplifi ers) to the speaker terminals may damage 
the unit.
  To avoid a malfunction, do not use the built-in speaker leads 
installed in your car if the unit shares a common negative (–) 
lead for the right and left speakers.
  Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker is not connected correctly, “FAILURE” appears in 
the display. In this case, make sure the speaker is connected 
correctly.
Diagrama de conexión
1
 A una superfi cie metálica del automóvil
Conecte primero el cable de conexión a masa negro, y 
después los cables amarillo y rojo de fuente de alimentación.
2
 Al cable de control de la antena motorizada 
o al cable de fuente de alimentación del 
amplifi cador de señal de la antena
Notas
  Si no se dispone de antena motorizada ni de amplifi cador 
de señal de la antena, o se utiliza una antena telescópica 
accionada manualmente, no será necesario conectar este 
cable.
  Si el automóvil incorpora una antena de FM/MW/SW en el 
cristal trasero o lateral, consulte “Notas sobre los cables 
de control y de fuente de alimentación”.
3
 Al terminal de alimentación de + 12 V que 
recibe energía en la posición de accesorio 
del interruptor de la llave de encendido
Notas
  Si no hay posición de accesorio, conéctelo al terminal de 
alimentación (batería) de + 12 V que recibe energía sin 
interrupción.
  Asegúrese de conectar primero el cable de conexión a 
masa negro a una superfi cie metálica del automóvil.
  Si el automóvil incorpora una antena de FM/MW/SW en el 
cristal trasero o lateral, consulte “Notas sobre los cables 
de control y de fuente de alimentación”.
4
 Al terminal de alimentación de + 12 V que 
recibe energía sin interrupción
Asegúrese de conectar primero el cable de conexión a masa 
negro a una superfi cie metálica del automóvil.
Notas sobre los cables de control y de fuente de 
alimentación
  El cable de control de la antena motorizada (azul) suministrará 
cc de + 12 V cuando conecte la alimentación del sintonizador.
  Si el automóvil dispone de una antena de FM/MW/SW 
incorporada en el cristal trasero o lateral, conecte el cable 
de control de antena motorizada (azul) o el cable de fuente 
de alimentación auxiliar (rojo) al terminal de alimentación del 
amplifi cador de señal de la antena existente. Para obtener más 
información, consulte a su distribuidor.
  Con esta unidad no es posible utilizar una antena motorizada 
sin caja de relé.
Conexión para protección de la memoria
Si conecta el cable de fuente de alimentación amarillo, el circuito 
de la memoria recibirá siempre alimentación, aunque apague el 
interruptor de encendido.
Notas sobre la conexión de los altavoces
  Antes de conectar los altavoces, desconecte la alimentación 
de la unidad.
  Utilice altavoces con una impedancia de 4 a 8 
 con la 
capacidad de potencia adecuada para evitar que se dañen.
  No conecte los terminales de altavoz al chasis del automóvil, 
ni conecte los terminales del altavoz derecho con los del 
izquierdo.
  No conecte el cable de conexión a masa de esta unidad al 
terminal negativo (–) del altavoz.
  No intente conectar los altavoces en paralelo.
  Conecte solamente altavoces pasivos. Si conecta altavoces 
activos (con amplifi cadores incorporados) a los terminales de 
altavoz, puede dañar la unidad.
  Para evitar fallos de funcionamiento, no utilice los cables de 
altavoz incorporados instalados en el automóvil si su unidad 
comparte un cable negativo común (–) para los altavoces 
derecho e izquierdo.
  No conecte los cables de altavoz de la unidad entre sí.
Nota sobre la conexión
Si el altavoz no está conectado correctamente, aparecerá 
“FAILURE” en la pantalla. Si es así, compruebe la conexión del 
altavoz.
1
2
3
4



11
CDX-GT11W/GT110/GT160/GT160S
SECTION 2
DISASSEMBLY
Note: This set can be disassemble according to the following sequence.
2-1.
SUB PANEL (LCD) ASSY
(Page 12)
2-2.
CD MECHANISM BLOCK
(Page 12)
SET
2-3.
MAIN BOARD
(Page 13)
2-5.
CHASSIS (T) SUB ASSY
(Page 14)
2-6.
ROLLER ARM ASSY
(Page 14)
2-7.
CHASSIS (OP) ASSY
(Page 15)
2-4.
SERVO BOARD
(Page 13)
1. CHUCKING ARM SUB ASSY
(SUPPLEMENT-1 Page 1)
2. SLED MOTOR ASSY
(SUPPLEMENT-1 Page 2)
3. OPTICAL PICK-UP SECTION
(SUPPLEMENT-1 Page 3)
4. OPTICAL PICK-UP
(SUPPLEMENT-1 Page 3)
Ver. 1.2
12
CDX-GT11W/GT110/GT160/GT160S
2-2. CD MECHANISM BLOCK
Note: Follow the disassembly procedure in the numerical order given.
2-1. SUB PANEL (LCD) ASSY
2
two claws
3
two claws
4
 sub panel (LCD) assy 
1
 
two screws
     (+PTT 2.6
 
×
 6)
4
CNP301
3
1
screw
(+PTT 2.6
 
×
 6)
2
screw
(+PTT 2.6
 
×
 6)
5
two screws
(+PTT 2.6
 
×
 4)
6
bracket (CD)
7
CD mechanism block
13
CDX-GT11W/GT110/GT160/GT160S
2-4. SERVO BOARD
2-3. MAIN BOARD
8
MAIN board 
insulating sheet
3
2
two screws
(+PTT 2.6
 
×
 8)
6
screw
(+PTT 2.6
 
×
 8)
7
heat sink
4
two screws
(+P 2.6
 
×
 8)
5
two screws
(+PTT 2.6
 
×
 12)
1
three screws
(+BTT)
5
SERVO board 
SERVO board 
claw
claw
3
toothed lock screw
(M 1.7
 
×
 2.5)
2
toothed lock screw
(M 1.7
 
×
 2.5)
1
Remove the eleven solders.
GRY
YEL
BLE
ORG
RED
BLK
RED
WHT
BLK
RED
WHT
4
optical pick-up (16 core)
(CN1)
Page of 40
Display

Click on the first or last page to see other CDX-GT110 / CDX-GT11W / CDX-GT160 / CDX-GT160S service manuals if exist.